Wastewater Treatment Process Equipment
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Every customer has different needs. With Kurita´s broad range of coagulation and flocculation products, we meet the needs of various applications in different manufacturing processes in the field of construction, industry, water and paper. By clarifying make-up water and / or purifying waste water, we work together with our ...
-
PremiumManufactured by PHILOS Co. Ltd.based in SOUTH KOREA
Megaflux-eMBR is a submergible membrane module optimized for wastewater treatment MBR process. PHILOS has developed the highest performance composite membrane and anti-pollution technology. Megaflux-eMBR shows stable filtration performance for a long period of time even in the MBR wastewater treatment ...
-
Manufactured by EnviroChemie GmbH - part of the EnviroWater Groupbased in GERMANY
treated energy efficiently and with minimised disposal costs, using a combination of anaerobic and downstream aerobic treatment stages. Our Biomar plant solutions are used for wastewater in many industries, such as the food processing, chemical and pharmaceutical ...
-
Manufactured by EnviroChemie GmbH - part of the EnviroWater Groupbased in GERMANY
Anaerobe wastewater treatment is a proven technology for treating wastewater with high levels of organic contamination. Resource-saving wastewater treatment with a high degradation rate and energy recovery. Anaerobic processes for wastewater treatment are ...
-
Manufactured by Envirocare International, Inc.based in USA
EnviroCare’s Saracco Scum Concentrator is designed to enhance wastewater treatment processes and reduce scum handling, disposal and hauling costs. Saracco Scum Concentrators assure better BOD5 and SS capture, more efficient digester utilization and less costly incinerator operation. Drier scum concentrations slash hauling costs, too. ...
-
Manufactured by Ovivo - a subsidiary of SKion Waterbased in USA
The Ovivo stormBLOX Technology is a complete, membrane-based physical-chemical (P-C) treatment process designed to cost-effectively treat storm flows and reliably serve as emergency flow management in the event of biological process upsets. The technology is primarily intended to act as a secondary (side-stream) treatment and to ...
-
Manufactured by Gross-Wen Technologiesbased in USA
Gross-Wen Technologies uses its patented wastewater treatment technology, known as the revolving algal biofilm system (RAB), to cost-effectively address new wastewater permits that are being required at municipalities and industries. The RAB system uses vertically oriented conveyor belts that grow algae on their surface. While the algae ...
-
Manufactured by In-Situ Processbased in USA
The analysis of Phosphorus or Phosphate is a critical measurement in the monitoring and control of wastewater and industrial effluent treatment. By taking care to select the most appropriate analysis technique, taking a representative sample and preparing it correctly this measurement is readily achieved. Once a reliable, repeatable ...
-
Manufactured by Ideal Solutions Company Limitedbased in TURKEY
MBBR ( Moving Bed Bio Reactor) waste water treatment plant can be described as a confined space in which the organic digestive microorganisms get attached to specially designed plastic media called AGM ( Attached Growth Media) . The AGM Bio Media become carriers that build floating bed in the waste water. The Bio-Film grows on the bio ...
-
based in SPAIN
by obtaining high quality water that can be reused in washes and extreme minimization of completely dry solid waste, which must be managed as low and intermediate level waste (LILW). This means that cost saving compared to more conventional processes is quite significant. The NUCLEANTECH® UF6 process enables the treatment of waste water ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
The ELIQUO HYDROK IFAS (Integrated Fixed-Film Activated Sludge) system has been developed utilising the Biotextil Cleartec media for which Hydrok are the appointed sole UK distributor.When used in conjunction with the Aquaconsult AEROSTRIP diffusers this system offers even further efficiencies within the treatment process. Biotextil ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
downstream of humus or secondary settlement tanks (5mg/l TSS achievable) Tertiary phosphorus removal in combination with precipitation/flocculation - bespoke design for Ptot consent from 1mg/l to less than 0.1mg/l Micro-pollutant ‘Priority Substance’ removal As an alternative to fixed film biological treatment humus tanks for removal of TSS ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
Fine bubble aeration is a simple process, but one that consumes 0.481% of the total power generated within the United Kingdom. Therefore any efficiencies that can be found to reduce this demand make sound commercial and environmental sense. ELIQUO HYDROK can provide significant reductions in energy consumption, along with reduced whole life ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
. The HyER Diffuser Liftout Grids enables the rapid delivery of high efficiency oxygen transfer into treatment plants and water courses, helping to tackle and prevent pollution incidents. HyER Diffuser Liftout Grids offer the same high efficiency fine bubble diffused aeration using the Aquaconsult AEROSTRIP diffusers and are as robust a construction as ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
The Hydrok Hybrid Submerged Aerated Filter (HY-SAF) offers a power efficient, robust, small footprint biological wastewater treatment solution individually designed to achieve the final effluent consent standard required. HY-SAF package treatment works are suitable for treating municipal wastewater for 100-3,000 PE (Population ...
-
Manufactured by ELIQUO HYDROKbased in UNITED KINGDOM
ELIQUO HYDROK's Liftout Diffuser Grids are specifically designed to allow the operator to remove and maintain the Aquaconsult AEROSTRIP diffusers without the costly need to drain the aeration tank. The Hydrok liftout grids are advantageous to sites that have one, two or three tanks as it allows the operational capacity of the plant to be completely maintained whilst the liftout grids are being ...
-
Manufactured by Ellis Corporationbased in USA
The filter press is a great solution for solids separation in batch processes. Other technologies have minimum requirements for optimal solids separation and will not work unless there is a sufficient amount of feed available. The filter press has been engineered to deliver the best quality separation at lowest O&M cost. Other technologies ...
-
Manufactured by Ellis Corporationbased in USA
The Ellis Inclined Plate Clarifier (IPC) offers a large settling surface area in a very small footprint. Unlike the common clarifier, separation of solids is independent of the liquid volume. Instead the clarification is dependent on the available settling surface area. To maximize the settling surface area the Ellis IPC uses a series of closely spaced inclined plates. The driving force for this ...
-
Manufactured by Ellis Corporationbased in USA
The Ellis Oil Water Separator (OWS) is an effective technology in most oil-water separation applications. However, there are some applications that require pre-conditioning due to the oils being emulsified. Ellis engineers have responded by designing the Emulsion Breaking System (EBS). The EBS has been engineered to deliver the best quality separation at lowest O&M cost. Other technologies ...
-
Manufactured by Ellis Corporationbased in USA
Customers have different needs and goals in mind when it comes to selecting and installing process equipment such as Ellis tank systems. All Ellis tanks are customizable in diameter, length, width, and height. Typical applications include: chemical conditioning, settling and decanting, overflow storage, head pressure build-up, batch ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you