water analyzer Equipment available in Prince Edward Island

Available in Prince Edward Island| Near Prince Edward Island
926 Results found

We couldn't find any water analyzer equipment in Prince Edward Island

Here is a list of results available in Prince Edward Island

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: water analyzer ×

  • Available in: Canada ×

  • Available in: Prince Edward Island ×

Model TD-500D - Dual Channel Handheld Oil in Water Analyzer

by Turner Designs Hydrocarbon Instruments, Inc.     based in Fresno, CALIFORNIA (USA)

TD-500D featuring the least expensive, lightest, smallest, easiest to use, most accurate and most repeatable device on the market for measuring crude oil and condensates in produced water, de-salter tail water, tank bottoms, cargo heaters, or anywhere that crude oil comes in contact with water.

HORIBA LAQUA - Model F-70 Series - Benchtop pH/Water Quality Analyzer

by HORIBA Europe GmbH     based in Leichlingen, GERMANY

An Industry First intuitive control with the large capacitance touch panel. If problems occur during calibration or measurement, navigation will walk you through until the problem is solved. Easy to clean glass top and round body. LAQUA is both easy and fun to use!.

Tethys Instruments - Model UV500 - Online Water Analyzer

by Tethys Instruments SAS     based in Meylan - Inovallee, FRANCE

The UV500 is a on-line water analyser based on a high resolution UV-visible spectrograph. It allows to monitor simultaneously many different parameters for waste water treatment plants or chemical plants with an excellent stability and low operating cost. The same spectrograph can measure organic matter, nitrate, colour, turbidity, phosphate, ...

Tethys Instruments - Model UV400 - Online Water Analyzer

by Tethys Instruments SAS     based in Meylan - Inovallee, FRANCE

The UV400, based on a modular concept, allows to monitor simultaneously many different parameters for waste water or drinking water treatment plants as well as river monitoring stations. Each parameter corresponds to a specific optical module that can be selected by the user while ordering the analyser, depending on the application. Mainly based ...

Tethys Instruments - Model UV300-5D - Online Drinking Water Analyzer

by Tethys Instruments SAS     based in Meylan - Inovallee, FRANCE

The UV300-5D is a pre-defined configuration of the UV300 analyser dedicated to drinking water. It offers the possibility to monitor simultaneously FIVE parameters: - Total residual chlorine - Turbidity - pH - Conductivity - Temperature All this is done by a single unit that allows high performance measurements for an attractive price. An automatic ...

Tethys Instruments - Model UV400 ATEX - Online Water Analyzer for Ex Area

by Tethys Instruments SAS     based in Meylan - Inovallee, FRANCE

The UV400 ATEX, based on a modular concept, allows to monitor one or several parameters for process water, cooling water or waste water. The special enclosure and air purge system allows to use it on hazardous areas classified 'Ex' like refineries and chemical plants. Mainly based on UV spectroscopy, the UV400 ATEX can measure parameters like ...

InfraCal 2 - Model TRANS-SP - Oil in Water/Soil Analyzers

by Spectro Scientific     based in Chelmsford, MASSACHUSETTS (USA)

The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04.  With over 3,500 oil and grease monitors in worldwide use today, InfraCal 2 analyzers, originally developed by Wilks, have become a standard for the petrochemical ...

InfraCal 2 - Model ATR-SP - Oil in Water/Soil Analyzers

by Spectro Scientific     based in Chelmsford, MASSACHUSETTS (USA)

The InfraCal 2 ATR-SP is recommended for measuring oil in water, TPH in soil/drilling waste or FOG in wastewater using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04.  Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring ...

Metrohm - Model Plug and Analyze Series - Single-parameter Online Analyzers

by Metrohm AG     based in Herisau, SWITZERLAND

The Plug and Analyze series of online analyzers come complete, preconfigured, and programmed for their specific applications. Simply connect the power, sample, and reagent lines and the units are up and running producing reliable results. The analyzers can be used for monitoring a variety of components in water, such as silica, phosphate, ammonia, ...

Arjay - Model HydroSense 3420 - On-line ppm Oil in Water Monitor Analyzer

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The HydroSense 3420 offers a low cost approach to monitoring ppm concentrations of emulsified free oils in clean water. Combining many unique design features into a compact package makes this an ideal solution to monitoring for oil leaks in your water system.

Arjay - Model HydroSense 2410 - On-line ppm Oil in Water Monitor Analyzer

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The HydroSense 2410 is the engineered combination of three unique designs by Arjay. The sensing chamber contributes a continuous controlled water sample while the optical sensor package hovers above the passing stream. The Arjay controller then monitors the multiple signals to provide a reliable ppm concentration output.

Arjay - Model HydroSense 3410 - On-line ppm Oil in Water Monitor Analyzer

by Arjay Engineering Ltd.     based in Oakville, ONTARIO (CANADA)

The HydroSense 3410 offers a high accuracy approach to monitoring low concentrations of free and soluble oils in water. Combining many unique design features into a compact package makes this an ideal solution to monitoring for oil contamination in your water system. Fluorescence technology is selective to ppm levels of petroleum hydrocarbons by ...

Optilis - Model 301 - Multi-Wavelength Water Analyzer

by EFS Inc     based in Montagny, FRANCE

The Optilis 301 is an online multi-parameter analyzer which allows continuous automatic quality control of water and effluent. It allows simultaneous estimation of the general pollution parameters COD, BOD, TOC, SS, COLOURS and NITRATES.

OPTILIS - Model 201 - Dual Wavelength Water Analyzer

by EFS Inc     based in Montagny, FRANCE

The Optilis 201 is an online multi-parameter analyzer which allows continuous automatic quality control of water and effluent. The UV/visible absorption technology allows us to estimate the overall pollution parameters COD, BOD, TOC an SS simultaneously and instantaneously.

Model PH4000 - pH Probe

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

De Nora Water Technologies PH4000 probe for use with the MicroChem®2[S3] Series 4000 pH S4000 is simple to install and requires infrequent maintenance. The probe offers temperature-compensated measurement, optional cleaning nozzle for automatic cleaning, and a gel or liquid filled probe for typical or more aggressive drinking water and ...

Model Series 17T2000 - Amperometric Titrator

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Series 17T2000 Amperometric Titrator is an analytical instrument for the electrical determination of the end point of a titration for free, combined, or total chlorine residual. It can also be used to determine bromine, iodine, ozone, permanganate, and chlorine dioxide residuals. In addition, the titrator can be used to monitor the chlorite ...

Model 17P5000 - Permanganate Analyzer

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Series 17P5000 analyzer is an amperometric device designed to provide continuous measurement of the concentration of permanganate. The analyzer uses a flowthrough measurement cell containing two dissimilar metal electrodes. As the water sample flows past the electrodes, a current is generated which is directly proportional to the specific ...

Capital Controls - Model Series 17B5000 - Residual Chlorine Analyzer

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Capital Controls® Series 17B5000 residual chlorine analyzer isan amperometric device designed to provide continuous measurement of the concentration of residual chlorine inwater. The analyzer uses a flow-through measurement cellcontaining two dissimilar metal electrodes. As the watersample flows past the electrodes a current is ...

Bufferless Residual Monitor Dual Validation Unit (DVU)

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Series Dual Validation Unit (DVU) incorporates 2 independent Cl1000B bufferless residual analyzers. The control analyzer can be used to set the residual dose while the police analyzer validates the result. The analyzers are connected to a change over unit that monitors the results, sets alarms and can also be used to select the choice of the ...

Model Cl1000B - Residual Chlorine Monitor (Bufferless)

by De Nora Water Technologies     based in Colmar, PENNSYLVANIA (USA)

The Series Cl1000B Residual Analyzer represents the latest advance in residual analysis. With microprocessor-based electronics, this instrument offers precise control of the critical components in the measurement of chlorine. The result is the most accurate bufferless analyzer on the market today. Bufferless operation removes the growth and odor ...

Need help finding the right suppliers?

Let the XPRTs do the work for you