Water Control Equipment Near Arkansas
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PG series control valve is the preferred choice for pressure reducing valves, flow control valves, relief valves and applications with lower to medium flows. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain water ...
-
Manufactured by Mueller Water Productsbased in CANADA
An altitude pilot valve that is spring and diaphragm operated; it controls the water level in a reservoir by sensing the hydrostatic head. When the hydrostatic head equals the spring force, the pilot connects port “X” (connection to main valve inlet ) to port “K” (connection to main valve bonnet). The main valve ...
-
Manufactured by General Air Products, Incbased in USA
General Air Products offers a line of air cooled chillers packaged with pumps, a tank, and microprocessor controls. Our packaged air cooled chiller line is offered in a variety of sizes from ¾ ton cooling capacity up to 60 ton cooling ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PT and 106-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers that are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 206-PT and 206-PTC series control valves are hydraulically operated by introducing or releasing water from the control chambers. PT and PTC valves have two operating chambers which are divided from each other by the diaphragm, and are separated from the flowing media by an adaptor ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-PRO Overflow Measuring Profile System is designed to improve a weir’s hydraulic capacity and to accurately measure its overflow discharges. The ACU-PRO’s unique and extensively tested design utilizes the upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record the ...
-
Manufactured by Fresno Valves & Castings, Inc.based in USA
The Series 3600 Swing Check Valves prevent backflow in irrigation water control ...
-
Manufactured by United Rentals Europe, formerly known as BakerCorpbased in NETHERLANDS
The diagram below shows a typical petrochemical wastewater treatment system. When storage tanks are taken out of service for cleaning, the washwater is pumped out of the tanks and passed through various filtration devices. Intermediate and final storage tanks are used to facilitate disposal of clean water in a slow, controlled manner to ...
-
Manufactured by Cla-Valbased in USA
The Cla-Val 2 ½” Model 90-PRV-175-25 features a cast brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction; however, if full flow is required, the restriction can be overridden. This heavy-duty design is factory tested to 300 psi (2070 KPa). It is ...
-
Manufactured by Smith & Loveless Inc.based in USA
Smith & Loveless recommends a preventative maintenance provision to drain your PISTA® Grit Chamber once a year for inspection of the wetted items. Just like our pump stations, Smith & Loveless works to make everything easily accessible for the operator and technicians. Once drained, the floor of the chamber will have grit that has not made it to the grit hopper. Remember “you ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The OPTIFLUX 1050 is a cost-effective electromagnetic flowmeter (EMF) with lightweight wafer-style design. The meter is a very economical solution for simple applications with conductive liquids (≥ 5 μS/cm) involving low solid content (up to 10%). This particularly includes applications in water, wastewater, mobile applications, ...
-
Manufactured by GapVax, Inc.based in USA
The GapVax MC Series unit. Combination JetVac, is a wet-only machine, equipped with a unitized water and debris tank and double sub-frame. Heavy-duty double acting single-lift cylinder provides a stable 50 degree dump angle. The MC series is also equipped with an 8' front-mounted, telescopic boom with dual lift cylinders, reaching 26* with a ...
-
Manufactured by Cla-Valbased in USA
The Cla-Val 2 ½” Model 90-ADJ-PRV-25 features a Forged Brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction, however, if full flow is required the restriction can be overridden.This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also ...
-
Manufactured by SeaMetrics, Inc.based in USA
This unique system of 2' to 8' turbine meters uses just one moving part, a precision helical rotor. Rotation of the rotor is electronically detected and processed. The high-quality jewel bearings and shafts minimize friction while providing long life in non-lubricating fluids. The entire rotor assembly can be easily removed forfield service without removingthemeterfrom the pipe. WTP bodies are ...
-
Manufactured by Golden Harvest, Inc.based in USA
Golden Harvest Inc. Weir Gates are designed to control upstream water elevation and can provide a rough estimate of flow using notched gates via the downward- opening design. Weir gates function like slide gates, except that the disc opens downward allowing outflow to weir over the top of the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you