Water Cooling Tower Equipment Near Ecuador
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 100 – 10,000 g/h of chlorine. Ultra-pure or low-chloride and low-chlorate sodium-calcium hypochlorite requires specialist system technology. The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling ...
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
The EnviroTower cooling tower water treatment solution optimizes energy and water efficiencies while minimizing environmental impacts. Cooling towers represent up to 30% of a building’s overall energy budget, and 50% of the water used. The EnviroTower solution helps ...
-
Manufactured by Kimre Inc.based in USA
Drift is water lost from cooling towers as liquid droplets are entrained in the exhaust air. The drift loss is independent of the water lost by evaporation and may be expressed in units of lb/hr or percentage of circulating water flow. Drift eliminators are used to control this drift loss from the ...
-
Manufactured by Parkson Corporationbased in USA
it is discharged through a flanged connection. A number of applications are possible with the Oil/Water Separator technology including but not limited to groundwater, storm water runoff, oil and water reclamation, cooling towers, and industrial effluent treatment. Parkson’s SRM models, which are fabricated ...
-
Manufactured by Canariis Corporationbased in USA
Canariis Corporation offers a wide variety of packaged Water-Cooled Chiller Systems. Ranging from small to large they can be enclosed in prefabricated metal buildings with chilled water, condenser water and cooling towers. Our designers have years of experience and are ready to assist in ...
-
Manufactured by Filtronics, Incorporatedbased in USA
Electromedia VII is a unique permanent media filtration system integrating a special vessel design and a proprietary media. Electromedia VII is formulated for the filtration of cooling tower water at slightly elevated temperatures operating at near calcium carbonate saturation. Electromedia VII effectively removes calcium carbonate, iron and ...
-
Manufactured by Waterman Industriesbased in USA
. Each gate is designed and fabricated to the project’s installation and function requirements. Typical applications for Waterman Rectangular Butterfly Gates include water treatment facilities, water filtration projects, cooling tower basins, power plants, and many other water and flood control projects. ...
-
Manufactured by Aqualabobased in FRANCE
kind of water analysis urban, municipal and industrial waste water,, drinking water, boiler and cooling tower water, fish farming, natural ...
-
Manufactured by Tigerflow Systems, LLCbased in USA
Covers a wide array of pump units including primary, secondary for heating and cooling water systems and cooling tower ...
-
Manufactured by TOC Systems, Inc.based in USA
Expanding on the original El Paso Stripper, we are now offering additional capability for our TCEQ approved stripper. Automation, loss-of-sample, loss-of-carrier, and provision of sampling systems consistent with cooling tower applications, are provided. The chamber exchange has been simplified & total installation and maintenance ...
-
Manufactured by ECOMAX SOLUTIONS PVT LTDbased in INDIA
ECOMax-CT®; Electrolytic CT Water Treatment System is a chemical free water treatment for cooling towers and it works on the principle of electrolysis of water that reduces upto 80% blow down water consumption. The process is different from other non -chemical water treatment ...
-
Manufactured by WETS LLCbased in USA
The WETS cooling tower system is a water treatment device, typically used for cooling water from deep aquifers such as the Catahoula, which typically are high temperature and may contain higher volatile components such as methane, hydrogen sulfide and other noxious gases. Growing potable water ...
-
Manufactured by Rainwater Collection Solutions, Inc.based in USA
Harvested rainwater is a very clean and healthy source of water for many non-potable uses like outdoor irrigation, toilet flushing, laundry, cooling tower water and other outdoor needs. Even though rainwater is very clean, it will pick-up debris from the roof, gutters and down spouts. Most of this debris is easiest to remove ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily cleaned. The 2H NET 150 grid packings are ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our 2H Splash and Trickle Fills have been specially designed for medium to strongly polluted cooling water, the focus of the development being on a high stability as well as on easy and economical installation. Therefore these fills are built from mechanically joint grids and are easily ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H SANIPACKING drift eliminators are made of a special antibacterial PP compound. The biocide impregnated compound disrupts the metabolic process of unwanted micro organisms at the cell wall level, thus interrupting their ability to function, grow and reproduce on the 2H SANIPACKING. Combined with regular maintenance and correct water ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Reduction Of Risk Of Legionella Pneumophila In Open Cooling Circuits; Time and again news report about outbreaks of legionella disease in areas near cooling towers. Careful water treatment, together with regular maintenance reduces the risk of bacteria growth in the cooling circuit. But one step more leads to an ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the amount of sunlight entering the ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
2H PLASdek and CLEANdek vertical flow fills are designed for the use in counterflow cooling towers with poor water quality. With different types in PP, PVC and PPHT and different material thickness, our fills cover all customer requirements. Fill media in flame retardant or anti-bacterial types are available on request. 8earing capacity and ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Optimal heat transfer properties – low pressure drop; Generally, every cross fluted fill could be cut to be installed in a cross-flow cooling tower. Such a fill, however, would not perfectly fit the requirements; we therefore developed a special range of fill for this type of tower (FX12.12 or KSN with a drift eliminator section KSA and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you