Water Cost Equipment Near Libya
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The safe way to handle organic solvents with the Mini Spray Dryer S-300. The safe way to spray dry organic solvents is to use the Inert Loop S-395 as the ideal accessory for your Mini Spray Dryer S-300. Its innovative design makes spray drying of organic solvents more environmentally friendly, cost-efficient and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Wastewater professionals once accepted the high costs of operating wastewater treatment facilities as a consequence of meeting their discharge permit requirements. As the cost of energy rises and emphasis on renewable energy increases, local authorities and municipalities are seeking solutions that save money and meet renewable requirements. ...
-
Manufactured by Tecnicomar S.r.l.based in ITALY
The Tecnicomar semi-automatic TFD filter represents an exclusive water filtration system based on a swirl effect. That allows a drastic reduction in the number of washes, saving water, energy and labor costs. The swirl is obtained by means of a propeller at the filter inlet. The propeller creates a twisting motion to the incoming ...
-
Manufactured by KMU LOFT Cleanwater GmbHbased in GERMANY
The KLC-DI water circulation system (DIP) produces ultrahigh quality demineralised water. The system has been specifically designed to produce desalinated water and to recirculate rinse ...
-
Manufactured by Goulds Water Technology - a Xylem brandbased in USA
A variable speed controller complete with a water end (pump) and three phase motor conveniently packed in one carton for installer convenience. Kits are available with 2, 3 or 5 HP controllers and motors from 1.5 to 5 HP. They feature pump/motor combinations sized for high speed operation, units are configured to operate between 30 and 80 ...
-
Manufactured by Ovarrobased in UNITED KINGDOM
PRIMEPROBE is a bi-directional insertion full bore electromagnetic flowmeter for permanent or portable use in managing water distribution systems. It is a cost effective alternative to full-bore flow meters and is ideal for use over a wide range of flows and pipe ...
-
Manufactured by Muntersbased in USA
paper sheets with different flute angles, that have been bonded together. This unique design yields a cooling pad with high evaporation efficiency while still operating at a very low pressure drop. In addition scaling is kept to a minimum and no water carry-over occurs due to the fact that the water is directed to the air inlet side of the ...
-
Manufactured by Muntersbased in USA
paper sheets with different flute angles, that have been bonded together. This unique design yields a cooling pad with high evaporation efficiency while still operating at a very low pressure drop. In addition scaling is kept to a minimum and no water carry-over occurs due to the fact that the water is directed to the air inlet side of the ...
-
Premiumbased in NETHERLANDS
Online real-time biofilm monitoring BIoGEORGE BG4 Biofilm Growth Detector – Biofilm Control Monitoring ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
a water repellent film on the surfaces. Increasing the water repellency greatly improves heat transfer efficiency. The productivity of industrial processes increases significantly. At the same time the steam consumption is reduced leading to less fuel consumption and cutting down costs for water and energy. Kurita Dropwise ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Innovative technology based on filming amines for boiler water, steam generator and closed systems – Cetamine.Cetamine is an innovative and comprehensive technology based on film forming amines (often referred to as polyamines or fatty amines). Cetamine prevents scale formation and corrosion in feed water tanks, feed water lines, ...
-
Manufactured by Scalewatcher North America Inc.based in USA
the concept but also thanks to managers of companies in Industry who in the early days, were not afraid being laughed at while evaluating the performance of Scalewatcher in the field. Physical water treatment has gained it place in Industry as a high tech and reliable means of mineral scale ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
Fracta is a cutting-edge solution using machine learning and artificial intelligence to detect water leaks to anticipate water network maintenance and operations. The world is covered by millions of kilometres, then water monitoring is essential. As an eco-responsible player, we have to participate actively in the monitoring and ...
-
Manufactured by Eldan Recycling A/Sbased in DENMARK
The Water Separation System is a cost effective solution to recover metal dust and fine wires from the plastic fraction after the metal separation. By using a well-balanced combination of water, table inclination and oscillating movements you will get an almost clean plastic fraction with metal losses as low as 0.2%. The metal fraction will ...
-
ShowcaseManufactured by Kurita Water Industries Ltdbased in JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
-
Manufactured by Denkim Denizli Kimya Sanayi ve Ticaret A.Ş.based in TURKEY
Dencell-T type is commonly used in thread sizing process and preparation of printing paste, and is preferred for easily and quickly soluble in cold water, film formation, and adhesive power. It enhances the weaving performance and can be removed after weaving without using an enzyme thus the need for water and steam is decreased. It can be ...
-
Manufactured by Darnasus Engineering Ltdbased in CYPRUS
Darnasus is specializing in design, construction and operation of reverse osmosis facilities, treating seawater or brackish water, varying in size from a few cubic meters per day up to several thousand cubic meters per ...
-
Manufactured by Primozone Productions ABbased in SWEDEN
Protecting your ozone equipment from water backflow is a cost-effective, straightforward way to ensure uptime performance and problem-free operation in an ozone ...
-
Manufactured by Panta Rei Srlbased in ITALY
When the client desires to comply with certain company policies or local regulations requiring him to avoid any final discharge, a series of treatments need to be considered in order to recycle the water and dispose of the residual ...
-
Manufactured by Diversitechbased in CANADA
This Wet Dust Collection Booth offers a simple, customizable and turnkey solution to handle combustible dust collection for larger work pieces. The stainless steel Wet Dust Collectors serve as the booth’s filtration hub, and range in size from 3000CFM, 5000CFM, and 6500CFM units. A standard auto-level water control system works to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you