Water Debris Equipment Available In American Samoa
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
The PR-BW 600 is a universal backwash filter which is used in high-performance areas for volumetric flows of up to approx. 20,000 m³/h. This filter concept has been designed to deal with the usual problems that arise in these processes that do not involve special requirements. It has a compact design, is easy to maintain and cost-effective. ...
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
The tried-and-tested backwash filter for cooling water and other liquids. The PR-BW 100 is an automatic backwash filter which captures macrofouling and particles from cooling water and other liquids. It is suitable for small and medium volumetric flows of up to 5,000 m³/h and its compact design means it can also be installed in ...
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
; are available in a range of 50 to 1,000 microns and are particularly effective against mussel larvae which now have the potential to cause serious problems. Continuous fine filtration of cooling water and other ...
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
The PR-BW 400 is an automatic backwash filter which filters macro particles from liquids, particularly cooling water for turbine condensers and heat exchangers. Outstanding features of this filter include the redundant safety technology, which provides four times the amount of protection against outages, and its ability to safely ...
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
from the cooling water flow. Condensers, plate heat exchangers and other loads connected downstream are reliably protected from macrofouling. In addition to their use in power stations, this model series can also be used in various other industrial applications. ...
-
Manufactured by Taprogge Gesellschaft mbHbased in GERMANY
of macrofouling from cooling water with its exceptional debris discharge capacities. It also effectively protects turbine condensers, heat exchangers and other consumers that are connected downstream from troublesome macrofouling ...
-
Manufactured by Muhr GmbHbased in GERMANY
With Muhr conveyor systems and transport systems, the removal of floating debris is both efficient and safe: since all of the components are perfectly coordinated to the trash rack cleaning system and your local ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLO Compact Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7 100 gpm (450 L/s) for upstream water levels varying from 0 to 26 feet (8 m). The TRU-FLO Compact Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer ...
-
PremiumManufactured by KEG Technologies, Inc.based in USA
The Forward Jet Nozzle has six factory drilled forward inserts with one center forward interchangeable insert and zero rear inserts. This nozzle is only available in .5” connections. The Forward Jet Nozzle propels water through the forward nozzle and breaks up the clog or pipe obstruction, washing away the debris from the ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Ultra-Hard Top P2 -1083 Outdoor Secondary Containment Storage Systems Keep The Elements Out While Providing Convenient Access To ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SELF Self-Adjusting Floating Baffle System is designed to reduce floating debris from entering storm water overflow systems, combined sewer overflow (CSO) systems, sanitary sewer overflow (SSO) systems, retention tank overflows and basin overflows. The ACU-SELF can also be installed in channels or culverts where floatables ...
-
PremiumDistributed by Interstate Products Inc. / Interstate Productsbased in USA
Outdoor Secondary Containment Storage Systems Keep The Elements Out While Providing Convenient Access To ...
-
Manufactured by State Industriesbased in CANADA
Directs and deflects water and debris. High tear, impact and shear resistance. Longer life comparing with Rubber and steel deflectors. Hardness: ...
-
Manufactured by Weening Brothers Mfg. Inc. (WBM)based in CANADA
Weening Brothers Hydrosieve are used to filter out waste. Using wedge wire technology the water flows through and the debris fall down the screen. The wedge design allows this to happen without clogging the filter. The design can be custom fit to accommodate any volume of water and sizes of debris that need to be ...
-
Manufactured by NLB Corp.based in USA
A VacLance attachment contains the water and debris produced by water jet product removal, maximizing your productivity. Models DM16546 and DM32283 work on vertical or horizontal surfaces and fit any NLB rotating lance. DM32283 is designed to work in corners, ...
-
Manufactured by Robert H. Wager Company, Inc.based in USA
The 1500 Series-90 is designed for installations where a 90 degree mount is necessary. The flanged outlet mounts with a 90 degree turn instead of our standard vertical mount. The 1500-90 allows for ventilation in the open position, and a disc style float will rise in the event of heavy seas and prevent sea water and debris from entering into ...
-
Manufactured by Fapre Industrial Co., Ltd.based in CHINA
as a scraper to trap water and debris. Ideally suited for loose lay applications for walkways, treadmats, runners, shelving, work benches, flooring and with an attractive clean matt black ...
-
Manufactured by Transco Industries Inc.based in USA
Protects your water system from fish, sticks, moss, trash and other water-carried debris. Made in USA. Screens available in all widths and depths. Eliminates costly monitoring and cleaning. Available in all mesh sizex - fine to coarse. Protects pumps and prevents costly repairs. Reduces water system downtime. Available with ...
-
Manufactured by RCB Bearing Corp. Ltd.based in CHINA
Bearings for iron and steel works operate under a variety of harsh conditions, including high temperatures, high speed or super low speed operation, as well as environments contaminated with water and debris. RCB Bearings support the stable operation of machine under the toughest conditions. RCB has for many years provided bearing ...
-
Manufactured by Robert H. Wager Company, Inc.based in USA
Wager’s model 1500 vent check valve is mounted vertically on the deck of a ship. In the open position, the valve allows for required ventilation. During heavy seas, our disc style float rises to a buna seat, and prevents water and debris from entering tanks and bulkheads. A 30 x 30 mesh stainless steel screen provides protection from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you