Water Discharge Equipment Near Myanmar
-
Manufactured by ScaleBuster - Ion Enterprises Ltdbased in UNITED KINGDOM
The ScaleBuster is a physical water conditioner that inhibits scale and corrosion. The electrostatic device uses the dielectric characteristics of the special plastics and metallic materials of its construction combined with the hydraulic conditions present during operation to force the precipitation of solid crystals in the water. The ...
-
Manufactured by Forbes Marshallbased in INDIA
FMSC - T3 provides Reliable Analysis for Raw Water, Effluents and Treated Water applications. Applications include Potable water, Filter efficiency and backwash, Surface water monitoring of lakes, rivers and streams, Water recycle and discharge, Plant effluent and offsite water, ...
-
Manufactured by Forbes Marshallbased in INDIA
The turbidity sensor uses the 90 degrees scattered light method, a global EPA standard. The built-in wiper cleaning system easily keeps the lenses clean. SS316L sensor with hard-to-scratch sapphire glass as measuring head, cable length of 10m and IP68 protection. ...
-
PremiumManufactured by AMS, Inc.based in USA
AMS Port-A-Reels are convenient for purging and sampling wells with an electric submersible pump. All of the components are built-in to the system – including the pump, motor cable and hose. The rugged powder-coated frame has large, 16'' pneumatic tires with extendable swivel castors on the front. The boom is extendable to accommodate different well casing heights. The units are also ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This small, lightweight mechanical current velocity meter has a measuring range of approximately 0.1 m/sec. to 7.9 m/sec. The meter is used for current velocity measurements in rivers, channels, sewage systems, pipes, etc. Suspended from a wire the meter can be applied at great depth. The meter is balanced in such a way that it will remain in a horizontal position even if the meter for instance ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The instrument is used for the accurate determination of the current velocity in water ways, channels, rivers and the sea. The meter can also be applied in polluted water currents. The measurements are executed with the propeller mounted on the rod(s) or connected to a cable. The current velocity meter has a measuring range of 0.025 to 10 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The mini current meter with one aluminium propeller is used in small ditches, with low water levels. Measuring range 0.03 to 2.5 m/sec. The instrument is included in a complete set. ...
-
Manufactured by Associated Pneumatic Industries Private Ltd (API)based in INDIA
125 mm stroke length of the handle provides a water discharge of 17 liters per hour with the cylinder installed in the range of the 15 m to 45 m below-ground level. The water tank assemble has the appropriate coupler to suit 65 mm or 50 mm NB GI pipes. A special cone plate with rubber cone is available for installation of PVC/HDPE/FGP riser ...
-
Manufactured by Chuan Yi Electric Machinery Works Co., Ltdbased in TAIWAN
The vacuum pump with special design rotor, that can work 24 hours continuous operating without overheat. ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
In this process, various types of organic waste are prepared for liquid fermentation (dry matter less than 12%m). They can include packaging and contamination. Preshredding, using a Terminator and screen drum or Crambo, prepares the material for subsequent dissolution and contrary separation. The latter is done in 3 steps. Step 1 is pulping, step 2 is a combination of Multistar wet screening with ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
are a unique solution to the problem of continuously and accurately measuring oil content in water; monitoring oil content in boiler water; monitoring process water for hydrocarbon break through; monitoring waste water discharge to meet regulatory requirements. Continuous monitoring meets water ...
-
PremiumManufactured by Weda ABbased in SWEDEN
Weda W50 is a compact cleaner with a high cleaning capacity with rotating brushes and a pump that delivers 600 liters per minute. It can be equipped with a discharge hose outlet for removal of all sedimentation independent of ...
-
Manufactured by HF scientific, Inc.based in USA
of unattended operation. The CLX-XT2 offers complete control of dosing & monitoring ballast water discharge through user-selectable sample cycle times, 4-20mA and RS-485 with Modbus output for controlling feed pumps, and user-selectable alarms. The CLX-XT2 is housed in a strong, steel-coated IP56 (except fan IP54) case offering easy access to all ...
-
PremiumManufactured by CETCObased in USA
Specifically designed to meet the increasingly stringent water quality and discharge regulations required by municipalities, ACCOFLOC flocculant aid reduces turbidity and total organic (TOC) in addition to removing trace metals from water or wastewater. High-activity sodium bentonite clay to the rescue. ...
-
Manufactured by Automeck - Shree Sahajanands Automeck Private Limitedbased in INDIA
Features: Pressure Washers Range : From 40 - 500 Bar, Water Discharge: 6 - 290 LPM, Image. Applications : Railway Coach Cleaning, Industrial Cleaning, Floor Cleaning, Plant Equipments Cleaning, Fogging, Concrete Equipment & Vehicle Cleaning, Mining Vehicle & Mining ...
-
Manufactured by Automeck - Shree Sahajanands Automeck Private Limitedbased in INDIA
Features: Pressure:150-500 Bar/2175-7250 Psi, Water Discharge:8.5 Ltr. To 50 Ltr., Hot Water Discharge Temp.:50 To 150 Degree, Boiler Type: Automatic, Self Priming (3 Mtrs. Vertical), Trolley Mounted & Easy Moveable, In Built Fuel & Detergent Tank ...
-
Manufactured by Automeck - Shree Sahajanands Automeck Private Limitedbased in INDIA
Features: Pressure:150-250 Bar/2175-3625 Psi, Water Discharge:8.5-21 LPM, Variants:Trolley/Tanker/Vehicle Mounted, Self Priming (3 Mtrs. Vertical), Water & Labour Cost Saving Upto ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Memosens disinfection sensor for wastewater and process water. Total chlorine is the mixture of free and bound chlorine components and thus a good indicator of residual disinfectants in discharge water. CCS120D provides reliable monitoring of total chlorine limits in the outlet. It reduces your maintenance effort due to easy ...
-
PremiumManufactured by Kurita Water Industries Ltdbased in JAPAN
by removing the overspray as dry sludge and it goes one step further than classic treatments performance by improving overall system efficiency. Main functions of the treatment products are reducing the stickiness of overspray paint and improving paint separation from water. As a result, increase in water recycle rate in addition to less generation and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you