water distribution plant Equipment

Showcase

Model HMC-RP - Pressure Reducing Valve

The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating pilot drives the valve. The pilot is able to detect upstream pressure values and regulates closing steps of the valve until the pre-set pressure value is ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-SP - Pressure Sustaining Valve

The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may open gradually to allow surplus water flow outside the system in order to maintain system pressure to a maximum pre-set value. A hydraulic regulating pilot ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HMC-ALT - Altitude Control Valve

This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-PP - Proportional Piston Actuated Valve Designed for High Differential Pressures

The valve maintains downstream pressure to a constant and pre-set rate of upstream value. No pilots needed. The valve chamber is directly exposed to the downstream pressure and this varying pressure value modulates the valve to open or close according to upstream ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-GAD - Float Control Valve

allows tank inlet until maximum water level is reached ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-RP - Pressure Reducing Valve

The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating pilot drives the valve. The pilot is able to detect upstream pressure values and regulates closing steps of the valve until the pre-set pressure value is ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-QP - Flow Control Valve

The valve controls downstream flow to a pre-set and constant value in order to limit water consumptions and preserve pipeline fill rate or to set a maximum demand value. The valve is controlled by a differential hydraulic pilot that senses the pressure fall generated by water flow into a calibrated ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-CP - Pump Control Valve

The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-EL - Electrohydraulic On / Off Valve

The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper chamber in order to close the main valve or, alternatively, drains upper chamber in order to open the main valve. ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HMC-NR - Check Valve

The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation's speed during closing, preventing ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-SV - Excessive Flow Valve

The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed closing completely main flow when senses critical speed ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Masdaf - Model OMKV - Multistage Centrifugal Pump

Design: The OMK-V Pump is a vertical axis, radially split, ring section design multistage centrifugal pump of non-self priming type. Impellers are between bearings, single entry, closed type and dynamically balanced. Impeller diameter will be corrected for optimal adherence to the required duty point. The axial thrust is relieved by relieving boreholes in each impeller. The remaining thrust can ...

By MAS DAF MAKINA SAN. A.S. based in Aydınlı, TURKEY. from Multistage Pumps - Vertical Multistage Pumps Product line

Premium

Model HMC-SR - Quick Relief Valve, To Avoid Water Hammer

This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks - Hydromodul C Product line

Premium

Model HM-ALT - Altitude Control Valve

This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely open until the closing input is transmitted by the 3-ways piezometric altitude ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-GAL - Modulating Type Float Control Valve

The valve assures maximum water level into tanks and reservoirs and avoids overflow. The valve operate by means of a modulating float, mounted on tank, able to regulate gradual opening of the valve when water level goes down from ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-SR - Quick Relief Water Valve to Avoid Water Hammer

This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure rising. Quick relief valve opens due to both pressure rises and falls, fully reducing any pressure ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

Premium

Model HM-NR - Check Valve

The valve closes totally the pipe line when back flow occurs. The valve is complete with an hydraulic control circuit able to regulate operation’s speed during closing, preventing ...

By Tecnidro Srl based in Genova, ITALY. from Waterworks Valves - Hydromodul Series Product line

HORIBA - Model TW-100 - Water Distribution Monitor

HORIBA’s TW-100 is a process water quality measurement system designed for drinking water and water distribution plants. The TW-100 monitors turbidity, color, free chlorine and pressure. This chemical free method reduces operating costs as it requires minimal maintenance and improves process ...

By HORIBA Europe GmbH based in Leichlingen, GERMANY. from Process & Environmental - Water Treatment & Environment Product line

Geiger - High-Capacity Drum Screens

The Geiger large rotating Drum Screens are typically installed in cooling water intake systems downstream from trash rakes or coarse bar screens. Debris is removed by efficient filtration at Geiger High-Capacity Drum Screens upstream of circulating water pumps. In this way the filtrated water distributed to a ...

By Aqseptence Group GmbH based in Aarbergen, GERMANY. from Geiger Product line

Model F - FF - 4 Inch Electric Submersible Pumps

Submersible multi-stage centrifugal pumps for 4” wells, particularly suitable for water-upsurge and distribution plants requiring very high pressures and ...

By Umbra Pompe Srl. based in Loc. Soccorso Magione (PG), ITALY.

Subscribe to our eBulletins