Water Flow Control Equipment Near Senegal
-
Manufactured by Deckma Hamburg GmbHbased in GERMANY
The OMD-2008 EV FC MCU is equipped with a Flow Sensor. The Flow Sensor is positioned in the Drain line of the Measuring Cell. If the flow rate through the Measuring Cell is too low, or if the sample is not flowing at all, the Instrument will go to Alarm condition and issue a “Status: Flow?” message. ...
-
Manufactured by Körting Hannover AGbased in GERMANY
The system shown in the sketch achieves a suction pressure of 1 mbar. The temperature of the available cooling water determines which pressure can be reached in the first mixing condenser. In this example, two ejector stages have been series-connected to achieve a suction pressure of 1 mbar with the lowest possible use of motive flow. Two ...
-
Manufactured by ProMinent GmbHbased in GERMANY
2.5 – 2,000 g/h chlorine dioxide. Maximum volume of water that can be treated with metering of 0.2 ppm ClO2, depending on the size of the system: 50 - 10,000 m3/h Chlorine dioxide system for the metering of chlorine dioxide with diluted starting chemicals. The certified yield guarantees efficient chlorine dioxide production. Bello Zon CDVd ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Controller AEGIS II continuously measures and controls the conductivity and biocide concentration to keep pipework and heat exchangers ...
-
Manufactured by ProMinent GmbHbased in GERMANY
The cooling tower regulator SlimFLEX 5a continuously measures and controls conductivity and controls biocide metering, keeps pipework and heat exchangers clean and prevents ...
-
Manufactured by ProMinent GmbHbased in GERMANY
The modular bypass armature BAMa accommodates ProMinent sensors for water treatment. The armature is simply installed in a bypass of the main process line. It is available in various variants, each perfectly designed for special water treatment applications – from drinking water, water for pool & wellness to industrial ...
-
Manufactured by Tisch Environmental Incbased in USA
Includes size selective inlet (<10 micron cut size), anodized aluminum shelter, 8' x 10' stainless steel filter holder with stagnation pressure tap, blower motor assembly, continuous flow/pressure recorder, solid state digital timer programmer with digital elapsed time indicator, 30' water manometer, volumetric flow controller ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Camera-based measurement system for acquisition of the surface velocity profile and water level // Direct calculation of the discharge // Non-intrusive measurement method using only one sensor (camera) // Data storage and remote transmission of measurement data and images // Intelligent alarm management ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Petroleum hydrocarbons analyzer AE-2 is designed for continuous automatic monitoring of content of petroleum hydrocarbons in potable, natural, and waste water. The instrument comprises a sample preparation unit and a fluorescence detector. The sample preparation unit provides metered water feed and switching of the water and reagent ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Complete flow control of ultrapure water through a liquid particle counter is critical to ensure accurate and actionable data. Particle Measuring Systems (PMS) offers the new FC-200 and FC-100 series of pressure balancing flow controllers as the perfect complement to our high precision liquid particle counters. ...
-
Manufactured by Krohne Messtechnik GmbHbased in GERMANY
The DWM 1000 is a 2-wire electromagnetic flow controller to monitor the flow of conductive liquids, pastes and slurries. The switching point of this insertion-type device is adjustable over a full-scale range of 0.1 …9.9 m/s or 0.3…32.5 ft/s. A welding socket is supplied as standard for welding the DWM 1000 directly onto ...
-
Manufactured by Hidritecbased in SPAIN
The reverse osmosis plant in container allows the treatment of potable water that is high in dissolved solids, brackish water or even sea-water. The plant is assembled in a maritime container of 20-foot or 40-foot, depending on the model, making transportation and the location of its final destination ...
-
Manufactured by EmiControlsbased in ITALY
The TAF35 is a versatile tracked vehicle designed for firefighting. The extinguishing turbine has been mounted on a compact crawler vehicle. The turbine is fitted with a nozzle ring which atomizes water and extinguishing foam to form fine particulate matter. This water or water/foam particulate matter is distributed by a propeller. The ...
-
Manufactured by Orbinoxbased in SPAIN
Pivoting taintor / radial gate for installation in channels and dam spillways either as a water / wastewater flow control or as a dam outflow regulating and discharge system. Spillway taintors are sealed on 3 sides, while sluiceway taintors are sealed on 4 sides. Wide range of sizes and special materials to match specific ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
The SprayCannon 40 is a fog machine that produces a curtain of micro-droplets. The curtain suppresses dust in open and closed spaces by binding dust particles in the air so they fall to the ground through gravity (air cleansing). The SprayCannon suppresses dust in an environmentally friendly and efficient way at crushing sites, demolition sites, when handling raw materials or cross-docking bulk ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
Every dust problem is unique. That's why we work closely with our customers to find the right solution. We specialize in machines made to measure. Each dust problem needs a specific ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
Every dust problem is unique. That's why we work closely with our customers to find the right solution. We specialize in machines made to measure. Each dust problem needs a specific ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
Extra-powerful automatic mist cannon with a spraying range of 50 m. The SprayCannon produces a fine mist and cleanses the air of the finest dust particles. The integrated fog machine is made of stainless steel. The SprayCannon suppresses dust in an environmentally friendly and efficient way at crushing sites, demolition sites, mining, when handling raw materials or cross-docking bulk ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
Extra-powerful automatic mist cannon with a spraying range of 75 m. The SprayCannon produces a fine mist and cleanses the air of the finest dust particles. The integrated fog machine is made of stainless steel. The SprayCannon suppresses dust in an environmentally friendly and efficient way at crushing sites, demolition sites, mining, when handling raw materials or cross-docking bulk ...
-
Manufactured by MB Dustcontrol B.V.based in NETHERLANDS
Every dust problem is unique. That's why we work closely with our customers to find the right solution. We specialize in machines made to measure. Each dust problem needs a specific ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you