Water Hammer Equipment In Denmark
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a controlled and smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. The valve is fitted with a compact integral pneumatic ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a controlled and smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. The valve is fitted with a compact integral pneumatic ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a controlled and smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. The valve is fitted with an external heavy duty solenoid ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a controlled and smooth opening and closing of the deluge water supply is called for. The valve's adjustable restrictors can be set to provide the opening- and closing speed desired, to prevent the damaging effects of reaction forces and water hammer. The valve is fitted with an external pneumatic actuator to ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
the damaging effects of reaction forces and water hammer. The valve is fitted with an external heavy duty solenoid and a pneumatic actuator valve to facilitate reliable electrical and/or pneumatic actuation. Both actuators are fitted with a latch that locks the deluge valve open when activated, thus requireing manual re-setting to ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
forces and water hammer. The valve is fitted with an external heavy duty solenoid valve to facilitate reliable electrical activation. The solenoid is fitted with a latch that locks the deluge valve open when activated, thus requireing manual re-setting to ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
of reaction forces and water hammer. The valve is fitted with an external pneumatic actuator to facilitate activation from e.g. pilot line air pressure drop. The actuator if fitted with a latch that locks the actuator and deluge valve open when activated, thus requireing manual re-setting to ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
start the C-300 valve pilot will monitor the pumped pressure and starts to close untill the pump pressure equals the pilot set-pressure of the C-300 valve, thus providing a controlled fire pump pressure increase to the pipe system - and preventing the damaging effects of surge and water hammer. For optimum pressure surge control the C300 valve ...
-
Manufactured by AVK International A/Sbased in DENMARK
53/30-005 - AVK ball check valves are self-cleaning and with full bore. The ball rotates during operation eliminating the risk of impurities getting stuck on the ball. The full and smooth bore ensures full flow with low pressure loss and eliminates the risk of deposits at the bottom. AVK ball check valves are available with flanges and internal threads. They are delivered with NBR lined ball as ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a constant downstream pressure is required, irrespective of the fire pump pressure. The deluge valve is fitted with a pressure control pilot that constantly monitors the downstream pressure and modulates the C-300 valve elastomeric orifice to open and close and maintain the pre-set downstream ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Measuring the quality and quantity of wet steam, saturated steam and superheated steam. Steam has long been an indispensable source of energy in the process industry. Here, 40 percent of fossil fuels alone are used for the generation of steam. With Prowirl F 200, you have the energy and cost efficiency of your steam system well under control. This animation shows why, and explains how Prowirl can ...
-
Manufactured by AVK International A/Sbased in DENMARK
41/36-001 - AVK series 41 swing check valves come with both metal and resilient seats. Installed in pumping applications to prevent back flow they can be used for drinking water as well as waste water. The disc is connected to the shaft via a flexible bush that allows disc and valve seat to adjust exactly. All interior parts are stainless ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
) to control the water release from the sleeve cavity via the 1/4" NPT ...
-
Manufactured by GW Sprinkler A/Sbased in DENMARK
This valve is used where a controlled constant pressure is required for a downstream wet system - e.g. water supply to fire hydrants. The valve provides an alarm signal via TP5 port when activated. The valve has no actuator. During set-up (commissioning) the downstream pressure is pumped slightly higher than the pilot set-pressure setting, ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost-effective wafer flowmeter, available as compact or remote version. The Prowirl D sensor can be installed directly between flanges and thus serves as the functional device for applications in ancillary processes at little installation cost. With genuine loop-powered technology, Prowirl D 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest ...
-
Manufactured by Danish Wastewater Equipment A/S (DWE)based in DENMARK
Suction scraper bridge type KD 15R for rectangular tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as ...
-
Manufactured by Danish Wastewater Equipment A/S (DWE)based in DENMARK
Suction scraper bridge type KD 15C is available for circular primary and secondary tanks. The suction scraper bridge is designed based on the desire for a long service life as well as making operation and maintenance of the equipment as minimal as ...
-
PremiumManufactured by Phathombased in NEW ZEALAND
Phathom’s multi-beam turbidity sensors provide unrivalled accuracy that single-beam sensors simply can’t supply. Phathoms generate multiple light beams that are synthesized into a ratio-metric algorithm that, once calibrated, precisely calculates turbidity or total suspended solids and self-compensates for common sources of measurement error. ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you