water hammer equipment in France

  • Model 500 & 2000 L - 10 Bar Hydrochoc Surge Vessel

    The Hydrochoc surge vessel is a hydropneumatic bladder accumulator which dampens water hammer in transients.

    By Charlatte Reservoirs based in Migennes, FRANCE. from 10 Bar Hydrochoc Surge Vessel Product line

  • Model 500 & 2000 L - 16 Bar Hydrochoc Surge Vessel

    The Hydrochoc surge vessel is a hydropneumatic bladder accumulator which dampens water hammer in transients.

    By Charlatte Reservoirs based in Migennes, FRANCE. from 16 Bar Hydrochoc Surge Vessel Product line

  • Back Pulse Hammer (BPH)

    The Back Pulse Hammer (BPH) is a pulse generator, which delivers high frequency “block” pulses, from the permeate side, back through the membrane in order to keep the membrane clean and free of foulants, thereby functioning as a flux maintenace tool. Originally, the BPH was developed to remove fouling caused by humic acid from surface ...

    By LiqTech International A/S Office in Echirolles, FRANCE. from Back Pulse Hammer (BPH) Product line

  • Fraste - Model FS 250 - Mineral Exploration Drilling Rigs

    FRASTE EXPLORATION FS 250 - 12 ton pulling capacity – extremely compact and maneuvrable drilling rig. It can perform with all drilling systems: direct/reverse fluid circulation, DTH hammer, RC Hammer drilling and Wire Line Coring, with angle drilling capacity up to 45°. Specially designed for water wells, Geothermal drilling and Mineral ...

    By Fraste S.p.A. Distributor in CURTAFOND, FRANCE. from Mineral Exploration Drilling Rigs Product line

  • Dehaco - Model IBEX 3000HS - 30 - 45 ton - Hydraulic Breakers

    The new series of IBEX HS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, solid housing and a modern appearance, is low maintenance and suitable for 30 to 100 ton excavators. These hydraulic hydraulic breakers ...

    By Dehaco B.V. Distributor in Paris, FRANCE. from Hydraulic Breakers Product line

  • Massenza - Model MI8 - Drilling Rig

    Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI20 - Drilling Rig

    The rig is designed for drilling up to 450 m and is used for water wells, geothermal applications, geotechnics, coring, seismic. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling methods: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Dehaco - Model IBEX 70GS, 0.8 - 1.8 ton - Hydraulic Breakers

    With impact forces from 250 to 12,150 joules, the new series of IBEX GS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, robust housing and a modern appearance, is low maintenance and suitable for 0.8 to 55 ton ...

    By Dehaco B.V. Distributor in Paris, FRANCE. from Hydraulic Breakers Product line

  • Massenza - Model MI3 - Drilling Rig

    Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI12 - Drilling Rig

    It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. All controls are ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI45 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI50 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI60 - Drilling Rig

    The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI4 - Drilling Rig

    The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI40 - Drilling Rig

    Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI28 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • Massenza - Model MI5 - Drilling Rig

    The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole ...

    By Massenza Drilling Rig Distributor in Brest, FRANCE. from Drilling Rig Product line

  • MITO - Model 100 - Foundation Hydraulic Drilling Rig

    MITO 100 Foundation hydraulic drilling rig, with traversing mechanism, suitable for Civil Engineering, Micro-piles, Anchoring, Jet grouting, Consolidations and other. Maneuverability, Reliability and Productivity make the MITO 100 an highly versatile drilling rig, thanks to new innovative design techniques and the special Fraste articulation ...

    By Fraste S.p.A. Distributor in CURTAFOND, FRANCE.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you