water hammer equipment in Spain

  • TECVAL - Model CP-04 - Back-Seat Needle Valve

    TECVAL CP-04 needle valves are designed to work with liquids under both high pressure and temperature service. Their back-seat allows the free packing change while the valves are in service. They are used to insulate and avoid damaging instruments on the installation, since they do not cause water hammer, thanks to their design.

    By Tecval based in VACARISSES, SPAIN. from Back-Seat Needle Valve Product line

  • TECVAL - Model CP-06 - Back-Seat Needle Valve

    TECVAL CP-06 needle valves are designed to work with liquids under both high pressure and temperature service. Their back-seat allows the free packing change while the valves are in service. They are used to insulate and avoid damaging instruments on the installation, since they do not cause water hammer, thanks to their design.

    By Tecval based in VACARISSES, SPAIN. from Back-Seat Needle Valve Product line

  • Model RN - Nozzle Type Non Slam Check Valve

    The RN type FCA Nozzle Check Valve prevents reverse flow by a slowly sealing before the pump stops. Its short pattern design reduces the closing time avoiding water hammer. The seat can be metal or soft seated and its disc' conical surface design provides a tight sealing. This valve ensures an excellent dynamic performance minimizing vibrations ...

    By Flow Control Applications S.L (FCA) based in Ibarra (Guip├║zcoa), SPAIN. from Nozzle Type Non Slam Check Valve Product line

  • Irua - Axial Flow Check Valve

    Silent check valves designed to prevent reverse flow automatically. The valve shall open when upstream pressure exceeds downstream pressure by 0,2 bar approx. An internal spring shall close the valve just prior to equalizing of pressure on both sides of the plug providing a quiet and non-slamming valve closure. Figure 288 check valve is the ideal ...

    By Irua Tech Industries, S.L. based in GALDAKAO, SPAIN. from Axial Flow Check Valve Product line

  • Irua - Swing Check Valves

    To avoid slam is essential that the counterweight closes the valve before a flow reversal occurs. That Slam is what causes the “Water Hammer” in piping systems. The cushion cylinder cannot retard the valve closure and will minimize the slamming tendency when the valve closes too quickly due to its ...

    By Irua Tech Industries, S.L. based in GALDAKAO, SPAIN. from Swing Check Valves Product line

  • Premium

    Singer Valve - Model 106/206-RPS-L&H - Surge Anticipating Relief Valve

    The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure surges.

    By Singer Valve Inc. Distributor in Tarragona, SPAIN. from Surge Anticipating Relief Valve Product line

  • Premium

    Stevens GroPoint - Model Profile - Multi-Segment Soil Moisture Profiling Probe

    The Stevens GroPoint Profile provides cost-effective measurement of volumetric water content over multiple depths using a single probe, eliminating the cumbersome excavation required for multiple sensors placed at different depths. The sleek, lightweight design installs quickly with minimal soil disruption using a pilot rod and slide hammer tool. ...

  • Model DN 80 - 300 | PN 16 - Saddle Clamps

    Saddle Clamps premium for steel, cast iron and fibre cement pipelines. Suitable for water house service lines. With DIN-DVGW-Type Examination Certificate. Robust and durable design with a 4mm strong, self-cleaning rotary disc,Reliable end stops,Open and close within 1 3/4 rotations for fast action without water hammer,Drilling diameter up to 38 ...

    By ERHARD GmbH & Co. KG - Talis Group Distributor in SPAIN. from Saddle Clamps Product line

  • Dehaco - Model IBEX 3000HS - 30 - 45 ton - Hydraulic Breakers

    The new series of IBEX HS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, solid housing and a modern appearance, is low maintenance and suitable for 30 to 100 ton excavators. These hydraulic hydraulic breakers ...

    By Dehaco B.V. Distributor in Mungia, SPAIN. from Hydraulic Breakers Product line

  • Massenza - Model MI20 - Drilling Rig

    The rig is designed for drilling up to 450 m and is used for water wells, geothermal applications, geotechnics, coring, seismic. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling methods: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI8 - Drilling Rig

    Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Dehaco - Model IBEX 70GS, 0.8 - 1.8 ton - Hydraulic Breakers

    With impact forces from 250 to 12,150 joules, the new series of IBEX GS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, robust housing and a modern appearance, is low maintenance and suitable for 0.8 to 55 ton ...

    By Dehaco B.V. Distributor in Mungia, SPAIN. from Hydraulic Breakers Product line

  • Massenza - Model MI3 - Drilling Rig

    Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI12 - Drilling Rig

    It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. All controls are ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI45 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI50 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI60 - Drilling Rig

    The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI4 - Drilling Rig

    The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI40 - Drilling Rig

    Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

  • Massenza - Model MI28 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is ...

    By Massenza Drilling Rig Distributor in Manresa, SPAIN. from Drilling Rig Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you