water hammer equipment in Switzerland

  • Transient Measurements

    Transient operation is inherent to the operation of hydroelectric power plants and water supply systems, since machines are started, stopped or work at time varying operating conditions. Water hammer and/or mass oscillations may occur. Due to the elasticity of the pipes, the compressibility of the water and of air bubbles, pressures pulsations ...

    By Etaeval GmbH based in Horw, SWITZERLAND. from Transient Measurements Product line

  • Dehaco - Model IBEX 3000HS - 30 - 45 ton - Hydraulic Breakers

    The new series of IBEX HS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, solid housing and a modern appearance, is low maintenance and suitable for 30 to 100 ton excavators. These hydraulic hydraulic breakers ...

    By Dehaco B.V. Distributor in Cordast, SWITZERLAND. from Hydraulic Breakers Product line

  • Massenza - Model MI8 - Drilling Rig

    Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI20 - Drilling Rig

    The rig is designed for drilling up to 450 m and is used for water wells, geothermal applications, geotechnics, coring, seismic. Compactness and solidity are the main characteristics of the rig which is designed to work with several drilling methods: reverse circulation by mud and by air, down the hole hammer drilling, conventional circulation. ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Dehaco - Model IBEX 70GS, 0.8 - 1.8 ton - Hydraulic Breakers

    With impact forces from 250 to 12,150 joules, the new series of IBEX GS-hydraulic breakers from Dehaco are a combination of strength and durability, designed to take on every conceivable demolition job. Every demolition hammer is constructed with a strong, robust housing and a modern appearance, is low maintenance and suitable for 0.8 to 55 ton ...

    By Dehaco B.V. Distributor in Cordast, SWITZERLAND. from Hydraulic Breakers Product line

  • Massenza - Model MI3 - Drilling Rig

    Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI12 - Drilling Rig

    It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. All controls are ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI50 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1100 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI45 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic. It can drill up to 1000 m and it is possible to mount a mud pump or a high capacity compressor depending on the various needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). Its robust ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI4 - Drilling Rig

    The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI60 - Drilling Rig

    The rig is used for various applications, water wells, mineral exploration, deep geothermal applications, coring, seismic. It can drill up to 1500 m and it can be equipped with mud pump or compressor, depending on the customer’s needs. The rig can be mounted on truck or on semi-trailer (in this case it is possible to handle 9 m drill pipes). ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI40 - Drilling Rig

    Drilling rig for water wells, mineral explorations, seismic, coring and deep geothermal applications. Although its moderate dimensions it has high technical characteristics in terms of pull up and torque: for this reason the rig able to reach high depths (around 800 m). It is possible to work by mud pump 7”1/2x8” which vastly improves ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI28 - Drilling Rig

    Drilling rig for water wells, mineral exploration, geothermal applications, coring, seismic, it is the most representative in the Massenza’s production range as although the moderate dimensions it has high technical characteristics in terms of pull-up and torque. For these reasons the rig can reach high depths, around (700m) and it is ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

  • Massenza - Model MI5 - Drilling Rig

    The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole ...

    By Massenza Drilling Rig Distributor in Vezia, SWITZERLAND. from Drilling Rig Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you