Water Hammer Equipment Near Luxembourg
-
Manufactured by Franklin Electric Co., Inc.based in USA
The SR Series submersible turbine pump is designed specifically to meet a variety of applications. With stainless steel impellers and diffusers, a stainless steel shell to maintain alignment, and heavy-investment cast stainless steel suction and discharge brackets, the SR Series submersible turbine pump is equipped to operate efficiently and handle the most demanding ...
-
Manufactured by Franklin Electric Europa GmbHbased in ITALY
Compact, reliable and suited to operate in horizontal position. Built-in check valve to protect the pump against water hammer risk. Floating impellers to grant a better performance and longer life for the pump against abrasion. The hydraulic design is such to enhance the overall effi ciency thus reducing energy consumption and. making the ...
-
Manufactured by Milton Roy - a brand of Ingersoll Randbased in USA
is created by a fluid, usually compressed air (but this can be replaced by pressurised water). The action of this fluid crushes the sleeve in a particular direction, which is determined by careful positioning of the fibre reinforcement, thus totally closing the ...
-
Manufactured by Milton Roy - a brand of Ingersoll Randbased in USA
Series G™ dosing pumps are electric motor-driven pumps with mechanical diaphragm liquid ends. Simple, economical and rugged, they offer great flexibility and a wide selection of liquid ends compatible with most chemicals. With a corrosion-resistant plastic or aluminium housing, depending on the model, they are based on two technologies previously only used for intensive-use industrial ...
-
Manufactured by A. u. K. Müller GmbH & Co. KGbased in GERMANY
2/2-way solenoid valve of nominal diameter DN 7, with integrated dirt strainer, for use with cold and heated potable water and physically and chemically similar media. The valve is servo-controlled and normally closed ...
-
Manufactured by A. u. K. Müller GmbH & Co. KGbased in GERMANY
2/2-way solenoid servo-controlled valve of DN 5 in bistable version, for the control of potable water. The valve is especially suitable for use in electronically controlled, battery driven sanitary ...
-
Manufactured by A. u. K. Müller GmbH & Co. KGbased in GERMANY
2/2-way solenoid valve of nominal diameter DN 5 for use with cold and heated potable water as well as physically and chemically similar media. The valve is servo-controlled and normally closed ...
-
Manufactured by A. u. K. Müller GmbH & Co. KGbased in GERMANY
2/2-way solenoid valve of nominal diameter DN 5 for use with cold and heated potable water as well as physically and chemically similar media. The valve is servo-controlled and normally closed ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Cost-effective wafer flowmeter, available as compact or remote version. The Prowirl D sensor can be installed directly between flanges and thus serves as the functional device for applications in ancillary processes at little installation cost. With genuine loop-powered technology, Prowirl D 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Measuring the quality and quantity of wet steam, saturated steam and superheated steam. Steam has long been an indispensable source of energy in the process industry. Here, 40 percent of fossil fuels alone are used for the generation of steam. With Prowirl F 200, you have the energy and cost efficiency of your steam system well under control. This animation shows why, and explains how Prowirl can ...
-
Manufactured by AVK International A/Sbased in DENMARK
53/30-005 - AVK ball check valves are self-cleaning and with full bore. The ball rotates during operation eliminating the risk of impurities getting stuck on the ball. The full and smooth bore ensures full flow with low pressure loss and eliminates the risk of deposits at the bottom. AVK ball check valves are available with flanges and internal threads. They are delivered with NBR lined ball as ...
-
Manufactured by AVK International A/Sbased in DENMARK
41/36-001 - AVK series 41 swing check valves come with both metal and resilient seats. Installed in pumping applications to prevent back flow they can be used for drinking water as well as waste water. The disc is connected to the shaft via a flexible bush that allows disc and valve seat to adjust exactly. All interior parts are stainless ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
-
Manufactured by Flovac Systemsbased in AUSTRALIA
The Flovac Vacuum Valve has a 50 year design life with no electrical components and requires only minor parts upgrades every ten years. The collection pit houses the 90 mm (3 inch) Flovac vacuum valve which interfaces between the atmosphere coming from the gravity lines and the negative pressure in the vacuum mains created by the vacuum pumps at the VPS. The VPS may be as far as 5 km (3 miles) ...
-
Manufactured by Flovac Systemsbased in AUSTRALIA
The Flovac Vacuum Valve has a 50 year design life with no electrical components and requires only minor parts upgrades every ten years. The collection pit houses the 90 mm (3 inch) Flovac vacuum valve which interfaces between the atmosphere coming from the gravity lines and the negative pressure in the vacuum mains created by the vacuum pumps at the VPS. The VPS may be as far as 5 km (3 miles) ...
-
Manufactured by BEULCO GmbH & Co. KGbased in GERMANY
Acc. to DIN 1988 part 2 holding devices for house water meters, e.g. water meter brackets, have to be installed in new systems and when changing old systems. Competent experts have recognized the practice-proved advantages of our water meter installation sets and are using this perfected technique for ...
-
Manufactured by BEULCO GmbH & Co. KGbased in GERMANY
The generalist for water and gas: The new brass plug-in connector is designed for pipes made of PE and PE-Xa and is suitable for water and gas applications due to the included support pipe and a special NBR o-ring. That is the reason why this product covers more than one field of application. Besides the drinking water installation the ...
-
Manufactured by Ydroteq N.V.based in BELGIUM
A largely self-cleaning filter which stabilizes the output pressure at about 3.8 bar, Ydronet guarantees a constant water pressure with wear-resistant hard ceramic discs. Ydronet cleans the water via a centrifugal filter system. No more increasing pressure in the water system. Ydronet, the device which combines two unique functions in one ...
-
Manufactured by AUMA Riester GmbH & Co. KGbased in GERMANY
AC controls are your perfect solution if the application requires self-adapting control functions, data logging, confi gurable interface or if valve and actuator are to be integrated into a Plant Asset Management System due to advanced diagnostic functions. AC controls are equipped with a parallel interface for free configuration and/or interfaces to fi eldbus systems as used within process ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you