Only show results in Massachusetts? Ok

water jetting equipment

  • Premium

    iCenta - Multi Jet Water Meter

    A range of mechanical, inline, multi jet water meters for pipe sizes 15 to 50 mm and suitable for cold and hot water up to 90 degrees C. These multi jet water meters have WRAS approval and are pulse outputs are fitted as standard.

    By iCenta Controls Ltd based in Salisbury, UNITED KINGDOM. from Flow Meters - Water Meters & Heat Meters Product line

  • Premium

    TDHI - Model TD-550 - Oil in Water Analyzer

    Turner Designs Hydrocarbon Instruments is proud to introduce the new standard in grab sample oil in water analysis with the TD-550 oil in water analyzer. The TD-550 is suitable for crude oils and other heavy oils with a greatly enhanced detection range (low ppb to 5000 ppm) over most oil in water analyzers.  Also new, the TD-560 includes the ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    TDHI - Model TD-560 - Oil in Water Analyzer

    Turner Designs Hydrocarbon Instruments proudly announces the all new dual-channel TD-560 Oil in Water Analyzer. In addition to the optical channel found in the TD-550, suitable for crude and other heavy oils, the TD-560 adds a second channel for detecting lighter hydrocarbons, such as BTEX, gas condensates, gasoline, jet fuel, kerosene, ...

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Elgin - Model ESS-SM-500 - Jet-Shear Mud Mixing Systems

    Using our unique history as a provider of performance chemicals, Elgin has developed a line of drilling fluid jet shear systems.  Jet shear systems are designed to use hydraulic shear to efficiently mix solids with liquids. Elgin’s jet shear systems ensure efficient mixing of soluble polymers and bentonite used in water-based drilling ...

    By Elgin Separation Solutions based in Stafford, TEXAS (USA). from Oil and Gas Products Product line

  • Premium

    Metrohm - Model 2060 MARGA R - A402060120C - Air Monitoring for Research Campaigns

    The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

  • American Aqua Blasters - Tube Water Jetting

    Tube water jetting can remove years of built-up grease, sludge, and other residue and debris inside pipes and drains. Water jetting services are often employed after a video inspection reveals grease or sludge inside piping systems. For water jet cleaning of industrial pipes and drain, water is propelled at various pressures and volumes into the ...

    By American Aqua Blasters, Inc. based in Weeki Wachee, FLORIDA (USA). from Pipe and Tube Cleaning Product line

  • Premium

    Metrohm - Model 2060 MARGA M - A402060110C - Continuous Air Monitoring System

    The Monitor for AeRosols and Gases in Ambient air (MARGA) uses ion chromatography to monitor air quality by measuring the concentration of water-soluble gases and aerosols in air containing different sizes of particulate matter. Air is drawn in to the instrument by a vacuum pump at a constant flow rate. Before entering the instrument, the maximum ...

    By Metrohm AG based in Herisau, SWITZERLAND. from Metrohm Process Analytics Product line

  • Water Jet Blasting

    PressureJet Systems Pvt. Ltd manufactures High Pressure water jet blasting pump. PressureJet Systems Pvt. Ltd offers high pressure, reciprocating triplex plunger pumps, etc. This High Pressure water jet blasting pump is commonly known as water jetting. It offers a widespread abrasive water discharge operation and is very successful because of its ...

    By A1 PressureJet Systems Pvt. Ltd. based in Ahmedabad, INDIA.

  • Water Jet Cleaning

    PressureJet Systems Pvt. Ltd manufactures water jet cleaning. Pressure Jet Systems Pvt. Ltd offers high pressure,reciprocating triplex plunger pumps, etc. This jet cleaning is commonly known as high pressure water blasting. It offers a widespread abrasive water discharge operation and is very successful because of its powerful blasting effect. In ...

    By A1 PressureJet Systems Pvt. Ltd. based in Ahmedabad, INDIA.

  • American Aqua Blasters - Water Jetting Pipes

    American Aqua Blasters, Inc. offers water jet technology with many of our high pressure cleaning services for industrial pipes and sewer drain lines. High pressure water jetting is an industrial pipe cleaning method effective for removing grease, sludge and other deposits that have built up over time around the inside of pipes and sewer lines. ...

    By American Aqua Blasters, Inc. based in Weeki Wachee, FLORIDA (USA). from Pipe and Tube Cleaning Product line

  • Schutte & Koerting - Water Jet Eductor

    Principle of Operation; Fig. 264, Fig. 266 and Fig. 265 Water Jet Eductors are designed for liquid pumping and mixing operations and for the handling of some solids. In operation, pressure liquid enters the eductor through the pressure nozzle and produces a high velocity jet. This jet action creates a vacuum in the line which causes the suction ...

    By Schutte & Koerting based in Trevose, PENNSYLVANIA (USA). from Eductors & Syphons Product line

  • Model JM-1450 - Electric Water Jet

    The powerful JM-1450 electric water jet gives you as much pressure as you can get from an electric jet. It generates 1500 psi at 1.7 gallons per minute, yet only pulls 13 amps. It’s powered by a 1-1/2 hp dual capacitor enclosed motor with an in-line ground fault circuit interrupter.

    By General Pipe Cleaners, division of General Wire Spring Company based in McKees Rocks, PENNSYLVANIA (USA). from water Jets-Set Product line

  • KJ-3100 - Water Jetting Machines

    2' to 10' (50 to 250 mm) Drain Lines. The RIDGID® Model KJ-3100 portable water jetter gives you 3000 psi (205 bar) actual working pressure to handle large commercial and industrial applications. This jetter propels a highly flexible and lightweight hose through 2' to 10' (50 to 250 mm) lines blasting through sludge, soap, grease, and sediment ...

    By Ridge Tool Company based in Elyria, OHIO (USA). from Drain Cleaning- Water Jetting Machines Product line

  • Bell - Water Jet Pumps

    Bell Dredging Pumps offers a range of water jet pumps specially designed to supply our sand production heads and flat barge heads with water under high pressure. We are a true specialist in delivering high level workmanship in all our products and great after sales service & support to our customers.

    By Bell Dredging Pumps based in 1731 LR, NETHERLANDS. from Other Products Product line

  • Model HPS400 DC - Water Jetting Unit

    HPS400, 30 kW (40 hp) diesel engine driven, semi-enclosed, crashframe mounted, High Pressure water jetting unit, suitable for the mos demanding applications. Simple to operate & maintain, this is probably the most user friendly HP unit on the market. Suitable for single or twin gun. footvalve operation. Applications include surface cleaning / ...

    By Hughes Pumps Ltd based in Washington, UNITED KINGDOM. from Diesel Drive Product line

  • Model HPS400 EC - Water Jetting Unit

    HPS400, 30kW (40 hp) electric motor driven, crashframe mounted High Pressure water jetting unit, suitable for the most demanding applications. Simple to operate & maintain, this is probably the most user friendly HP unit on the market. Suitable for single or twin gun / foot valve. operation. Applications include surface cleaning / de-scaling, ...

    By Hughes Pumps Ltd based in Washington, UNITED KINGDOM. from Electric Drive Product line

  • Model CD50 Series - Water Jetting Machines

    The CD50 range of water-blasters and water-jetting machines goes from 230 to 2500 Bar with pump flows from 7 to 74 L/min. The pump are driven by a 4 cylinder water cooled Toyota diesel engine and the all enclosing frame is made in hot dip galvanized steel for durability and corrosion resistance and is primed and painted for a nice appearance. The ...

    By DEN-JET Nordic A/S based in Astrup, DENMARK. from Diesel Water Blasters Product line

  • Offshore Water Jetting

    Calder offshore specification MultiJet units are designed and certified to undertake high and ultra high pressure waterjetting applications in Zone 1 and Zone 2 hazardous area locations around the world. Constructed to allow operation on drill rig, production platform or FPSO, the MultiJet can be safely used for superstructure and fabric ...

    By Calder Ltd (UK) based in Worcester, UNITED KINGDOM. from Offshore & Industrial Water Jetting Product line

  • Model HP5650 DC - Water Jetting Unit

    HPS650, 48 kW (65 hp) diesel engine driven, semi-enclosed, crashframe mounted, High Pressure water jetting unit, suitable for the most demanding applications. Simple to operate & maintain, this is probably the most user friendly HP unit on the market. Suitable for single or twin gun / footvalve operation. Applications include surface cleaning ...

    By Hughes Pumps Ltd based in Washington, UNITED KINGDOM. from Diesel Drive Product line

  • Water Jet Nozzles

    Our water Jet Nozzles, designed for firefighting, are normally supplied as a two part item which includes a branch pipe fitted with a separate nozzle tip. Nozzle outlet sizes can be supplied 9mm, 13mm, 16mm, 19mm and 25mm.

    By Fire and Water Supplies Limited based in Preston, UNITED KINGDOM. from Fire Products - Nozzles Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you