Water Level Control Equipment Near Ireland
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT weirs are available in various forms and are mainly used in surface and process water systems. The KKS-PE tilting weir provides a very accurate means of controlling water levels upstream, and is a very cost-effective solution for smaller applications. Using a plastic tilting weir is often a cost-effective solution. The side ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
A tilting weir is intended to maintain waterlevels on the height water side. With a rotating motion, it is possible to adjust the position of the weir, the excess water will flow over the ...
-
PremiumManufactured by Kingspan Klargesterbased in IRELAND
A reed bed is a natural filtration process used in conjunction with a BioDisc Sewage Treatment Plant to further enhance the quality of effluent migrating into a drainage field or surrounding watercourse. They are easy to install, simple to run, and environmentally ...
-
Manufactured by Harwil Corp.based in USA
Featuring continuously adjustable float buoyancy control to allow use in fluids with specific gravity down to 0.6. Continuous buoyancy control allows switch activation at oil/water interface. May be used in hazardous areas when used with intrinsically safe relays. Consult factory for other dual-component fluid interface systems. ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
A low energy wet scrubber is a simple versatile air pollution control device that controls gaseous emissions through contact between the exhaust gases and injected water. Within the scrubber hot flue gases are rapidly cooled by atomised water in-jected at pressure through one or more spray nozzles. Dust particles (particulates) ...
-
Manufactured by Dynamax Incbased in USA
For field applications, or where portability is essential, the WET Sensor Kit can be an essential tool for measuring soil water content, EC, and soil temperature. The WET2-K1 WET Sensor Kit comes complete with the WET sensor, a cable, HH2 Readout with data memory, and a handy carry case. A calibration set for a wide variety of soil types is ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
with an internal 1.1 litres tank with electronic level control and an automatic fill function “Autorefill” from an external ...
-
Manufactured by Harwil Corp.based in USA
The L-21 is a low cost, high performance level switch made from highly durable plastics. It features a variable liquid level differential and a single point pump up/pump down level ...
-
Manufactured by T-T Pumps Ltd.based in UNITED KINGDOM
the rise and fall in water level and controls the pump automatically. Body and strainer produced in technopolymer with stainless steel shaft, fitted with a lipseal and mechanical ...
-
Manufactured by Diversitechbased in CANADA
The MONSOON™ Wet Downdraft Table is the most cost-effective, high performance and compact wet dust collection solution on the market. Diversitech’s self-contained design allows operators to fill up the dust collection table with water, saving costs versus a typical wet dust collector and ducted table configuration. The wet ...
-
Manufactured by Diversitechbased in CANADA
The Typhoon stainless steel central wet dust collector provides powerful performance and high-efficiency filtration capability to handle demanding wet dust collection applications. The collector’s design allows for minimal maintenance requirements and can be configured in a compact configuration or with a dust collection ...
-
Manufactured by Diversitechbased in CANADA
The Typhoon WX-3000 stainless steel wet dust collector excels at capturing combustible/hazardous dust from your plant air. The 5HP blower draws air through DiversiTech’s proprietary water-tree baffle design, creating a cascading water effect that removes particles as small as 3 micron from the ...
-
Manufactured by Diversitechbased in CANADA
Diversitech’s MONSOON Wet Downdraft Table provides a safe and secure solution for the capture and collection of hazardous combustible dust. The simple to use, plug & play design allows for a quick and easy installation of the downdraft table. The integrated blower in the wet downdraft table provides an industry leading capture velocity to remove dust further away from the table surface ...
-
Manufactured by Diversitechbased in CANADA
The MONSOON Wet Downdraft Table provides an all-in-one solution for the capture of combustible metal dusts including aluminum, titanium and magnesium. The downdraft table’s stainless steel construction prevents the machine from experiencing rust and corrosion and making maintenance and cleanout quick and ...
-
Manufactured by Diversitechbased in CANADA
The MONSOON™ Wet Downdraft Table product series delivers the safe capture of hazardous/combustible dusts with the smallest equipment footprint in the industry. This self-contained wet downdraft table's patent-pending design achieves a very high face-velocity at a very affordable price. A wide range of application kits and custom fittings can help you meet your NFPA and OSHA ...
-
Manufactured by Diversitechbased in CANADA
This Wet Dust Collection Booth offers a simple, customizable and turnkey solution to handle combustible dust collection for larger work pieces. The stainless steel Wet Dust Collectors serve as the booth’s filtration hub, and range in size from 3000CFM, 5000CFM, and 6500CFM units. A standard auto-level water control system works to ...
-
Manufactured by Diversitechbased in CANADA
The Typhoon WX-1200 wet dust collector eliminates combustible dust fires and flammable sparks from your process by using cascading water to quench dangerous airborne particulate. In order to prevent excess humidity, the wet collector includes a mist eliminator after-filter to reduce the amount of water spray exhausted. The wet dust ...
-
Manufactured by SCITEQ A/Sbased in DENMARK
The compact design of the SIGMA thermo tank reduces footprint to a minimum while at the same time minimizing the energy consumption, which makes the thermo tank ideal for small laboratory ...
-
Manufactured by Steinhardt GmbH Wassertechnikbased in GERMANY
According to ATV A128 [Wastewater Technology Association], rainwater overflow basins and retaining canals are to be furnished with spillway dams. In the event of strong rainfall they divert excess water into the surrounding bodies of water. The upper edge of the spillway dam is the maximum storage level with which the chargeable storage ...
-
Manufactured by SPX Cooling Technologies, Inc. - a division of SPX Corporationbased in USA
The Recold JC is a low noise, forced draft, centrifugal fan design with a weight saving, corrosion free copper coil all in a low height configuration. This Evaporative Condenser is a ruggedly built unit constructed to provide many years of durable, dependable service with minimal maintenance requirements. Its low profile design simplifies integration into architectural designs and can be placed ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you