We couldn't find any water loss prevention equipment suppliers or service providers located in Yemen

Here is a list of equipment results with suppliers serving Yemen

water loss prevention equipment available in Yemen

  • Premium

    Specac - Oil in Water Analysis Kit

    Specac’s Oil in Water Analysis Kit contains all the necessary FTIR instrument accessories to implement ASTM test method D7066-04 for the analysis of total recoverable oil, grease, or petroleum hydrocarbons in water. The kit comprises of three matched pairs of infrared grade quartz cells supplied in 10, 50, and 100 mm pathlengths and a 3' x ...

    By Specac Limited based in Orpington, UNITED KINGDOM. from Oil in Water Analysis Kit Product line

  • Premium

    WesTech MULTIWASH® - Filtration Process

    MULTIWASH® Filtration Process combines air and water simultaneously for the duration of the backwash. The combined air and water wash provides a vigorous scouring action to clean the media while specially designed wash trough baffles are used to eliminate media loss. The superior cleaning performance of the MULTIWASH process prevents both chemical ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Filtration Process Product line

  • Premium

    Sauereisen - Model No. 4 - Flotemp Cement

    Sauereisen Flotemp Cement No. 4 is used for potting applications where high electrical insulation and thermal conductivity are required. No. 4 is specially formulated to limit the wicking nature of a porous substrate. This will prevent permeation of water into the substrate and the associated volume loss or cavitation of the cement. The need for ...

    By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA). from Flotemp Cement Product line

  • Premium

    ENEXIO 2H - Air Inlet Louvres For Cooling Towers

    Our cellular inlet louvres improve the air flow into the cooling tower. They not only hold back unwanted elements (e.g. leaves) but also prevent water splash-out which can cause icing and loss of expensive water and treatment chemicals. Moreover, an inlet louvre restricts the amount of sunlight entering the cooling tower thereby impeding algae ...

    By ENEXIO Water Technologies GmbH based in Hürth, GERMANY. from Air Inlet Louvres For Cooling Towers Product line

  • Premium

    Ekman - Model 04.34 - Grab Set

    This grab is intended for use in soft sediment that is free from plant growth. Two thin hinging flaps are open while the grab is lowered. The flaps close when a drop-weight is dropped (cable operated) or a button is pressed (rod operated). Samples can, therefore, also be taken from very soft top layers. The pressure of the sample prevents much ...

    By Eijkelkamp Soil & Water based in Giesbeek, NETHERLANDS. from Grab Set Product line

  • DRILL-X - Model HP - Thinning Drilling Detergent and Wetting Agent

    New and Improved, High Performance DRILL-X HP is a thinning drilling detergent and wetting agent for use in fresh water drilling fluid systems where clays are present. New and Improved, High Performance DRILL-X HP can be added to fluids to keep bits and tooling clean while improving fluid loss control and adding lubrication properties to the ...

    By Wyo-Ben, Inc. based in Billings, MONTANA (USA). from Thinning Drilling Detergent and Wetting Agent Product line

  • RO Membrane Cleaning Chemical

    Membrane Cleaning Even with all the preventative care given to a reverse osmosis system, some fouling of the membranes will take place. Cleaning of the membranes can improve membrane performance. All membranes lose their performance with time. One of the major causes for the loss of performance is due to substances that deposit on the membrane ...

    By R.O.Tack water technology based in Karachi, PAKISTAN.

  • Evaporation Mitigation Covers

    Evaporative water loss is a growing environmental problem throughout the world. IEC covers provide an effective solution to mitigate this problem by shielding the water surface from wind and sunlight. Unlike floating ball and hexagon shaped covers, IEC covers do not have hundreds or thousands of seams or interstitial spaces that rotate and move. ...

    By Industrial & Environmental Concepts, Inc. (IEC) based in Lakeville, MINNESOTA (USA). from Evaporation Mitigation Covers Product line

  • TAM - Plug & Retainer Kit

    The Plug & Retainer Kit is a one-trip system that includes a hydraulic and mechanical release system. It can be used with all TAM Casing Annulus Packers. The assembly is run into open hole in vertical or horizontal applications for shutting off water from the toe of the well or providing a kickoff point in directional wells. The system also ...

    By TAM International, Inc. based in Houston, TEXAS (USA). from Plug & Retainer Kit Product line

  • Model SUB-K - Separators For Submersible Pumps

    Prevents sand damage to submersible water well pumps under 100 gpm. Such damage would typically lead to loss of pump efficiency and ultimate pump failure. Dramatically extends pump life and saves energy by keeping pump running most efficiently.

  • Benchmark - Model C - LB14 - Laboratory Centrifuge

    L-K Industries designed the Benchmark C as the first state-of-the-art oil centrifuge with Class I, Division 2 certification. It is ideal for laboratory settings or refineries using 100-mL capacity tube configurations. It is usually installed on benchtops for testing crude oil or refined petroleum products. The fully insulated centrifuge prevents ...

    By L-K Industries based in Houston, TEXAS (USA). from Laboratory Centrifuge Product line

  • Galvanised Tritainer

    For small to medium capacities of water storage, where space is at a premium, the Tritainer / Firetainer tank offers a cost effective solution. Using triangular shaped galvanised steel panels which make up 1.0m2 modules that are then bolted together on site, a rapidly assembled rectangular tank that can fit into small and difficult spaces can be ...

    By Franklin Hodge Industries Ltd based in Herefordshire, UNITED KINGDOM. from Galvanised Tritainer Product line

  • PROTEGO - Model DE/S-IIB - High Velocity Pressure Relief Valve

    The deflagration- and endurance burning-proof PROTEGO DE/S type device is a state of the art high velocity vent valve working on the principle of a dynamic flame arrester. It is primarily used as a safety device for flame transmission proof venting of cargo spaces and loading systems for in land water way barges during the loading process and on ...

    By Braunschweiger Flammenfilter GmbH based in Braunschweig, GERMANY. from High Velocity Pressure Relief Valve Product line

  • Air Pressure Gauges

    Air pressure gauges in a variety of pressure ranges available for use with GW accelerators, zone control and residential risers. Water pressure gauges (0 - 16bar) for use with GW sprinkler and deluge valves in black-finished steel. Glycerine-filled stainless steel model also available. Supplied with No Loss Connectors to prevent system ...

    By GW Sprinkler A/S based in Glamsbjerg, DENMARK. from Air Pressure Gauges Product line

  • Typhoon - Foot Valves

    TYPHOON Foot Valves are valves that are mounted on the suction line of the suction pumps and prevent the return of the water in the system, as a result of the combination of the filter and the clapper. Thanks to the glob design, the pressure loss goes down to a minimum and the water continues to flow without deterioration. The filter in the valve ...

    By Tayfur Water Systems based in Işıkkent-Bornova, TURKEY. from Foot Valves Product line

  • Reverse Osmosis Treatment

    Wex offers membrane Antiscalants for a wide range of diverse scalants. Our Genesys brand of scale inhibitors saves you downtime and commercial losses. Highly effective antiscalant across a broad spectrum of water types. Minimises scaling and reduces the frequency of membrane cleaning. Reduces and in many cases eliminates the need for acid ...

    By Wex Technologies Pvt. Ltd. based in Kothrud, INDIA.

  • UNIVERSAL CORE HEAD

    Simple, versatile, and easy to use. Thin-wall core barrels and positive check valveassembly collects quality samples in a variety of sediments and conditions. An excellent quality brass check valve provides good flushing and positive vacuum to retain cores during recovery, without core catchers. Upon retrieval, one must plug the bottom of the core ...

    By Aquatic Research Instruments based in Hope, IDAHO (USA).

  • I-CHEM Storm Water Sampler

    The I-CHEM collects a full one-liter sample of first flush storm water within the first 30 minutes of a rain event in compliance with EPA sampling requirements. A floating ball valve seals off the sample collection port to prevent co-mingling with run-off water as well as volatile analyte loss. Water flows through the samplerÕs collection funnel ...

    By Forestry Suppliers, Inc. based in Jackson, MISSISSIPPI (USA).

  • Jacarta interSeptor - Environmental Monitoring System

    The Jacarta interSeptor can protect data centres, server rooms and racks by preventing computer equipment damage and data loss due to over-heating, excess moisture, water ingress, fire, power failures, security breaches, and many other potentially catastrophic environmental threats.

    By Jacarta Ltd based in Wiltshire, UNITED KINGDOM.

  • Ford - Check Valves, Retrosetters and Cut-In Check Valves

    Ford is THE choice of Check Valves for Water Utilities. Ford Meter Box offers these important advantages: 1) The only full line of ASSE approved Dual Checks designed for use at the Water Meter, 2) ASSE approved Dual Checks available as integral parts of Ford Coppersetters, Resetters, Iron Yoke Settings and Yokeboxes. See Catalog Sections C, E, F ...

    By The Ford Meter Box Company,Inc. based in Wabash, INDIANA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you