Water Mixing Equipment Near Switzerland
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
10.94 Bentonite plugs, supplied in packs. 10.95 Bentonite plugs in pallet packages. Bentonite plugs are used for sealing bores to prevent water mixing from different aquifers, after ...
-
Manufactured by Komptech GmbHbased in AUSTRIA
In this process, various types of organic waste are prepared for liquid fermentation (dry matter less than 12%m). They can include packaging and contamination. Preshredding, using a Terminator and screen drum or Crambo, prepares the material for subsequent dissolution and contrary separation. The latter is done in 3 steps. Step 1 is pulping, step 2 is a combination of Multistar wet screening with ...
-
Manufactured by HORIBA Europe GmbHbased in GERMANY
Everything from precise measurement to reduced running costs. HORIBA-leading the world in practical environmental analysis technology will give a benefit for Total Nitrogen/Phosphorus monitoring. Total nitrogen, total phosphorus. To measure these two new targets in the 5th of Total Water Contaminants Regulation enforced in Dec. 2001 in ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction volume 100 – 400 l/h against 4.5 bar The polymer preparation system DULCODOS ULIa is an inline system and processes liquid polymers to produce a fully activated solution. It is ideally equipped for your application with integrated mixing and maturing chamber and novel peristaltic metering ...
-
Manufactured by Bollegraaf Recycling Solutionsbased in NETHERLANDS
Uniquely effective dust suppression for multiple applications. Reduce hazards and increase productivity simultaneously. Most dust suppression systems use only water, which makes the material too wet for proper separation and causes water damage to the equipment. BeeFoam uses a minimal amount of water mixed with air to create a ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Extraction rates of up to 2,000 l/h. The ProMinent metering system Ultromat ULDa is an automatic polyelectrolyte preparation system. It is useful wherever polymers need to be automatically prepared as polymer solutions to act as flocculation ...
-
Manufactured by Ensola Water Technology Agbased in SWITZERLAND
No blockages, easy handling. Dosage: up to 30 liters of polymer commodity / day. Speed: 1,500 rpm. Mixing volume: 20 liters ...
-
Manufactured by ELEX AGbased in SWITZERLAND
In the case of certain gas-cleaning processes, particularly in the cement industry, it may be necessary to cool down the gases prior to the cleaning process or to condition the gases to the most favourable physical state. The operating principle of an evaporative cooling tower system is simple. By injecting water in very fine droplet sizes ...
-
Manufactured by Bucher Municipal AGbased in SWITZERLAND
Mix the solution on demand and directly on the vehicle. The slaked lime sprayer MIXSPRAY MS10 has been designed to mix and spray on demand the calcium hydroxide during asphalt laying operations. The slaked lime is increasingly being used in asphalt laying on tack coat to avoid the tack coat-tire adhesion thanks to its anti-adhesive ...
-
Manufactured by Sulzer Ltd.based in SWITZERLAND
The complete answer to Low-Speed, highly energy efficient submersible mixing in a wide range of applications in industry and municipal treatment ...
-
Distributed by MediaCarb Saglbased in SWITZERLAND
Supply of a wide range of ion exchange resins for water softening, demineralization and special ...
-
Manufactured by Georg Fischer Piping Systems Ltdbased in SWITZERLAND
The Signet Rear Enclosure Kit allows the 9900 Transmitter to be mounted just about anywhere. The design features make it suitable for installations onto walls, pipes, struts or inside panels. There are two kits available, Rear Enclosure with Hinged cover or with Flat cover. Kits can be installed on any generation of the 3-9900-1P Panel Mount Transmitter. They can also be sed with the 3-9900-1BC ...
-
Manufactured by Cla-Valbased in USA
Cla-Val Models 136-01 and 636-01 Solenoid Control Valves are on-off control valves that either open or close upon receiving an electrical signal to the solenoid pilot control. These valves consist of a Hytrol main valve and a three-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open ...
-
Manufactured by LU-VE Groupbased in ITALY
Applications: Process cooling, air-conditioning and commercial cooling. Cooling capacity: 35-1044 kW. Fans: Maintenance free EC-fans. Coil: Turbofin 5 aluminium fins 0, 15 mm, copper tubes diameter 12 or 16 mm, fin spacing 2,1 mm. Casing: Powder painted galvanized steel, corrosion class C4. Cooling media: Water/glycol mixes and others. ...
-
Manufactured by Tedom Schnell GmbHbased in GERMANY
SCHNELL CHP units. Ready-mixed SCHNELL PROTECT COOLANT is also an ideal choice for our engines. Prepared to TEDOM SCHNELL’s exacting requirements, this ready-mixed coolant saves you time, hassle and expense and keeps your CHP unit fully protected at all ...
-
Manufactured by Vuototecnica S.r.l.based in ITALY
from being clogged and allows the vacuum generator to suck oil or water condensation saturated fluids mixed with fine and impalpable dust. They can be used as PVP 7X and, in addition, they can also operate in humid or dusty environments. They are available with capacities of 7, 14 e 18 ...
-
Manufactured by Carrier Vibrating Equipment, Inc. / Carrier Europe S.C.Abased in BELGIUM
Carrier vibrating fluid bed sand coolers are designed to cool hot return sand to temperature and moisture levels ideal for ...
-
Manufactured by Hoses Technology S.P.A.based in ITALY
Softwall rubber hose suitable for conveying hot water mixed with cooling liquids. Standards: DIN 73411. TEMPERATURE RANGE: -40˚C ...
-
Manufactured by Tecniplant S.p.A.based in ITALY
The Static Mixers are in-line mixing devices which consist of mixing elements inserted in a length of pipe. The energy for mixing is derived from the pressure loss incurred as the process fluids flow through the mixing element and additional pumping energy is necessary over and above that normally needed for pumping requirements. ...
-
Manufactured by E E Elektronik Ges.m.b.Hbased in AUSTRIA
The EE210 is the ideal transmitter for high accuracy measurement of relative humidity and temperature in demanding climate control applications. With encapsulated measurement electronics inside the sensing probe and E+E proprietary coating protection of the humidity sensor, EE210 can be employed even in harsh and aggressive ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you