water mixing system equipment in Massachusetts

  • Aquapoint - Model AquaCELL & AquaFAS - Wastewater Treatment Systems

    Aquapoint’s AquaCELL (MBBR) and AquaFAS (IFAS) technologies are fixed film biological wastewater treatment processes in which thousands of submerged polyethylene (HDPE) biofilm carriers operate in motion within an aerated or mixed basin. Each carrier element incorporates multiple cells of protected surface area to sustain a dense community ...

    By Aquapoint based in New Bedford, MASSACHUSETTS (USA).

  • Model 3M - Fire Barrier Mortar

    A cost-effective lightweight, cementitious firestop with variable mix ratios for use in through penetration applications. Up to 3-hour fire protection in tested and listed systems. Off-white with dark flecks, ready for mixing with potable water. Firestop tested up to 3 hours in accordance with ASTM E 814 (UL 1479) & CAN/ULC S115 UL-listed ...

    By International Fire & Safety Corp (IFAS) based in Bellingham, MASSACHUSETTS (USA). from Fire Barrier Mortar Product line

  • Model TMS - Potable Water Mixing Systems

    Mixing Systems for Potable Water Storage Tanks. Improved Water Quality by Complete Mixing. The Tideflex Mixing System (TMS) has been installed in over 2,000 tanks and reservoirs as small as 2,000 gallons to over 20 million gallons and has been proven to improve storage tank water quality. The TMS has been installed and proven effective in every ...

  • MixMaster Series Tanks

    Chemical disinfection using chlorine is generally considered the method of choice because it is reliable and practical. The MIXMASTER baffle tank is one of the most effective High Mixing Disinfection Systems currently available, it ensures uniform mixing, and sufficient residence time to meet the CT (contact time) standard set by most health ...

    By Global Water Solutions Ltd. - member of The Swan Group Office in Randolph, MASSACHUSETTS (USA). from MixMaster Series Tanks Product line

  • Turborator - Autothermal Thermophilic Aerobic Digestion (ATAD)

    Turborator technology has been providing aeration and mixing solutions to the wastewater industry since 1989 and is a featured component in the first ATAD system in North America, The District of Salmon Arm Water Pollution Control Centre, Salmon Arm, BC which continues to operate today.  Please refer to the document to the right for a ...

    By MGD Process Technology Inc. (MGD) based in Boylston, MASSACHUSETTS (USA).

  • Premium

    HILCO - Portable Filters System

    HILCO portable filters are an economical solution for removing water and particulate from oils, fuel and other fluids. Filters can be built to ASME Code standards. Hilco portable filters can be used for many different fluids, including: Mineral-based lubricating, hydraulic, and insulating oils Synthetic lubricating and hydraulic (EHC) fluids Fuel ...

    By Hilliard Corporation Distributor in Wrentham, MASSACHUSETTS (USA). from Portable Filters System Product line

  • McPherson - Model 629 - Windowless Hollow Cathode Source

    The Model 629 Hollow Cathode is a CW gas discharge source used to ionize molecular or rare gases. It operates with no window and is a rich source of ion lines at wavelengths longer than 25 nm (less than 50 eV). Output line emission depends on the gases used. It is possible to mix or switch gases during operation. It is electrically quiet and ...

    By McPherson based in Chelmsford, MASSACHUSETTS (USA). from Windowless Hollow Cathode Source Product line

  • Model iSBR - Mixing and Aeration System

    As a result of the exceptional suitability of the HYPERCLASSIC- Mixing and Aeration System for Sequencing Batch Reactor plants, we have more than 15 years of experience and considerable knowhow in this fjeld. For this reason, we offer SBR plants as an INVENT system solution. In this case, we also supply a special clean-water decanting system and a ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in MASSACHUSETTS (USA). from Mixing and Aeration System Product line

  • AquaBlend - Water Storage Tank Mixing System

    The AquaBlend system provides mixing for water storage and flocculation tanks by firing short bursts of compressed gas through NSF-compliant piping and engineered nozzles. The AquaBlend controller air injection valve intermittently fires to blend from the tank bottom to the water surface creating homogenous conditions, or fired in such a manner as ...

    By EnviroMix Distributor in Berlin, MASSACHUSETTS (USA). from Water Storage Tank Mixing System Product line

  • Hyperdive - Mixing and Aeration System

    The INVENT HYPERDIVE®- Mixing and Aeration System was developed and optimized especially for demanding applications in municipal and industrial wastewater treatment plants. It provides efficient oxygen transfer and optimal mixing during the biological stage. In addition to the task of introducing oxygen, it also fulfils the important function ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in MASSACHUSETTS (USA). from Mixing and Aeration System Product line

  • AquaBlend - Model FT - No - Shear Flocculation Tank Mixing System

    The EnviroMixAquaBlend-FT system provides mixing in water treatment flocculation tanks by firing programmed short bursts of compressed air through engineered patented nozzles. AquaBlend-FT controller air injection valves fire large (e.g., 4'0) gas volumes through a distributed nozzle array located across the tank floor. Compressed air is ...

    By EnviroMix Distributor in Berlin, MASSACHUSETTS (USA). from No - Shear Flocculation Tank Mixing System Product line

  • iDEC - Model SBR - Decanting System

    The development of the iDEC-SBR Decanting System was based on the well known features a decanting system which collects and discharges purified wastewater out of SB-reactors is expected to show. Before the INVENT-decanters were created, different types of effluent discharge constructions were used in the market with mixed results. This was the ...

    By INVENT Umwelt-und Verfahrenstechnik AG Distributor in MASSACHUSETTS (USA). from Decanting System Product line

  • Poly-Mate Polymer Injection Systems

    Poly-MateĀ® Polymer Injection Systems can be used for either liquid or dry polymer mixing and injection. The Poly-MateĀ® Models 250 through 2000 are designed to be used with liquid polymer, which is manually added to the batch tank. An electric agitator is used for dispersing and blending the neat polymer with water. The dilute solution is then ...

    By Flo Trend - a Wassar Logistics Holdings, LLC Distributor in MASSACHUSETTS (USA). from Poly-Mate Polymer Injection Systems Product line

  • Cool-Gard II - Model Pre-Mix - Heavy Duty Engine Coolant

    Service life of 6 years / 6,000 hours, Fully formulated for heavy-duty cooling systems, Reduces downtime and lowers operating costs, Protects against corrosion and cavitation, Thermally stable, Pre-mixed with premium quality water, Contains bittering agent, Recommended for heavy- and light-duty diesel, natural gas, and gasoline engines, Pre-mixed ...

    By John Deere Distributor in Pittsfield, MASSACHUSETTS (USA). from Heavy Duty Engine Coolant Product line

  • Model 500 ltr. - 4000 ltr. - Sludge Oil Tanks

    Atlas Incinerators recommend a 1-tank system since it is much simpler to operate one tank automatically than two tanks manually. By not using a settling tank the crew will save time, not needing to settle water out. Sludge oil mixing tanks are delivered with a circulation pump and a mill pump for agitation and comminution of the tank contents. ...

    By Atlas Incinerators A/S Distributor in Salem, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you