Water Mixing System Equipment Near Vermont
-
Manufactured by EnviroMixbased in USA
The AquaBlend system provides mixing for water storage and flocculation tanks by firing short bursts of compressed gas through NSF-compliant piping and engineered nozzles. The AquaBlend controller air injection valve intermittently fires to blend from the tank bottom to the water surface creating homogenous conditions, or fired ...
-
Manufactured by Tideflex Technologies - a Division of Red Valve Company, Inc.based in USA
Mixing Systems for Potable Water Storage Tanks. Improved Water Quality by Complete Mixing. The Tideflex Mixing System (TMS) has been installed in over 2,000 tanks and reservoirs as small as 2,000 gallons to over 20 million gallons and has been proven to improve storage tank ...
-
PremiumManufactured by Sauereisen Inc.based in USA
or bases. No. 440 is specifically formulatedfor vertical and overhead applications over concrete and steel. The FibreLine system utilizes Sauereisen VEPrime No. 550 or Hi-Temp Primer No. 560 as bond enhancing primers depending on the service temperature of the environment. For applications that require a smoother surface texture, a topcoat of ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Acid-Alk Cement 33 – Mortar Grade is the original one-part, chemical-setting, inorganic, modified silicate base cement. Supplied in powder form, 33 – Mortar Grade is mixed with potable ...
-
PremiumManufactured by Sauereisen Inc.based in USA
construction and maintenance applications. The 54 SG - Structural Grade material has been specifically formulated to resemble the physical characteristics of Portland cement and should be installed with proper reinforcement, mixing, forming and casting methods. After its cure, 54 SG provides outstanding performance as a chemical resistant liner for the ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data is subject to reasonable deviation. Data should not be used for specification ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy NovolaK Polymer Concrete 265 is a castable for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 265 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen NovolaK Vinyl Ester Polymer Concrete No. 465 is a castable for the construction of chemical-resistant sumps, dikes, containment areas, trenches, walls, and structural support columns or bases. No. 465 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen NovolaK VEGlaze 472 is a coating used for the chemical-resistant construction of sumps, ducts, containment areas, trenches, walls, and other support columns or bases. VEGlaze may be used as a thin barrier of corrosion resistance or as a topcoat for other Sauereisen vinyl ester linings and polymer concretes. The VEGlaze system ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Epoxy Polymer Concrete - 165 is a castable material for the chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, floors, and structural support columns or bases. 165 has been specifically formulated for foundation construction and should be installed with proper reinforcement. Mixing and forming ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen Vinyl Ester Polymer Concrete No. 410 is a vinyl ester castable for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls and other structural support columns or bases. No. 410 has been specifically formulated for independent foundation construction and should be installed with proper reinforcement. ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak Glaze Series is a coating system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper mills. ...
-
PremiumManufactured by Sauereisen Inc.based in USA
RestoKrete Hi-Build Filler Compound - No. 209HB is an epoxy material specifically designed to refinish large surfaces and open joints within concrete. No. 209HB provides a smooth finish and appropriate bonding surface for epoxy topcoats. RestoKrete Hi-Build Filler Compound is formulated to minimize sagging which permits thick application of the product where necessary. Do not use with vinyl ester ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak™ Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak™ has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and ...
-
PremiumManufactured by Sauereisen Inc.based in USA
The Sauereisen Fast-Trak Lining Series is a fiber-reinforced lining system specifically designed to protect concrete, steel or masonry surfaces in the pulp & paper industry. Fast-Trak has the chemical resistance to withstand the bleaches, liquors and other corrosive substances that attack unprotected trenches, sumps and chests in paper ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen RestoKrete® Underlayment F-120 is a fast-setting, high early strength, Portland/calcium-aluminate based resurfacing material available in three formulations - Trowelable, Castable or Gunite. Selection of material is dependent upon concrete condition and whether application is on vertical, horizontal or overhead ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen RestoKrete Filler - Compound No. 209 is an epoxy formulation specifically designed to fill voids, irregularities, and air pockets in concrete and steel. The filler compound provides a smooth surface for the application of epoxy monolithics. No. 209 is not compatible with vinyl ester topcoats. The No. 209FS is a faster setting ...
-
PremiumManufactured by Sauereisen Inc.based in USA
Sauereisen VEMatte Reinforced System No. 470 is a multiple layer, 120-mil, fiberglass reinforced lining for chemical-resistant construction of sumps, dikes, containment areas, trenches, walls, and floors. This series of novolak vinyl ester linings offers superior resistance to mostinorganic acids, caustics, oxidizing solutions, ...
-
Manufactured by Spartan Environmental Technologies, L.L.C.based in USA
Removing organic carbon from water (TOC/COD/BOD) is becoming important in many industries because of stricter discharge requirements or increased water quality standards for internal water use. Ultraviolet (UV) Ozone based advanced oxidation processes can remove organic compounds from water in an environmentally sustainable ...
-
Manufactured by cleanwater1, Inc.based in USA
Fluid Dynamics dynaBLEND® dilutes, mixes and thoroughly activates emulsion, dispersion and solution polymers including new high molecular weight ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you