Only show results in Virginia? Ok

Water Pipe Testing equipment

  • Premium

    Water Services - Model WSI-BS-150-58-266-SS - Customized Booster Pump Skids

    The WSI-BS-150-58-266-SS Booster Pump Skid is designed to boost pressure of culinary water systems. It is ideal for use in buildings or camps with 150 to 180 people, or any other application where 150GPM and constant pressure is required.

    By Water Services Inc. based in Provo, UTAH (USA). from Customized Booster Pump Skids Product line

  • Showcase

    Arjay - Model 4100-OWM - Oil/Water Monitor

    Continuous monitoring for % concentration of water in oil emulsions. The 4100-OWM is used for monitoring as the water phase changes to oil in a tank or pipe. A probe inserted into a tank or pipe measures the capacitance field. This is ideal for general oil-in-water testing and other liquid phase changes in a process.

    By Arjay Engineering Ltd. based in Oakville, ONTARIO (CANADA). from Other Product line

  • Premium

    Stop It - Model CR-U - Custom Repair - Urethane System

    When mechanical systems shut down, so does production. Stop It CR-U is a low-cost, customized composite system to repair and reinforce mechanical systems, structures and piping. Furnished factory-impregnated with our proprietary urethane resin, it’s odorless, non-flammable, ready to apply, and cures by way of a chemical reaction with water. ...

    By InduMar Products, Inc. based in Houston, TEXAS (USA). from Pipe Remediation Product line

  • Premium

    Plugco - Model PPTP Series - Professional Pipe Test Plugs

    Model designation is Professional Pipe Test Plug (PPTP). Professional Pipe Test Plugs are custom product that allowing to discharge the compressed air inside the pipe line while filling the system by water. Professional Pipe Test Plug includes two bypass line in order to use water fiiling and air discharging.

    By PLUGCO based in Corum, TURKEY.

  • Model U Pipe - Direct Flow Double Manifold System

    Logical Energy are the sole distributors for the German certified evacuated  tube collectors manufactured to EN12975. Carefully selected for performance, aesthetics, ease of installation and lack of required maintenance, these MCS approved collectors represent the best value per kW of any system on the market and outperform most other branded ...

    By Logical Energy based in Wimborne -Dorset, UNITED KINGDOM.

  • Premium

    Ovivo - Suction Pipe Clarifier

    The Ovivo suction pipe clarifier is designed for municipal wastewater treatment applications. It features rapid sludge removal by suction, using 'organ' pipes instead of a suction duct as in the Ovivo suction header clarifier model. Maximizing sludge concentration, providing low effluent suspended solids and efficient scum removal, this clarifier ...

  • Premium

    Plugco - Model PTP Series - Inflatable Pipe Test Plug- Pipe Balloon - Pipe Stopper

    Model designation is Pipe Test Plug (PTP). It is totally same as Pipe Plug (PP) model except that includes bypass connection. Pipe Test Plug (PTP) connection allows water filling inside pipe line if there is no manhole access to pipe line or Pipe Test Plug (PTP) connection can be used for bypass the flow and discharge to another line with a ...

    By PLUGCO based in Corum, TURKEY.

  • Premium

    Plugco - Model CTP - Conical Pipe Test Plug, Cushion

    Conical pipe plug or seal cushions use for stopper of flow of water or sewer. Light weigh, fold-able shape allows to use confined space applications.

    By PLUGCO based in Corum, TURKEY.

  • Test Pipe Plugs

    Test plugs are equipped with one or more flow throughs. These plugs are suitable for carrying out pressure tests with water or air in accordance with the standard EN1610. Or these plugs can be used fot the realization of a bypass. These test pipe plugs are very robust and the couplings are of the best quality in order to avoid leakage.

    By Lansas BV based in Eijsden, NETHERLANDS. from Test Product line

  • Pipe End Caps

    Used to provide a temporary water and dirt seal at the end of a pipe. Useful for sealing road crossings laid prior to the main pipeline.

    By Pipe Equipment Specialists Ltd. (PESL) based in Thornaby, UNITED KINGDOM. from Pipe Testing Product line

  • NBR/ Nitrile Test Pipe Plugs

    Test pipe plugs are equipped with one or more flow throughs. These test pipe plugs are suitable for carrying out pressure tests with water or air in accordance with the standard EN1610. The test pipe plugs can also be used fot the realization of a bypass. Our test pipe plugs are also available in NBR/ Nitrile. Nitril is resistant to oils, greases ...

    By Lansas BV based in Eijsden, NETHERLANDS. from Test Product line

  • Premium

    Ovivo FlexScour - Underdrain For Corrosion-Resistant System

    The innovative Ovivo® FlexScour® underdrain design eliminates the two problems that have plagued other air + water cleaning systems, namely the improper sizing of variable diameter orifices and media displacement with surges or irregular flows. Reduced backwash and storage requirements make the system compact and economical, and enhances ...

    By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Municipal Drinking Water - Filtration Product line

  • Premium

    Ovivo - Bridge Supported Clarifier Units

    Ovivo bridge supported clarifier units have their sludge removal system hanging from a structural bridge spanning the tank. Wastewater enters through a side feed pipe into the center feedwell. The feedwell boosts flocculation of the suspended solids, which flow out into the clarifier to create a sludge blanket on the tank bottom. Rotating rake ...

  • SaniTite - Sanitary Sewer HDPE Pipe

    Hancor has maintained an ongoing commitment to environmental solutions for more than a century. That commitment has resulted in a new top performing High Density Polyethylene (HDPE) product for the sanitary sewer market. SaniTite Sanitary Sewer HDPE Pipe delivers the features that engineers, contractors and municipalities demand – ...

    By Hancor, Inc. based in Findlay, OHIO (USA). from Pipe Product line

  • Parixit - Model PE - Polyethylene Pipes

    Adaptation of High Density Polyethylene Pipes: High Density Polyethylene (HDPE) Pipes have been used for more than a decade in India and abroad. Today, HDPE Pipes and Fittings are the best option to have advantages like Corrosion Resistance, Non Toxicity, Durability, Light Weight with impact strength than most pipe problems caused by Cast Iron ...

    By Parixit Industries Limited based in Ahmedabad, INDIA. from Pipes Product line

  • HDPE Pipes and Fittings

    HDPE Pipe, Polyethylene (PE Pipe) are sorted by strength classified according to the intensity of the earlier technological developments. HDPE Pipe  pressure classes that can be made between Pn4-Pn32 and the production of the desired diameter and size of HDPE pressure pipe system has undergone many tests in 1950, particularly in the carriage ...

    By Allplasticpipe Corp. based in Aksaray, TURKEY. from Water Pipes Product line

  • Premium

    AquaTest - Model T10 - Robust Test Rod for Electro-Acoustic Water Leak Detection Outdoors

    The AquaTest T10 is a test rod with innovative technology and ergonomic design. Its strength lies in the prelocation of leaks in water pipe networks. The AquaTest T10 is the first test rod made by SEWERIN for which no additional receiver is required. The headphones are activated not by any common key but by a special sensor area. The noises that ...

    By Hermann Sewerin GmbH based in Gütersloh, GERMANY. from Electro-Acoustic Water Leak Detection Product line

  • PVC Water Pipes

    PVC Water Pipes, TS 274-2 at 1452-2 standards produced as required Pressure PVC water pipes DIN 8061-8062 in various diameters ,pass Muffle and Muffle Adhesive ASTM 1477 standard, it can be produced in the appropriate thickness according to the safety factor. The pipes are used in the territory under the conditions and to withstand the drinking ...

    By Allplasticpipe Corp. based in Aksaray, TURKEY. from Water Pipes Product line

  • Premium

    Plugco - Model PP Series - Inflatable Pipe Plugs

    Model Designation is Pipe Plug (PP). The main purpose of usage of PP model is blocking pipe or channels to stop fluid flow (water, sewage water or drain water). Pipe Plugs are used for pipeline leakage test, if there is an available manhole on the line, the pipeline to be blocked from both side by two pieces Pipe Plug model plug and then the test ...

    By PLUGCO based in Corum, TURKEY.

  • Premium

    Ovivo - Plow Blade Scraper Clarifier

    The Ovivo plow blade scraper clarifier is designed mainly for municipal wastewater treatment applications. It features grit and sludge removal via rake blades and efficient scum removal. This model can be used for primary or secondary clarification processes and is available in bridge or column supported clarifier designs.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you