Water Profiler Equipment Near Nigeria
-
Manufactured by PermAlert, a division of Perma-Pipe, Inc.based in USA
The ATP is a highly durable sensing cable designed specifically for insulated pipe and accurately detect water leak. The low profile design of the cable allows for cable to securely attached to the carrier pipe during foam insulation process and provide ease of field joint. The ATP cable will only work with the PAL-AT system. Highly durable ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
Highly accurate yet easy to use: With the ML3 ThetaProbe Soil Moisture Sensor it’s easy to make reliable, accurate soil moisture measurements. Simply insert the soil moisture probe into the soil, connect to your data logger or readout unit, provide 5-14 V DC at 18 mA, and within seconds you can be logging soil moisture. The ML3 ThetaProbe is robust, buriable and maintenance free ...
-
PremiumManufactured by Delta-T Devices Ltd.based in UNITED KINGDOM
No other soil moisture probe system enables you to monitor your soil water profiles with such ease and flexibility. Install an access tube into the soil, insert the PR2 Profile Probe and press the HH2 [Read] button to display an instantaneous reading, or connect the PR2 to a data logger (GP2 or DL6) and leave the system to record soil ...
-
Manufactured by Arjay Engineeringbased in CANADA
Continuous profiling of oil/water interface and emulsions in tanks. Multiple capacitance probes staggered in an oil/water separator will provide a profile of the emulsion location and thickness. The 4100-PRO uses multiple sensing probes to measure the capacitance field at distinct points within the tank. The resulting ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable monitoring of oil/water interface and emulsions. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater ...
-
Manufactured by Arjay Engineeringbased in CANADA
Reliable monitoring of oil/water interface and emulsions. The sensing probe continuously monitors the capacitance of the inserted probe. As the interface or emulsion layer (rag layer) crosses over the probe, a proportional 4-20 mA output is provided. Typical applications include oil water separators, oil/water knock-out tanks, treater ...
-
Manufactured by Hach - Veraltobased in USA
Knowledge gained through years of in-the-field flow measurement experience has come together in the Hach FH950 Handheld Flow Meter. Designed for use in both environmental and sewer/wastewater flow measurement scenarios — whether you’re profiling water current in streams and rivers, providing redundant verification of wastewater ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The ULF Compact Sub-Bottom Profiler is ideal for applications that require high resolution CHIRP sub- bottom images along with deeper penetration in difficult sediments such as hard-packed ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
The HMS-650 is a very rugged, high power, underwater transducer specifically designed for marine sub-bottom profilers and echo-sounders. The transducer is designed to operate in the 200Hz to 2kHz frequency range. The transducer is suitable for operation in a variety of array configurations to support shallow water sub-bottom profiling ...
-
PremiumManufactured by Falmouth Scientific, Inc. (FSI)based in USA
Deep water sub-bottom profiling applications (1Km to 12Km) require an array of 4 to 36 low frequency transducers installed in a hull-mounted sea chest. The HMS-12KM system with the HMS-622 CHIRPceiverTM and hull mounted transducer arrays fills this range of survey requirements. The frequency bands supported by the HMS- 12KM include LF ...
-
Manufactured by Droplet Measurement Technologies (DMT)based in USA
The SPIN is the first commercially available ice nuclei counter, with a particle detection range from 0.3 μm to 10 μm. Particle detection allows for individual particle sizing and discrimination of ice and water particles using polarization change in the scattered ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Mobile measurement system for discharge measurement in watercourses, such as rivers, streams and canals. The NivuFlow Stick is a mobile measurement system for discharge measurement in watercourses, such as rivers, streams and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS225 is a prime example of our commitment to provide the highest-quality monitoring products in the world. Our revamped design, rigorous validation process, and stringent quality standards are all focused on providing the fantastic quality you require to reliably generate data you can trust, even in the harshest of environments. Learn more about the CS225's quality testing and validation ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SoilVUE™10 is a soil water content profile sensor powered by Campbell TrueWave™TDR technology. This soil moisture, electrical conductivity, and temperature profile sensor was developed with environmental researchers and environmental monitoring networks in mind. The SoilVUE™10 represents several exciting ...
-
Manufactured by Campbell Scientific, Inc.based in USA
of the temperature points within the profile, while protecting the temperature sensors in all mediums for the long-term. The CS230 is suited for a wide variety of applications and environments. The completely sealed probe assembly and external probes permit the CS230 to be used in roadbeds, soils, and water (snow and ice). Applications where the CS230 is ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS231 offers the same precise temperature profiling as our CS230 SDI-12 Temperature Profiler, but with a slimmer design for easier use in borehole and road applications. The CS231 requires a smaller installation hole when compared to the CS230. For road applications, this means easier drilling, as well as less time and material to ...
-
Manufactured by Quilton S.A.based in SPAIN
, which rests against the length of the drum. The filtered water flows through the profiles of the drum screen through to the collection chamber and exits the rotor screen through a flanged ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Camera-based measurement system for acquisition of the surface velocity profile and water level // Direct calculation of the discharge // Non-intrusive measurement method using only one sensor (camera) // Data storage and remote transmission of measurement data and images // Intelligent alarm management ...
-
Manufactured by SEBA Hydrometrie GmbH & Co. KGbased in GERMANY
Portable hand-held device for determining the current water level and the water temperature in water depths up to 500 m and sounding pipes from Ø 1" // Membrane keypad with backlit LCD to display temperature // Optical and acoustic signal on contact with water // Robust aluminum support frame ...
-
Manufactured by KC-Denmark A/Sbased in DENMARK
Antenna for radio or satellite beacons. The flash and radar reflector are manufactured from reinforced fibre glass with a bend restrictor at the base The autonomous vehicles can be equipped with units for: water column profiling, chamber incubation, micro profiling over the sediment-water interface, sediment core catching, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you