water quality Equipment in Belgium

304 Results found

Current filtering criteria

You can remove a filter by clicking on the x

HORIBA - Model D-50 Series - Handheld Water Quality Meter

by HORIBA Europe GmbH     Office in BELGIUM

Revolutionary waterproof meter and electrodes enhance care-free operation in the lab or field.

HORIBA - Model U-50 Series - Multiparameter Water Quality Checker

by HORIBA Europe GmbH     Office in BELGIUM

U-50 series Multi-parameter water quality checker enables to measure and indicate the monitoring result simultaneously up to 11 parameters with one unit. Tough & powerful design, considering user friendly field monitoring on site, such as rive, ground water, drainage water, etc. bring together feature of function and performance, which makes ...

HORIBA LAQUA - Model F-70 Series - Benchtop pH/Water Quality Analyzer

by HORIBA Europe GmbH     Office in BELGIUM

The HORIBA LAQUA F-70 series marries advanced technology with stylish design and an easy-to-use touch screen interface. The LAQUA series was developed as a durable meters offering long term reliability for laboratory professionals. Advanced functionalities and a wide array of electrodes provide high precision measurement with improved response ...

HORIBA - Model FES-210L - Sanitary Conductivity Sensor (Ferrule Clamp Type)

by HORIBA Europe GmbH     Office in BELGIUM

The FES-210L Series sanitary conductivity sensors are electric sensors that target sanitation issues by employing a flat structure that keeps dirt from adhering to the tip of the sensor, and they enable continuous, high accuracy measurement in liquids of various concentrations, from purified water to cleaning solutions. The FES-210L Series, which ...

HORIBA - Model HE-960HI - Sanitary Conductivity Meter (Wide-Range Type)

by HORIBA Europe GmbH     Office in BELGIUM

The HE-960HI is a wide-range type sanitary electric conductivity meter that can measure over a wide range from manufacturing water up to 500 mS/cm, and enables advanced concentration management through abundant outputs. Cleaning-in-Place (CIP) terminal management and a reduction in cleaning solutions is also achieved through accurate surface ...

HORIBA - Model FS-01FC-SL Series - Sanitary Conductivity Sensor for Low Concentrations

by HORIBA Europe GmbH     Office in BELGIUM

Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FS Series sanitary conductivity sensor, which is used ...

HORIBA - Model HT-110 - Online TOC-Analyzer

by HORIBA Europe GmbH     Office in BELGIUM

The continuous online TOC-Analyzer HT-110 is suitable for the measurement ot total organic carbons in Purified Water (PW), Water For Injection (WFI) and Highly Purified Water (HPW). The unit is operating according to USP 643. It is applicable for pharmaceutical and/or semiconductor manufacturing. The measuring principle is based on UV-Oxidation ...

HORIBA - Model ESH-01-C-SN - Sanitary Conductivity Sensor for Low Concentrations

by HORIBA Europe GmbH     Office in BELGIUM

The ESH-01-C-SN conductivity sensor, which is used in conjunction with the HE-960CW conductivity converter, is ideal for controlling conductivity in the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals.

HORIBA - Model HE-960CW - 2-Channel Sanitary Conductivity Meter

by HORIBA Europe GmbH     Office in BELGIUM

The HE-960CW is ideal for the conductivity control of the purified water, pasteurized water, and water for injection that are used in the production of pharmaceuticals. And we have developed a lineup of electric conductivity sensors that can be used in conjunction, from the conventional insertion type to the flow-through type with improved ...

HORIBA - Model ES-51 - Portable Conductivity/Resistivity/Salinity Meter

by HORIBA Europe GmbH     Office in BELGIUM

This conductivity meter measures conductivity, resistivity and salt in water solutions. It is a field type, with a waterproof case, and is easy to hold and move. It enables anyone to conduct high-precision measurement, anytime and anywhere. Naturally it can be used by specialists at research institutions, but it can be also be used in wide range ...

HORIBA - Model OM-51 - Portable Dissolved Oxygen Meter

by HORIBA Europe GmbH     Office in BELGIUM

This field-type dissolved oxygen meter measures dissolved oxygen concentration (DO), oxygen concentration (O2), saturation (SAT.RATIO) and temperature of water solutions. It uses a laboratory sensor to enable BOD measurement. Waterproof construction enables use at virtually any measurement site. This meter is being used in research institutions, ...

HORIBA - Model FES-310L - Sanitary Conductivity Sensor (Flow Through Type)

by HORIBA Europe GmbH     Office in BELGIUM

Since this flow-through type sensor has no internal protuberances, fluid flows through the sensor with exactly the same inside diameter as the pipe, thus helping reduce fluid retention and ensuring that CIP chemical fluid is drained completely, which results in higher cleaning performance. The FES-310L Series sanitary conductivity sensors, which ...

AppliTek AppliTOX - On-line Broadband Toxicity Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The AppliTOX On-line Broadband Toxicity Analyzer is a fully automated batch bio-assay based on the well-established ISO 11348-Part 1 laboratory procedure. The original test protocol has been used since the 1980s and is accepted as a standard method in a large number of countries and applications. The AppliTOX® analyzer system allows you to ...

AppliTek Ra-TOX - On-line Toxicity Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The Ra-TOX On-line Toxicity Analyzer has been designed to detect acute toxic effects of incoming waste water streams of waste water treatment plants. The technology as incorporated is based on the respiration rate (expressed as mg O2/l.h), one of the most important parameters for the biological activity of activated sludge. The Ra-TOX respiration ...

HORIBA LAQUA - Model DS-70 Series - Benchtop Conductivity Meter

by HORIBA Europe GmbH     Office in BELGIUM

LAQUA DS-70 series measures Conductivity, Resistivity, Salinity, TDS and Temperature simultaneously and the Model DS-72 complies with industrial pharmacopoeias standard (JIS, USP, EP, JP and CP). The meters’ auto diagnostic function allows the user to make sure that the instruments will always give high performance and reliable measurements. ...

AppliTek TONI - On-line TN Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

Introducing the award-winning TONI On-line Analyzer. The TONI is a unique on-line wet-chemical analyzer for determining true Total Nitrogen values in water matrices, according to international standard method 4500-N. Appropriate oxidation method (NO high temperature): the system guarantees that all nitrogen compounds are completely oxidized before ...

AppliTek AppliTOC - On-line TOC analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The AppliTOC is AppliTek's flagship for determining the organic load or organic contamination in water matrices, with many references around the Globe. The technology as incorporated in the AppliTOC is the well established UV persulphate method assuring full compliance with international standard methods (see below). The on-line analyzer is a ...

AppliTek Ra-BOD - On-line BOD Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The Ra-BOD is a unique process analyzer for determining short-term Biological Oxygen Demand (BODst) in waste water and surface water and fits into a control strategy for activated sludge plants. The respiration rate (expressed as mg O2/l.h) is one of the most important parameters for the biological activity of activated sludge. Consequently, the ...

AppliTek EnviroLyzer - Series of On-line Colorimetric Analyzers

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The EnviroLyzer® is a genuine on-line wet-chemical analyzer with small footprint for determining single parameters in water matrices. The new AppliTek analyzer platform has been built taking into account the highest design standards also used in our UPA and IPA process analyzers, resulting into an analyzer of extremely high quality and ...

AppliTek - Model VPA - Voltammetric Process Analyzer

by AppliTek NV - Environmental Analysis Division     based in Nazareth, BELGIUM

The VPA Voltammetric Process Analyzer is the latest addition in AppliTek's portfolio of xPA Process Analyzers.

Need help finding the right suppliers?

Let the XPRTs do the work for you