Showing results for: Water Sampling Equipment Near Iraq
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The sampler ‘Watertrap’ has been designed to take representative samples from running water up to a depth of approx. 25 meter. Samples are taken with the stainless steel device by catching part of a horizontal moving column at a certain moment at a certain ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Kemmerer water sampler (vertical water bottle) is used for general water sampling in lakes, channels, wells and the sea. This sampler consists entirely out of plastic parts so that there is no risk of the sample coming into contact with metal. The Kemmerer water sampler holds 1.2 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This bailer sampler consists of a stainless steel tube and is available in a design with a 33 mm or 45 mm diameter and a content of resp. 250 ml and 1000 ml. The stainless steel tube is open at the top-end and fitted with an unscrewable cap at the bottom. A ball check is fitted in the bottom. As soon as the water sampler is lowered it ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This translucent teflon and stainless steel sampler is specially suitable for the indication of layers, measuring the thickness of the floating layer and the sampling of drums, tanks on lorries, gully holes and shallow oil separators. With the liquid layer sampler also depth specific samples can be taken. The translucent sample tube ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The filter apparatus, suitable for field and laboratory, has a net filtration area of 130 cm2. The medium to be filtered only has contact with the chemically inert teflon. The rest of the apparatus consist of stainless steel. If the proper filter membrane is used, very agressive fluids and gasses can also be filtered. The filter apparatus can be connected in-line to a peristaltic pump, nitrogen ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This low cost submersible pump set is suitable for use in monitoring wells with a diameter of minimal 40 mm. The set includes three submersible pumps “Gigant”, three booster pumps, a roll of extension cable, sealed crimp splices (to make a waterproof cable extension), a roll of polyethylene sampling tube and a battery with ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Fit for all types of water samplings. Very cheap, allows renewal prior to each sampling event. Environmentally friendly plastic (PE). PE: No phthalates, metals, colorants. Extremely low leaching characteristics are ETU tested 2x/yr. Every roll comes with a certificate showing all leaching data above detection limits. Produced and packed by ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
This self-priming (up to a depth of 6 meter) centrifugal pump is used primarily for (fast) purging or emptying of monitoring wells and bore holes. Other applications are pumping water for irrigation, drinking water for cattle, etc. The pump has a quiet, reliable starting, economical fourstroke engine running on ordinary or unleaded ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sample bottle at 250 cc with glass ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Suspended load sampler, Delft bottle type, standard set for sampling particles larger than 50 mu. Applicable in velocities till 2.5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
for use with in-line filters) and an underpressure maximum of 1 bar. It is a selfpriming pump. Even when the pump is out of use the pump tube is completely pressed by at least one roller. Fluid and gas can not flow back. Using the hand-operated peristaltic pump water can be pumped from a depth of up to 9.5 meter. The hand-operated peristaltic ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The bailer samplers of rigid transparent teflon are supplied in various sizes and diameters. A special teflon coated cable can be delivered for lowering and raising the samplers. For all sizes a teflon emptying device is available to allow drainage of the sampler without any aeration or turbulence. HDPE and pvc disposable bailer samplers including bottom emptying device are also ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Free water samples from soil particles. Needed for (trace) metal analyses. No special knowledge or discipline required. No contamination risk in any case. Severe QC/QA assure integrity of filters. Different capacities for various sediment loads. Perfect in combination with peristaltic pump. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Besides bentonite plugs, Eijkelkamp Soil & Water also supplies bentonite pellets in bags. The bentonite, type QSE is suitable for restoring unpermeable layers in the soil, supplied in a sack of 25 kg, pellets have a diameter of 6 to 7 mm, Enslin value (swelling capacity) after 24 hours minimal 700%, with KIWA product certificate ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
10.94 Bentonite plugs, supplied in packs. 10.95 Bentonite plugs in pallet packages. Bentonite plugs are used for sealing bores to prevent water mixing from different aquifers, after ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Water sampling and field analysing set, complete standard ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Two tubes, with a diameter of 10 or 16 mm, can be fitted on the hand-operated foot valve pump. The lever hinges on a tripod of which the height can be adjusted. In this way it is possible to take samples from wells fitted with a shaft type well cover as well as street type well covers. The hinge point of the lever can be moved quickly, in this ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you