Water Sensor Equipment Near Solomon Islands
-
Manufactured by PumpEng Pty Ltdbased in AUSTRALIA
The CorroTuff Smart Pump is designed for use in any operation whether it be DIY, construction or mining. With the phase rotation protection, this makes sure the pump does not operate in the incorrect direction which can cause premature failure and has a fitted level switch for auto start. The CorroTuff Smart pump ranges from 1.5kW up to 11.0kW so there is a Smart pump for any ...
-
Manufactured by PumpEng Pty Ltdbased in AUSTRALIA
The MiniScat is the ideal Submersible Slurry pump for those small areas. With electrical smarts built in and Hrc agitator, this makes for a trouble free, set and forget submersible ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS547A probe monitors the electrical conductivity (EC) and temperature of water. EC is measured with three cylindrical stainless-steel electrodes mounted in an epoxy housing. The electrode configuration eliminates ground loop problems associated with sensors in electrical contact with earth ground. The electrodes are ac coupled, and a ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 109 is a rugged, accurate probe that measures air, soil, and water temperature for a variety of applications. It consists of a thermistor encapsulated in an epoxy-filled aluminum housing. The housing protects the thermistor, allowing you to bury the 109 in soil or submerge it in water. The 109 measures from -50° to ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS475A radar sensor monitors the water level of rivers, lakes, tidal seas, and reservoirs. The sensor is ideal for areas where submersed sensors can be damaged due to corrosion, contamination, flood-related debris, lightning, or vandalism. It emits short microwave pulses and then measures the elapsed time between the emission ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50A Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The HS2 is the handheld display for the new Hydrosense II soil-water sensor. When paired with either the CS658 or CS659 portable soil-water probes, it replaces the previous Hydrosense soil-water system. It features a new handheld display and a new probe design. The HS2 handheld has been designed to be compact and portable, with ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50AH Heated Sonic Distance Sensor provides a non-contact method for determining snow depth. It determines depth by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. An air temperature measurement is required to correct for variations of the speed of sound in air. The ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50AT-L is an acoustic distance sensor that measures the elapsed time between emission and return of an ultrasonic pulse. This measurement can be used to determine snow depth. The SR50AT-L includes an external temperature sensor and outputs a temperature-corrected distance reading, eliminating the need for further post-processing. ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS725 measures snow-water equivalent (SWE) by passively detecting the change in naturally occurring electromagnetic energy from the ground after it passes through snow cover. It is mounted above the ground and has no contact with the snow. As the snow pack increases, the sensor detects the attenuation of the electromagnetic energy ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 109SS is a rugged, accurate probe that measures soil or water temperature from -40° to +70°C. The 109SS consists of a thermistor encased in a sheath made from grade 316L stainless steel. The rugged stainless-steel sheath protects the thermistor, allowing you to bury or submerge the 109SS in harsh, corrosive environments. This ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The HS2P is a combination of the Hydrosense II soil-water sensor with a strong handle and pole that make it easier to insert the probes into the soil. The lightweight pole allows soil testing without bending over. The HS2P is compact and portable, with the layout of the buttons on the display allowing for operation with one hand. Two ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS225 is a prime example of our commitment to provide the highest-quality monitoring products in the world. Our revamped design, rigorous validation process, and stringent quality standards are all focused on providing the fantastic quality you require to reliably generate data you can trust, even in the harshest of environments. Learn more about the CS225's quality testing and validation ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SDMS40 is a powerful and cost-effective 2D multipoint, laser-based snowfall sensor. In the past, multipoint laser-based snow depth sensors have typically been complex and costly, so the practical SDMS40 was developed to address those issues. Performance and reliability of the device have been proven with thorough testing of the sensor and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 108 is a rugged, accurate probe that measures temperature of air, soil, or water from -5° to +95°C. It easily interfaces with most Campbell Scientific data loggers and can be used in a variety of applications. The 108 consists of a thermistor encapsulated in an epoxy-filled aluminum housing. The housing protects the ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50ATH is a sonic distance sensor with an integrated external temperature probe and heater. Sonic sensors determine distance by emitting an ultrasonic pulse and then measuring the elapsed time between the emission and return of the pulse. The temperature probe allows the SR50AT series to output temperature-corrected values (speed of ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SoilVUE™10 is a soil water content profile sensor powered by Campbell TrueWave™TDR technology. This soil moisture, electrical conductivity, and temperature profile sensor was developed with environmental researchers and environmental monitoring networks in mind. The SoilVUE™10 represents several exciting ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The SR50A-EE is an anodized version of Campbell Scientific's acoustic sensor for measuring the distance from the sensor to the snow surface. The sensor has been designed to operate in extreme environmental conditions where corrosion is a concern (such as coastal regions). The SR50A-EE features an aluminum body that has been treated with a Type ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The CS547A probe monitors the electrical conductivity (EC) and temperature of water. EC is measured with three cylindrical stainless-steel electrodes mounted in an epoxy housing. The electrode configuration eliminates ground loop problems associated with sensors in electrical contact with earth ground. The electrodes are ac coupled, and a ...
-
Manufactured by Innomar Technologie GmbHbased in GERMANY
The Innomar SES-2000 deep-15 parametric sub-bottom profiler is designed for offshore applications down to 11,000m water depth. This model features full motion compensation for heave, roll and pitch vessel movements. The Innomar SES-2000 deep-15 SBP acquires full-waveform data that can be processed with any seismic software (SEG-Y ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you