Water Treatment Equipment Near Maine
-
Manufactured by DDI Heat Exchangers Inc.based in CANADA
The 3 key advantages of our DDI technology are due to our Patented Technology of Rectangular channeled heat exchangers.It is not the common tube-in-shell technology nor the common Spiral structure of heat exchangers. WE BUY YOUR WASTE. Worlds only direct SLUDGE TO SLUDGE heat ...
-
Manufactured by ErtelAlsopbased in USA
include oil mixing in food storage and flocculation in water ...
-
based in USA
stage and two stage). Deming (Self priming pumps, split case pumps, end suction pumps, single stage and two stage). Simflo (Vertical turbine pumps for water supply, treatment, and municipal systems. Bowl size from 4 inches through 28 inches). Tsurumi Pumps (Portable pumps (single phase); contractor pumps (three phase); municipal pumps; stainless ...
-
based in USA
CSI (Instrumentation and control systems for wastewater and water treatment plants. Pump, motor controls and system monitoring equipment. Complete design, manufacture and service of automated electrical control equipment). Microtelinc (Automatic telephone dialers for monitoring municipal and private clients using standard telephone ...
-
Manufactured by ECT2based in USA
Demonstrated ability to treat 1,4-dioxane to consistently less than 0.2 µg/L, meeting all current and proposed treatment standards. Consistent, reliable treatment, independent of changes in influent concentrations and flow rates. System simplicity resulting in reduced operator over-sight. Increased compliance performance at a lower ...
-
Manufactured by ECT2based in USA
Five to 20 times higher capacity than activated carbon for PFOS and PFOA. Highly effective on broad range of PFAS. Systems designed to treat all PFAS to non-detect. System is regenerable on site, and therefore more sustainable and cost-effective than other technologies. Technology was successfully demonstrated at the former Pease Air Force Base in NH. Smaller footprint, lower capital and ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
Process Wastewater Technologies and Applied Engineering Technologies (AET) have partnered together to develop a fully-automated, patented* treatment shaft process for CSO control systems. The technology provides proper disinfection contact time, vessel flushing, air venting, odor control, surge control, skimming, and settling in a ...
-
Manufactured by Process Wastewater Technologies LLCbased in USA
The SanSep provides a much more efficient level of solids removal than other mechanical and static screening devices that are typically used in wet-weather excess sanitary flow treatment. Utilizing patented PWTech technology, the SanSep allows screening of the solids without blocking. It greatly reduces the impact of excess wet-weather ...
-
based in USA
. Heavy metals, volatile organic compounds, semi-volatile organic compounds and certain inorganics can effectively be treated in-situ with minimal disturbance (i.e. no vapor treatment required; only low voltage electrical supply used). ...
-
PremiumManufactured by BioMicrobics, Incbased in USA
The StormTEE screen separates debris and litter carried by storm water runoff before the water enters the treatment system (such as BioSTORM Storm Water Treatment System), detention ponds, or storm ...
-
Manufactured by United Equipment Technologies (UET) Mixers, Inc.based in USA
Every XCEL-3 to 10 Series mixer is designed and manufactured for your application, using high quality components, engineered specifically for dependable mixer service. XCEL-3 to 10 Series mixers are available with pumping rates up to 54,000 gpm and utilize standard industrial motors up to 25 hp. Typical applications include storage tanks and ...
-
Manufactured by United Equipment Technologies (UET) Mixers, Inc.based in USA
PAC wafer-style static mixers are an ideal solution for highly turbulent mixing applications, when minimal space is available. These mixers are typically installed between two flanges. While most commonly used in the water treatment industry, PAC mixers can be used to add mixing wherever space restrictions ...
-
Manufactured by United Equipment Technologies (UET) Mixers, Inc.based in USA
Series 3 static mixers are best suited for applications with highly turbulent flow, such as water treatment and gas blending. The mixer consists of custom engineered, 45-degree mixing foils, welded inside of the pipe. These mixing foils create specific flow patterns that produce extremely efficient mixing with minimal ...
-
Manufactured by United Equipment Technologies (UET) Mixers, Inc.based in USA
; beverage, water treatment, and more. Materials of construction include a wide variety of standard and exotic metals, fiberglass, Teflon, PVC/CPVC, ...
-
Manufactured by Howell Laboratories, Inc.based in USA
feeder status indicator. Time totalizers keep track of total cartridge usage. Our patented Total Bromine Control System is available as an option with this unit. This system automatically controls the bromine level in the ship’s water storage tanks and alerts ship’s personnel when the bromine cartridges are ...
-
Manufactured by Howell Laboratories, Inc.based in USA
Consists of a bulkhead-mounted brominator assembly. The unique cartridge housing is manufactured from a high-strength plastic that will never corrode. Combined with the corrosion resistant fittings used throughout the unit, reliable service and long life are ensured. A water meter keeps track of cartridge ...
-
Manufactured by Howell Laboratories, Inc.based in USA
Designed to be capable of disinfecting two sources of water simultaneously using an injection process, with minimal operator attention. Electrically operated, package-type (bulkhead-mounted) unit ready for operation (turn-key system) with a footprint of 48 inches wide x 12 inches deep x 48 inches high. Uses granular or pellet salt (sodium ...
-
Manufactured by Howell Laboratories, Inc.based in USA
Provides point-of-use protection against bio-fouling in marine equipment. Easily set up in a machinery space near a seawater intake. Typical applications include heat exchangers, ship seawater systems, engine cooling systems, and electronic component skids. Portable and ideal for temporary maintenance applications, but also designed for continuous operation in permanent ...
-
Manufactured by Howell Laboratories, Inc.based in USA
Easily installed dockside near the discharge of any cooling system where chlorine is used to prevent bio-fouling of the cooling water. Typical applications include heat exchangers, ship seawater systems, engine cooling systems, and electronic component skids. Ideal for temporary maintenance applications or continuous operation in ...
-
Manufactured by SPX Corporationbased in USA
SPX Cooling Technologies embarked on a mission to design and build a cooling tower like no other in the world. Like adventurers climbing Mt. Everest, we knew the challenges yet were driven to achieve something remarkable. We forged a path to the summit that takes cooling to a higher level. The result, the NC Everest, provides epic customer advantages, with up to 50% greater cooling capacity, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you