We couldn't find any water-use certification equipment suppliers or service providers located in Bhutan

Here is a list of equipment results with suppliers serving Bhutan

water-use certification equipment available in Bhutan

  • Premium

    GE ReadyCircuit - Single-use Pump Tubing Assemblies

    ReadyCircuit single-use jumper tube sets with Pumpsil tubing terminating with ReadyMate connectors. Recommended pump: Watson Marlow series 520. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuit to interconnect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Pump Tubing Assemblies Product line

  • Premium

    GE ReadyCircuit - Single-use Jumper Tube Sets

    ReadyCircuit jumper tube set with C-Flex ID tubing terminating with ReadyMate to Steam-Thru TC connector connectors. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuits to connect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a certificate of quality. C-Flex ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Jumper Tube Sets Product line

  • Premium

    GE ReadyCircuit - Single-use Jumper Tube Sets: SterilEnz TC Connectors

    ReadyCircuit jumper tube set with C-Flex ID tubing terminating with ReadyMate to SterilEnz TC connectors. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuits to connect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a certificate of quality. C-Flex jumpers ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Jumper Tube Sets: SterilEnz TC Connectors Product line

  • Premium

    Whatman GF/C RTU - Model 3822-047 - Whatman GF/C RTU Glass Mircofiber Filters for Water Testing

    The GF/C RTU line pre-treats our traditional GF/C filter with washing, drying, cooling (in a desiccator), and weighing steps aligned to the requirements of EN 872 – the European norm for suspended solids in water testing. The GE quality organization certifies that these filters have weight loss of less than 0.017 mg/cm2 after preparation, which is ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Whatman GF/C RTU Glass Mircofiber Filters for Water Testing Product line

  • Premium

    HARDEN - Model TD912 - copper wire shredder

    Harden Industries Ltd. studied and manufactured two shaft shredders for over 12 years. With hundreds of shredding test and technological innovation, our exclusive designs are proved in making shredders more durable and low cost in maintenance. A particular chamber resists impacts of shredding materials to seals and inside parts. It makes a long ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    LMP 808 - Model LMP 808 - Hydrostatic Level Probe LMP 808

    The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily.Features:- nominal pressure: 0 ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMK 351 - Model DMK 351 - Pressure Transmitter DMK 351

    The pressure transmitter DMK 351 has been specially designed for applications in plant and machine engineering as well as laboratory techniques and is suitable for measuring small system pressure and filling heights. By using our own-developed capacitive sensor, optionally available as AI2O3 99.9%, the DMK 351 offers a high overpressure resistance ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 307 T - Model LMK 307 T - Hydrostatic Level Probe LMK 307 T

    BD|SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DPT 100 - Model DPT 100 - Differential Pressure Transmitter DPT 100

    The differential pressure transmitter DPT 100 has been especially designed for fast test processes in leakage and flow measurement, where a fast response time and high sampling rate are necessary.The compact design of the DPT 100 facilitates the use in standardised applications, e. g., and the installation in 19“ Rack.The DPT 100 with optionally ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 808 - Model LMK 808 - Hydrostatic Level Probe LMK 808

    The separable plastic submersible probe LMK 808 was developed for level and gauge measurement in water and wastewater for level measurement of fuel and oils. The mechanical robustness of the front-flush ceramic diaphragm facilitates an easy disassembly and cleaning of the probe in case of service.In order to facilitate stock-keeping and ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 306 - Model LMK 306 - Hydrostatic Level Probe LMK 306

    The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids.Different cable sheath materials are available in order to achieve maximum media compatibility.Features:- nominal pressure: 0 ... 6 ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 358 - Model LMK 358 - Hydrostatic Level Probe LMK 358

    The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily.Features:- nominal ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 807 - Model LMK 807 - Hydrostatic Level Probe LMK 807 series

    The plastic submersible probe LMK 807 is designed for continous level measurement for waste water or and different aggressive media. Basic element of the plastic submersible probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and elastomer materials are available in ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 358H - Model LMK 358H - Hydrostatic Level Probe LMK 358H

    The separable stainless steel probe LMK 358H has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily.Features:- nominal ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 809 - Model LMK 809 - Hydrostatic Level Probe LMK 809

    The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DPT 200 - Model DPT 200 - Differential Pressure Transmitter DPT 200

    The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc.The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 334 - Model DMP 334 - Pressure Transmitter DMP 334

    The industrial pressure transmitter DMP 334 has been especially designed for use in hydraulic systems up to 2200 bar. The base element of DMP 334 is a thinfilm sensor, that is welded with the pressure port and meets high demands of foolproofness and reliability. All of characteristics and the excellent mesurement data of DMP 334 as well as ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 331 - Model DMP 331 - Pressure Transmitter DMP 331

    The pressure transmitter DMP 331 can be used in all industrial areas when the medium is compatible with stainless steel 1.4404 (316 L) or 1.4435 (316 L). Additional are different elastomer seals as well as a helium tested welded version available. The modulare concept of the device allows to combine different stainless steel sensors and electronic ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMP 305 - Hydrostatic Level Probe LMP 305

    The slimline probe LMP 305 with silicon stainless steel sensor is designed for continous level measurement in confined space conditions. Permissible media are clean or waste water and thin fluids. A piezoresistiv stainless steel sensor with low thermal error, an excellent linearity and a long term stability, is basis of LMP 305.Features:- nominal ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 331 P - Model DMP 331 P - Pressure Transmitter DMP 331 P

    The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you