We couldn't find any water-use certification equipment suppliers or service providers located in Turkmenistan

Here is a list of equipment results with suppliers serving Turkmenistan

water-use certification equipment available in Turkmenistan

  • Premium

    GE ReadyCircuit - Single-use Pump Tubing Assemblies

    ReadyCircuit single-use jumper tube sets with Pumpsil tubing terminating with ReadyMate connectors. Recommended pump: Watson Marlow series 520. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuit to interconnect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Pump Tubing Assemblies Product line

  • Premium

    GE ReadyCircuit - Single-use Jumper Tube Sets

    ReadyCircuit jumper tube set with C-Flex ID tubing terminating with ReadyMate to Steam-Thru TC connector connectors. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuits to connect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a certificate of quality. C-Flex ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Jumper Tube Sets Product line

  • Premium

    GE ReadyCircuit - Single-use Jumper Tube Sets: SterilEnz TC Connectors

    ReadyCircuit jumper tube set with C-Flex ID tubing terminating with ReadyMate to SterilEnz TC connectors. Port tubing and ReadyMate single-use connectors are preconfigured into ReadyCircuits to connect with a variety of ReadyCircuit process components. Jumper assemblies are supplied gamma-irradiated with a certificate of quality. C-Flex jumpers ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Single-use Jumper Tube Sets: SterilEnz TC Connectors Product line

  • Premium

    Whatman GF/C RTU - Model 3822-047 - Whatman GF/C RTU Glass Mircofiber Filters for Water Testing

    The GF/C RTU line pre-treats our traditional GF/C filter with washing, drying, cooling (in a desiccator), and weighing steps aligned to the requirements of EN 872 – the European norm for suspended solids in water testing. The GE quality organization certifies that these filters have weight loss of less than 0.017 mg/cm2 after preparation, which is ...

    By GE Healthcare Life Sciences based in Marlborough, MASSACHUSETTS (USA). from Whatman GF/C RTU Glass Mircofiber Filters for Water Testing Product line

  • Premium

    HARDEN - Model TD912 - copper wire shredder

    Harden Industries Ltd. studied and manufactured two shaft shredders for over 12 years. With hundreds of shredding test and technological innovation, our exclusive designs are proved in making shredders more durable and low cost in maintenance. A particular chamber resists impacts of shredding materials to seals and inside parts. It makes a long ...

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    LMP 305 - Hydrostatic Level Probe LMP 305

    The slimline probe LMP 305 with silicon stainless steel sensor is designed for continous level measurement in confined space conditions. Permissible media are clean or waste water and thin fluids. A piezoresistiv stainless steel sensor with low thermal error, an excellent linearity and a long term stability, is basis of LMP 305.Features:- nominal ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 339 - Model DMP 339 - Pressure Transmitter DMP 339

    The DMP 339 industrial pressure transmitter features a G ¼' flush pressure port and was designed for the use in a range of machinery including metering systems. It is ideal for measuring the pressure of viscous and pasty media, as only a small dead space is created. Material accumulation, dripping and stringing in machinery is eliminated. This ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 331 P - Model DMP 331 P - Pressure Transmitter DMP 331 P

    The pressure transmitter DMP 331P was designed for use in the food and pharmaceutical industry. The compact design with hygienic process connections makes it possible to achieve an outstanding performance in terms of accuracy, temperature behavior and long term stability. The modular construction concept allows a combination of various process ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 331 Pi - Model DMP 331 Pi - Pressure Transmitter DMP 331 Pi

    The precision pressure transmitter DMP 331Pi demonstrates the further development of well-tried industrial pressure transmitter DMP 331P. The signal from the specially designed piezoresistive stainless steel sensor is processed by the newly developed digital electronic system, performing thus an active compensation of sensor-specific deviations ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DCT 531 - Model DCT 531 - Pressure Transmitter DCT 531

    The DCT 531 with RS485 interface uses the communication protocol Modbus RTU which has found the way in industrial communication as an open protocol. The Modbus protocol is based on a master Slave architecture with which up to 247 Slaves can be questioned by a master – the data will transfer in binary form. Due to the usage of high quality ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 458H - Model LMK 458H - Hydrostatic Level Probe LMK 458H

    The LMK 458H has been developed for measuring level in service and storage tanks and is as a consequence certificated for shipbuilding and offshore applications. A permissible operating temperature of up to 85 °C and the possibility to use the device in intrinsic safe areas enable to measure the pressure of various fluids under extreme conditions. ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 457 - Model DMP 457 - Pressure Transmitter DMP 457

    The pressure transmitter DMP 457 has been especially designed for rough conditions occurring especially in shipbuilding and offshore applications. All gaseous and liquid media, which are compatible with stainless steel 1.4404 (316L) respectively can be used. Sensor element is a piezoresistive stainless steel sensor with high accuracy and excellent ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DM 17 - Model DM 17 - Digital Pressure Gauge DM 17

    The compact digital pressure gauge DM 17 is battery-powered and has an adjustable housing; it is thus extremely suitable for mobile pressure monitoring. An unusual feature of the DM17 is the welded pressure sensor. An absolute use in oxygen applications is given and strictest requirements on the particle liberty are fulfilled. The 4.5-digit ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    BAROLI 02 - Model BAROLI 02 - Digital Pressure Gauge BAROLI 02

    The battery-powered BAROLI 02 enables a local displaying of values, satisfying the highest demands for accuracy and long-term stability. The pressure gauge may be applied compatible with the stainless steel used; it shows an excellent robustness and a high overpressure protection. The BAROLI 02 display housing is rotatable, thus ensuring an easy ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    18.605 G - Model 18.605 G - Pressure Transmitter 18.605 G

    Features:- nominal pressure: 0 ... 1 mH2O up to 0 ... 10 mH2O- accuracy: 0.5 % FSO- piezoresistive stainless steel sensor - level measurement in water and fuel oil tanks

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMP 307 - Model LMP 307 - Hydrostatic Level Probe LMP 307

    The stainless steel probe LMP 307 is designed for continuous level measurement in water and clean or waste fluids. Basic element is a high quality stainless steel sensor with high requirements for exact measurement with excellent long term stability.Features:- nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O- accuracy: 0.1 % / 0.25 % / 0.35 % ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 307 - Model LMK 307 - Hydrostatic Level Probe LMK 307

    The level transmitter LMK 307 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the customer-specific operating ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DM 01 - Model DM 01 - Digital Pressure Gauge DM 01

    The digital pressure gauge DM 01 is a precision device fulfilling highest demands. It was conceived especially for the process monitoring and calibration. The advantage: With the digital display DM 01, different pressure transmitters can be used for various measurement ranges. Outstanding measuring qualities, an intuitive operation, as well as an ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    DMP 335 - Model DMP 335 - Pressure Transmitter DMP 335

    The industrial pressure transmitter DMP 335 is based on a stainless steel welded pressure sensor without fluid. This characteristic has a special advantage with applications where silicon oil or elastomeric seals cannot be used.Features:- nominal pressure: 0 ... 6 bar up to 0 ... 600 bar- accuracy: 0.5 % FSO- suitable for oxygen applications - ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

  • Premium

    LMK 382 - Model LMK 382 - Hydrostatic Level Probe LMK 382

    The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media.Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily.Features:- nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O- accuracy: 0.25 % / 0.35 % FSO- diameter ...

    By BD|SENSORS GmbH based in Thierstein, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you