Water Valve Control Equipment Near Georgia (US)
-
Manufactured by GA Industries, LLCbased in USA
The GA Altitude Valve is used on the inlet of water tanks, standpipes and reservoirs to prevent overflow when the supply head is greater than the maximum water level. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by GA Industries, LLCbased in USA
The GA Pressure Sustaining Valve protects the pressure integrity of the upstream system. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by GA Industries, LLCbased in USA
The GA Rate of Flow Control Valve limits the flow to the downstream system, regardless of fluctuations in upstream or downstream line pressure. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by US Jetting LLCbased in USA
make short work of any task. At 30 GPM, it does not use too much water so more work can done on a tankful before having to refill. It is an ideal machine for municipalities or contractors that want to cover all applications both large and ...
-
Manufactured by GA Industries, LLCbased in USA
The GA Pressure Reducing Valve functions to reduce a higher upstream pressure to a lower, downstream pressure regardless of fluctuations in pressure or variations in flow. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by US Jetting LLCbased in USA
or pulleys. It is available with up to 750 gallons of water storage on a tandem axle trailer and up to 1000 gallons mounted on certain trucks. The unit comes standard with one hydraulic powered reel with 500′ (150 M) of 3/4″ hose. It is also available with a second reel that can be fitted with 500′ of 1/2″ ...
-
Manufactured by GA Industries, LLCbased in USA
The GA Emergency Cut-In Valve automatically opens to introduce a supplemental source of water when the downstream pressure falls below a pre-set minimum, typically due to an emergency. This rugged and versatile piston control valve provides superior design, simple operation, and maximum performance in water ...
-
Manufactured by cleanwater1, Inc.based in USA
A pressure drop occurring across the specially designed variable orifice water control valve produces a high velocity water jet. This water jet, traveling at approximately 70 ft. per second, is aimed directly at, and impinges on, the polymer as it enters the mixingchamber. At this point, the only point where high ...
-
Manufactured by cleanwater1, Inc.based in USA
Knowing the facts behind polymer blending is the first step in understanding the numerous benefits of the dynaBLEND™ technology. Over the years, the spectrum of polymers available has widened and today there are more difficult-to-blend polymers than ever before. This is especially important because some polymer blending systems work well on simple-to-blend polymers, but fail at effectively ...
-
Manufactured by RWCbased in USA
Incorporating our industry-leading brands, RMC Water Valves and CashAcme, Reliance Valves give you precise control over the delivery of water through a robust range of potable and non-potable plumbing products. We specialise in water pressure, temperature and thermostatic mixing ...
-
Manufactured by Marlo, Inc.based in USA
The Marlo 'MRG' Series is the corrosion resistant alternative to the 'MR' Series. These softeners are equipped with FRP resin tanks and Sch 80 PVC exterior piping and valves. All 'MRG' systems are factory skid mounted, pre-piped, pre-wired. Standard designs available for twin and triple tank ...
-
Manufactured by Baelz North Americabased in USA
In light of rising energy costs, saving electrical energy through energy-efficient equipment and installations has become increasingly important. Where heating water would usually be distributed to secondary circuits using a control valve and a pump for each circuit, Baelz uses controlled ejector technology. This equipment offers ...
-
Distributed by Jim House and Associates, Inc.based in USA
-General - Package- unit blower systems/air-water control valves/chlorine cylinder safety valves/sluice gates/structure ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
A low energy wet scrubber is a simple versatile air pollution control device that controls gaseous emissions through contact between the exhaust gases and injected water. Within the scrubber hot flue gases are rapidly cooled by atomised water in-jected at pressure through one or more spray nozzles. Dust particles (particulates) ...
-
Manufactured by Echo Incorporatedbased in USA
73.5 cc professional-grade, 2-stroke ...
-
Manufactured by Evapco Inc.based in USA
The Evapcold LCR-P product line is based on a penthouse configuration and includes 250 models that have an ammonia charge ranging from 2 to 6 lbs. per TR (actual charge amount dependent on the model size). The LCR-P is specifically designed to be roof mounted on the refrigerated space. Penthouse units are available with Pumped Recirculated Liquid (PRL) ammonia evaporators for low and medium ...
-
Manufactured by International Dioxide Inc a division of ERCO Worldwidebased in USA
lbs. to 30 lbs. of chlorine dioxide daily without the need for any electrical hookups and at a price that is unmatched in the industry. The educator-based generator is activated and deactivated by the presence of water flow. The ADOX MiniAC is certified by NSF under standard ...
-
Manufactured by Sellers Manufacturing Companybased in USA
Sellers Manufacturing 3400 series offers industry leading reliability and durability with its Pressurized Series of deaerators. Designed to increase the longevity of boiler piping systems by reducing O2 and CO2 content in boiler water, Seller’s pressurized deaerators can reduce the level of these dissolved gases below 0.005 cc’s ...
-
Manufactured by Sellers Manufacturing Companybased in USA
Sellers Engineering offers industry leading reliability and durability with its Atmospheric Series of deaerators. Designed to increase the longevity of boiler piping systems by reducing O2 and CO2 content in boiler water, Seller’s pressurized deaerators can reduce the level of these dissolved gases below 0.003 cc’s per liter. ...
-
Manufactured by Smart Structures Internationalbased in USA
Bottom cleanliness of drilled shaft foundations has been proven, through load testing, to directly influence end bearing performance. Further research shows that displaced bottom sediment also reduces side shear in the bottom 1 to 2 shaft diameters. Good bottom cleaning methods such as airlifting and submersible pumps will significantly increase end bearing reliability. SID Smart Shaft ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you