wave measurement equipment in New Jersey

  • DigiPol - Model 407A41 - Polariscope

    The MODEL 407A41 is equipped for a 200mm (8 inch) field of view. Designed for convenient Qualitative analysis of stress fringes with a sensitive plate the system uses an economical light source. The system can be equipped with an optional Measurement Head and also a Digital Camera to create a permanent record. The optional 407M41/M51A measurement ...

    By DigiPol Technologies (formerly Rudolph Instruments) based in Denville, NEW JERSEY (USA). from Polariscope Product line

  • DigiPol - Model 405A41 - Polariscope

    The Model 405A41 is equipped for a 100mm (4 Inch field of view). Designed for convenient Qualitative analysis of stress fringes with a sensitive plate the system uses an economical incandescent light source. The system can be equipped with an optional Measurement Head   407M41  this also permits quantitative stress analysis using ...

    By DigiPol Technologies (formerly Rudolph Instruments) based in Denville, NEW JERSEY (USA). from Polariscope Product line

  • Premium

    Teledyne Isco - Model 2150 - Area Velocity Flow Module

    The 2150 Flow Module uses continuous wave Doppler technology to measure mean velocity. The sensor transmits a continuous ultrasonic wave, then measures the frequency shift of returned echoes reflected by air bubbles or particles in the flow.

    By Teledyne ISCO Distributor in NEW JERSEY (USA). from Area Velocity Flow Module Product line

  • Premium

    Teledyne Isco - Model QC-DT-1 - Hybrid Ultrasonic Flowmeter

    The QC-DT-1 Hybrid Ultrasonic Flow Meters can measure fluid flow in virtually any fluid in which sound waves can travel. The QC-DT-1 meters are considered 'hybrid' because they can measure fluid flow using either the Doppler or Transit Time methods. The QC-DT-1 ultrasonic sound transducers are clamped to the outside of the pipe wall and include no ...

    By Teledyne ISCO Distributor in NEW JERSEY (USA). from Hybrid Ultrasonic Flowmeter Product line

  • Premium

    Teledyne Isco - Model 2110 - Ultrasonic Flow Module

    The 2110 Ultrasonic Module provides accurate noncontact liquid level measurement, using built-in software to calculate flow in weirs, flumes and streams. When used in conjunction with Isco’s Flowlink software, that information can be managed and used in a wide variety of ways. With the 2110, an ultrasonic sensor mounted above the flow stream ...

    By Teledyne ISCO Distributor in NEW JERSEY (USA). from Ultrasonic Flow Module Product line

  • Valeport MIDAS - Model WTR - Wave and Tide Recorder

    The MIDAS WTR Wave Recorder uses the proven Linear Wave Theory wave analysis method of measurement. The MIDAS WTR benefits from Valeport’s latest sensor measurement technology, together with 64 bit data processing, and an improved range of sampling options. Fast data upload, quick change battery carousel and intuitive operating software make ...

    By Valeport Ltd Distributor in Windsor, NEW JERSEY (USA). from Wave and Tide Recorder Product line

  • CNR1 Net Radiometer

    The CNR1 net radiometer is manufactured by Kipp & Zonen for applications requiring research-grade performance. The radiometer measures the energy balance between incoming short-wave and long-wave IR radiation versus surface-reflected short-wave and outgoing long-wave IR radiation. The CNR1 consists of a pyranometer and pyrgeometer pair that ...

    By Campbell Scientific, Inc. Distributor in NEW JERSEY (USA). from CNR1 Net Radiometer Product line

  • NR-LITE-L Kipp and Zonen Net Radiometer

    The NR-LITE is a rugged net radiometer manufactured by Kipp & Zonen. Net radiometers measure the energy balance between incoming short-wave and long-wave IR radiation relative to surface reflected short-wave and outgoing long-wave IR radiation. This net radiometer includes two black conical absorbers; one facing upward, the other facing ...

    By Campbell Scientific, Inc. Distributor in NEW JERSEY (USA). from NR-LITE-L Kipp and Zonen Net Radiometer Product line

  • Model MS - 202 - Pyrgeometer

    The MS - 202 is designed to measure long wave radiations beyond 3µm. A specially coated silicon dome transmits incident radiation which have a wavelength above 3µm by cutting off the shorter wave lengths of the sun spectrum. A radiative compensation circuit with a thermistor is integrated in the MS - 202. This circuit is used for the ...

    By RainWise Inc. Distributor in NEW JERSEY (USA). from Pyrgeometer Product line

  • Model SRC20 Signal Generator

    TheSRC20 is a powerful, value-priced digital signal generator housed in a durable, hand-held package. This lightweight waveform generator is ideally suited for laboratory and field requirements. The SRC20 provides extremely stable, and statistically repeatable source signals used in applications such as reverberation measurements, vibration ...

    By Larson Davis, a division of PCB Piezotronics Distributor in Windsor, NEW JERSEY (USA). from Model SRC20 Signal Generator Product line

  • Model EX100/200 - Electromagnetic Flow Sensors

    The complete lack of moving parts of this insertion electromagnetic flow sensor is the source of its reliability. There is no rotor to stop turning in dirty water and there are no bearings to wear out. A rapidly reversing magnetic field is produced in the lower housing, and as the fluid moves through this field a voltage is generated. This tiny ...

    By Global Water Instrumentation, Inc. - a Xylem brand Distributor in NEW JERSEY (USA). from Electromagnetic Flow Sensors Product line

  • VIG Industries - Model 300/2 - Dual Non-Dispersive Infrared Gas NDIR Analyzer

    The VIG Industries, Inc. Model 300/2 is designed to measure a two gasses (or three with oxygen option). The Model 300/2 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving ...

    By VIG Industries Distributor in Windsor, NEW JERSEY (USA). from Dual Non-Dispersive Infrared Gas NDIR Analyzer Product line

  • Young - Model 05103 - Wind Monitor

    The Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal. The wind direction sensor is a rugged yet lightweight vane. Vane angle is ...

    By R.M. Young Company Distributor in NEW JERSEY (USA). from Wind Monitor Product line

  • VIG Industries - Model 300 - Single Gas Non-Dispersive Infrared NDIR Analyzer

    The VIG Industries, Inc. Model 300 is designed to measure a single gas (or two with oxygen option). The Model 300 optical bench consists of the IR source, sample cell, and patent pending detector. The source control circuit provides a controlled current square wave to the infrared source. No mechanical chopper is used so there are no moving parts ...

    By VIG Industries Distributor in Windsor, NEW JERSEY (USA). from Single Gas Non-Dispersive Infrared NDIR Analyzer Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you