Wear Protection Equipment Near Indiana
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The Krauss-Maffei VZU-G gypsum centrifuge is most suitable for desulfurization of flue gases from coal-fired heat/ power plants, waste incinerators, and copper smelters. Washing the flue gas with limestone slurry is the most successful method and generates reusable ...
-
Manufactured by Trucentbased in USA
Get Results With Your Industrial Fluids. The DX-1010 is designed to efficiently remove solids, insoluble contaminants, and tramp oil from water-based fluids, as well as water and solids from straight oils. The unit produces a very high peripheral centrifugal force for the removal of fine particles (0.1 to 50 microns) and the efficient separation of two immiscible liquids (e.g. tramp oil from ...
-
Manufactured by Trucentbased in USA
Get Results With Your Industrial Fluids. The DX-1020 is designed to efficiently remove solids, insoluble contaminants, and tramp oil from water-based fluids, as well as water and solids from straight oils. The unit produces a very high peripheral centrifugal force for the removal of fine particles (0.1 to 50 microns) and the efficient separation of two immiscible liquids (e.g. tramp oil from ...
-
Manufactured by Trucentbased in USA
crystalline phosphates, which prevents galling and provides excellent wear protection. Oil treatment is commonly employed as a post treatment process. Manganese phosphate coatings are widely used on metals designed for automotive and defense industry use. Having a lower coating weight than heavier zinc phosphate coatings, manganese phosphate coatings ...
-
Manufactured by Trucentbased in USA
Get Results With Your Industrial Fluids. The DX-905 is designed to efficiently remove solids, insoluble contaminants, and tramp oil from water-based fluids, as well as water and solids from straight oils. The unit produces a very high peripheral centrifugal force for the removal of fine particles (0.1 to 50 microns) and the efficient separation of two immiscible liquids (e.g. tramp oil from ...
-
Manufactured by Trucentbased in USA
The DX-1040 is designed to efficiently remove solids, insoluble contaminants, and tramp oil from water-based fluids, as well as water and solids from straight oils. The unit produces a very high peripheral centrifugal force for the removal of fine particles (O.lto 50 microns) and the efficient separation of two immiscible liquids (e.g. tramp oil from water-based metalworking fluids). Modules are ...
-
Manufactured by Trucentbased in USA
of insoluble crystalline phosphates, which prevents galling and provides excellent wear protection. For paint and powder coatings, a phosphate coating has two main functions. First, the coating provides improved paint and powder coating adhesion since the phosphate crystals act as an organic coating anchoring site. Second, the phosphate layer ...
-
Manufactured by Moleculoc, LLCbased in USA
BioLoc tm is a purpose built specialty absorbent product that utilizes standard Moleculoc as a base ingredient for its formulation. This gives BioLoc all of the superior absorptive qualities as its parent product, while inclusions of certain other natural and inert minerals enhances those abilities and allows BioLoc to provide some very distinct advantages over other types of bio-hazardous clean ...
-
Manufactured by Intimus International GmbHbased in GERMANY
a cost-efficient and safe solution with top performance. All operating functions are controlled electronically via SPS after the start switch has been activated. Disintegration of material to be shredded through wear and tear protected cutting cylinders made of hardened steel. Service friendly cutting cylinders that consist of changeable cutting ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
KALFLEX wear resistant flexible pipe systems provide a cost effective solution for connecting conveying system components that move due to vibration, thermal expansion, or as a result of intended movement. The flexible system can be easily integrated into existing pipe systems using normal flanging and works well in pneumatic conveying ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
KALCOR cast zirconium corundum is a combination of alumina, zirconia and silica that is melted at 3,600°F and then cast in tiles of various types, cylinders, and custom designed shapes for wear protection. The pre-engineered, cast linings withstand extreme abrasion and moderate impact and have a low thermal ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
KERAFLEX wear protection systems are a combination of KALOCER High Alumina Ceramics or KALMETALL-W hard overlay welded plates vulcanized onto rubber mats for a wear resistant surface. Mechanically attached to a steel structure using studs or bolts, the composite lining has a maximum application temperature of 80°C ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
KALCRET hard compound is the general term for cement bonded wear protection materials. These are based on inorganic materials of high strength and good wear resistance. The specific density is attained by a well balanced particle size distribution of the individual components. The pores between the cement portions are filled by the ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
ABRESIST fused cast basalt linings are a mineral based, wear resistant material that protects material handling and processing components conveying abrasive materials. The pre-engineered ABRESIST abrasion resistant linings and tiles are produced by melting volcanic rock, then casting into shaped tiles or cylinders, and annealing at ...
-
Manufactured by Kalenborn Abresist Corporationbased in USA
The demands on wear protection materials continues to evolve as are adapted to specific application conditions. KALCOR-S material has been engineered for good abrasion resistance and high temperature resistance up to 1,250°C / 2,282°F. It is produced by cold forming aluminum oxide and zirconium oxide raw materials into tiles, ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
-precision custom components, even for complex geometries, are used as wear-protection fittings in pumps, fans or hydraulic ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
ABRESIST fused cast basalt has proven extremely effective as a protective lining in straight pipe elements and in pipe bends. Installed pipe cylinders reduce wear significantly in both pneumatic and hydraulic conveyor ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
KALOCER pipes and pipe bends are lined with thin pipe cylinders made of special oxide ceramic and designed to withstand extreme wear and/or temperature stresses. The durably smooth surfaces promote flowability and prevent moist material from forming blockages. Its corrosion resistance ensures that KALOCER pipes and pipe ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
Wear-proof KALCOR pipe systems are extremely abrasion-resistant, withstand service temperatures up to +400 °C, and also provide good resistance to temperature changes. The cast pipe cylinders are made of zirconium corundum with wall thickness as thin as 12 mm. Kalenborn also manufactures lined pipe bends from cast parts, thereby ...
-
Manufactured by Kalenborn Kalprotect GmbH & Co. KGbased in GERMANY
KALOCER is an oxide ceramic material composed of more than 90% aluminium oxide. It is manufactured as plates, specially shaped components and cylinders. KALOCER is suitable for plant components subject to extreme amounts of abrasive wear. Linings from as little as 1.5 mm thick even open up the possibility of use in highly constricted ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you