Weir Equipment Available In Alabama
-
ShowcaseManufactured by Skim-pakbased in USA
skim-pak series 600 is designed to remove floating contaminants including oils, foams and particulates from limited access and smaller skimming ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 2000 skimmers are rugged, compact and portable for operation in sumps, tanks and pits, and separators. Capable of fitting through a 24” access, the Series 2000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. All of this results in a greater recovery of oil with less water and higher overall recovery rate with associated lower ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
The new electronic NDW 2 inclinometer utilises a modern measurement method based on MEMS technology for gravitational inclination measurement (rotational angle ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 11800 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 11800 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 18500 skimmers are high volume, wave tolerant skimmers for use in tanks, ponds, harbors, wastewater clarifiers and with vacuum trucks. For complete clean-up and recovery systems, skim-pak skimmers can be combined with tested ...
-
PremiumManufactured by Skim-pakbased in USA
The skim-pak series 4000 skimmers are rugged, compact and portable for operation in tanks, lagoons, ponds, lakes, rivers and harbors. Capable of fitting through any 24” access, the Series 4000 skimmers utilize a unique self adjusting flow control eliminating manual adjustments. This unique flow control will recover more oil and less water, resulting in higher overall recovery rates and ...
-
Manufactured by KWT Group/ KWT International member of Bergschenhoek Groepbased in NETHERLANDS
KWT weirs are available in various forms and are mainly used in surface and process water systems. The KKS-PE tilting weir provides a very accurate means of controlling water levels upstream, and is a very cost-effective solution for smaller applications. Using a plastic tilting weir is often a cost-effective solution. The side pieces of the ...
-
Manufactured by Dynamic Water Control Gates Inc.based in CANADA
Weir Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted ...
-
Manufactured by MegaSecur Inc.based in CANADA
The weir, also known as a spillway or transition duct is entirely made of unbreakable polyethylene. They are installed on top of the water barrier and allow you to manage the water surplus downstream while creating a dry area. This system replaces a high flow pump and removes up 90 liters/second (1200 Imperial gallons or 1440 US gallons per ...
-
Manufactured by Parker Systems, Inc. (PSI)based in USA
Weir-type skimmers are light weight and compact, easily deployed and operated by one person. The weir automatically adjusts to the pump rate continually maintaining a skim. Weir skimmers can be set up for unattended operation or fitted with an operator control accessory ...
-
Manufactured by SISMAT ULUSLARARASI LTD. STI.based in TURKEY
Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open ...
-
Manufactured by Egersund Markleenbased in NORWAY
Foilex Mini and Micro Skimmers (30 and 15 m3/h respectively) are robust and versatile units which provide a quick response to low and medium viscosity oil spills. They combine with any kind of suction pump and due to their low draft they are ideal for use in shallow waters. The Foilex TDS range of skimmers are hydraulically powered and incorporate the patented Foilex "Twin Disc Screw" pumps. ...
-
Manufactured by Fontaine-Aquanox Water Control Gatesbased in CANADA
The Fontaine-Aquanox SERIES 40 weir gate is used to control flows and level in different applications by opening downwards and allowing water flow over the stainless steel plate. The SERIES 40 sealing system design is similar to that of the SERIES ...
-
Manufactured by Manitex Sabre Incbased in USA
430 Barrel Steel. Open Top. Integrated ...
-
Manufactured by Potential Engineeringbased in INDIA
Weir gate is used to control and regulate of fluids associated with water, waste water, sewage treatment plants, power generation, irrigation schemes and process plants. Sizes range from 150mm to 2000mm. It can be made in Circular, Rectangular or Square section. Selection of the correct Weir gate to suit the duty is important to satisfy the ...
-
Manufactured by Vooner FloGard Corporationbased in USA
A weir tank is a water collection tank for vacuum boxes. The tank has a V-notch with labels that shows the flow existing the tank. The V-notch has been used for thousands of years to measures flow and work perfectly for “white water” since there no parts to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you