Only show results in Virginia? Ok

Weir Control equipment

  • Premium

    ENTA - Adjustable Weirs

    Adjustable weirs are mostly utilized for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Water Flow Control Devices Product line

  • Premium

    Grande - Model TRU-BEND - Overflow Bending Weir System

    The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Premium

    Grande - Model ACU-BEND - Bending Weir System

    The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Weir - Choke Valves

    A choke valve that is used for control of high pressure well fluids. The Blakeborough range of Choke Valves, BV992/3, will meet the requirements of choke applications in oil production, gas injection, and sea water injection applications where pressure drops of up to 500bar are common.The choke valve is designed and manufactured to meet the ...

    By The Weir Group PLC based in Glasgow, UNITED KINGDOM. from Control & Choke Valves Product line

  • Premium

    ASTIM - Adjustable Over Flow Weirs

    Adjustable over flow weirs are used for wide openings where the vertical travel required is not more than about 500 mm. The gate is hinged at the bottom, and is raised and lowered by means of a centrally mounted spindle which can be operated either manually, or by an actuator. As friction is very low, operating effort for tilting weirs is minimal.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Water Flow Control Equipment Product line

  • Premium

    Grande - Model SURE-BEND - Hydraulically Operated Bending Weir System

    The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Rotary Weir

    Size: 1000 x 150 mm up to 3500 x 1000 mm, sealing to 4 sides. For mounting with chemical anchor bolts and concrete

    By BÜSCH Technology GmbH based in Nürnberg, GERMANY. from Weirs Product line

  • Suntree - Model Weir Guard™ - Filter for Overflow Control Structures

    A screened filter for overflow control structures on wet or dry detention or retention. The unique shape allows for falling rain to backflush the screens which dramatically reduces the need for maintenance. Made from marine grade fiberglass and stainless steel, the Weir Guard is built strong to last and comes with a 5 year warranty.

    By Suntree Technologies, Inc. based in Cocoa, FLORIDA (USA). from Other Products Product line

  • Weir Control & Choke Valves - Model BV500 / 501 - Low Pressure Process Control Valve

    The BV500 / 501 cage trim series of control valves are designed to meet the requirements of most process control applications. The valves incorporate high integrity features with a wide range of standard and high-duty trims available.

    By The Weir Group PLC based in Glasgow, UNITED KINGDOM. from Control & Choke Valves Product line

  • Premium

    Chemtex - Skim-pak weir-type Skimmers

    Skim-pak weir-type Skimmers are simply the best skimmers money can buy. Skim-paks are lightweight and compact, easily deployed and operated by one person. The weir automatically adjusts to the pump rate, continually maintaining a skim. Skim-pak skimmers can be set up for unattended operation or fitted with an operator control accessory package. ...

    By Chemtex, Inc. based in Cumberland, RHODE ISLAND (USA). from Marine Spill Response - Skimmers Product line

  • Weirs

    Weirs are the workhorse of any treatment plant.  By definition, they control the overflow rate of water through the hydraulic profile.  JC-Fabrications can provide weirs to meet almost any specification, from V-notch weirs to sharp-crested and flat top weirs, in standard 12' lengths or custom lengths up to 20'.  Our weirs are ...

    By JC-Fabrications, LLC based in Boca Raton, FLORIDA (USA).

  • Tilting - Model KKS-HDPE - Weir

    KWT weirs are available in various forms and are mainly used in surface and process water systems. The KKS-PE tilting weir provides a very accurate means of controlling water levels upstream, and is a very cost-effective solution for smaller applications. Using a plastic tilting weir is often a cost-effective solution. The side pieces of the weir ...

    By KWT Group/ KWT International based in Biddinghuizen, NETHERLANDS. from Tilting Weir Product line

  • Model KKS - Stainless Steel Weir

    KWT weirs are available in various forms and are mainly used in surface and process water systems. The KKS tilting weir provides a very accurate means of controlling water levels upstream. The tilting weir can be supplied in various sizes and models for water level maintenance and flood control. The weir is either manually or actuator driven; ...

    By KWT Group/ KWT International based in Biddinghuizen, NETHERLANDS. from Tilting Weir Product line

  • Model GH 60 & GH-66 - Aluminum & Stainless Steel Weir Gates

    Golden Harvest Inc. Weir Gates are designed to control upstream water elevation and can provide a rough estimate of flow using notched gates via the downward- opening design. Weir gates function like slide gates, except that the disc opens downward allowing outflow to weir over the top of the gate.

    By Golden Harvest, Inc. based in Burlington, WASHINGTON (USA). from Weir Gates Product line

  • Model 21 - Weir Gates

    Weir Gates With Elastomer EPDM Seals. Dimensions  Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted Aluminum

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Weir Gates Product line

  • Model 20 - Weir Gate

    Weir Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted Aluminum

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Weir Gates Product line

  • Premium

    Grande - Model ACU-PRO - Overflow Measuring Profile System

    The ACU-PRO Overflow Measuring Profile System is designed to improve a weir’s hydraulic capacity and to accurately measure its overflow discharges. The ACU-PRO’s unique and extensively tested design utilizes the upstream and downstream water levels in conjunction with the flow curve to accurately monitor and record the overflow ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Control Product line

  • Model 25 - Weir Gate

    Weir Gates (Measurement Type) With Elastomer Seals. Dimensions Overall gate width up to 3048 mm or 120'.  Materials Stainless steel (304 or 316) Galvanized or painted Aluminum

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Weir Gates Product line

  • ACE KOAS - Weir Penstocks

    ACE KOAS Weir Penstocks are available in a number of forms, tailored to your requirements. The penstocks are manufactured in Stainless Steel 316L, making them lightweight for ease of handling and installation, without compromising strength.

    By Aquatic Control Engineering Ltd. based in Rampton, UNITED KINGDOM. from Bespoke Flow Control Product line

  • HydroBend - Weir Gates

    According to ATV A128 [Wastewater Technology Association], rainwater overflow basins and retaining canals are to be furnished with spillway dams. In the event of strong rainfall they divert excess water into the surrounding bodies of water. The upper edge of the spillway dam is the maximum storage level with which the chargeable storage volume is ...

    By Steinhardt GmbH Wassertechnik based in Taunusstein, GERMANY. from Water Level Control Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you