Only show results in Virginia? Ok

weir flow equipment

  • Showcase

    Grande - Model TRU-BEND - Overflow Bending Weir System

    The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Bending Weir System Product line

  • Premium

    ANDRITZ TurboJet - Weir Plates

    ANDRITZ SEPARATION developed a next-generation weir plate - TurboJet - which drastically reduces a centrifuge’s absorbed power up to 30%. The patented TurboJet weir plate guides the liquid discharge from the centrifuge in the opposite direction to the bowl rotation. Adjustable nozzles form a jet similar to a jet engine’s exhaust. This ...

    By ANDRITZ Separation - ANDRITZ Group based in Graz, AUSTRIA. from Weir Plates Product line

  • Premium

    ASTIM - Adjustable Over Flow Weirs

    Adjustable over flow weirs are used for wide openings where the vertical travel required is not more than about 500 mm. The gate is hinged at the bottom, and is raised and lowered by means of a centrally mounted spindle which can be operated either manually, or by an actuator. As friction is very low, operating effort for tilting weirs is minimal.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Adjustable Over Flow Weirs Product line

  • Premium

    Grande - Model ACU-BEND - Bending Weir System

    The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Bending Weir System Product line

  • Weir - Choke Valves

    A choke valve that is used for control of high pressure well fluids. The Blakeborough range of Choke Valves, BV992/3, will meet the requirements of choke applications in oil production, gas injection, and sea water injection applications where pressure drops of up to 500bar are common.The choke valve is designed and manufactured to meet the ...

    By The Weir Group PLC based in Glasgow, UNITED KINGDOM. from Choke Valves Product line

  • Premium

    Grande - Model SURE-BEND - Hydraulically Operated Bending Weir System

    The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Hydraulically Operated Bending Weir System Product line

  • Premium

    Teledyne Isco - Model 2110 - Ultrasonic Flow Module

    The 2110 Ultrasonic Module provides accurate noncontact liquid level measurement, using built-in software to calculate flow in weirs, flumes and streams. When used in conjunction with Isco’s Flowlink software, that information can be managed and used in a wide variety of ways. With the 2110, an ultrasonic sensor mounted above the flow stream ...

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Ultrasonic Flow Module Product line

  • Premium

    ENTA - Model IFD - Internal Flow Drum Screens

    Internal flow drum screens (IFD) which are produced for screening of the solids prone to settling, are in the group of fine screens. IFD; is a drum made of perforated metal sheet or mesh screen wire and consists of a bearing system, water distribution weir and water spray mechanism. By its fully closed structure, some problems like odor, spring ...

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Internal Flow Drum Screens Product line

  • Premium

    Teledyne Isco - Model 710 - Ultrasonic Flow Module

    Plug in a 710 Flow Module and turn your 6700 Series or Avalanche Sampler into a combination sampler and flow meter. The Ultrasonic sensor is mounted above the flow stream, and it transmits a sound pulse that is reflected by the surface of the flow stream. The elapsed time between pulse and echo determines the level of liquid in the channel. The ...

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Ultrasonic Flow Module Product line

  • Premium

    Teledyne Isco - Model 730 - Bubbler Flow Module

    Isco 730 Bubbler Flow Modules use an internal air compressor to force a metered amount of air through a bubble line submerged in the flow channel. By measuring the pressure needed to force air bubbles out of the line, the water level is accurately determined. The 6712 Sampler then converts this level into flow rate.

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Bubbler Flow Module Product line

  • Premium

    Teledyne Isco - Model 3010 - Ultrasonic Flow Transmitter

    The 3010 is AC powered for permanent installation. It has no internal data storage, but provides 4-20 mA analog and RS-232 serial outputs, as well as relay switches and pulsed DC totalizer outputs for flexible interfacing and control. The ultrasonic level sensor is mounted above the flow stream and transmits a sound pulse that is reflected from ...

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Ultrasonic Flow Transmitter Product line

  • Premium

    Ovivo Jones+Attwood - Screw Classifier

    The J+A screw classifier systems are free-standing units used for the separation of mineral grit from other types of solids. The screw classifier hopper maintains a water level through a series of weirs. A peripheral weir removes floating solids and a second weir positioned within the trough wall removes other solids that are lighter than grit. A ...

    By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Screw Classifier Product line

  • Premium

    Prosonic - Model FDU92 - Ultrasonic Sensor for Level and Flow Measurement

    Ultrasonic sensor for level and flow measurement for connection to FMU9x (measuring range up to 20m). The FDU92 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is ...

    By Endress Hauser AG based in Reinach, SWITZERLAND. from Ultrasonic Sensor for Level and Flow Measurement Product line

  • Volumetric Weirs

    For measuring flows in Manholes and Open End Pipes.

    By Parson Environmental Products, Inc. based in Wernersville, PENNSYLVANIA (USA).

  • Premium

    Model FDU93 - Prosonic Ultrasonic Sensor for Level and Flow Measurement

    Ultrasonic sensor for level and flow measurement for connection to FMU9x (measuring range up to 25m). The FDU93 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is ...

    By Endress Hauser AG based in Reinach, SWITZERLAND. from Prosonic Ultrasonic Sensor for Level and Flow Measurement Product line

  • Finger Weirs

    FRP weir pans manufactured by Warminster Fiberglass are used in municipal and industrial water and wastewater plants worldwide. They are used in clarifiers, settling tanks and other applications where flow rates cannot be met with peripheral mounted weir plates. Flow rates up to 4½ times the flow of simple peripheral mounted weirs can be ...

    By Warminster Fiberglass Company based in Southampton, PENNSYLVANIA (USA).

  • Premium

    Teledyne Isco - Flow-Through Sample Chamber

    The Teledyne ISCO high temperature flow-through chamber makes 'dipper' type samplers obsolete, and is ideal for large treatment plants with multiple sampling points spread over a large area. This device allows you to eliminate time-consuming trips to retrieve samples from remote monitoring points. By installing flow-through chambers on transfer ...

    By Teledyne ISCO based in Lincoln, NEBRASKA (USA). from Flow-Through Sample Chamber Product line

  • Model Series 40 - Weir Gate

    The Fontaine Series 40 Downward Opening Weir Gate is designed for applications where water flows over the slide for level or flow control applications. The Series 40 features a flange back made of stainless steel with a reinforced slide, and is solidly built in one piece for easy installation.

    By FONTAINE-AQUANOX based in Sherbrooke, QUEBEC (CANADA). from Weir Gate Product line

  • Coldwell-Wilcox - Weir Gates

    Weir gates are used to control water flow in different applications by opening downward and holding an elevation of water column or metering water flow by allowing flow over the stainless steel or aluminum disc. Weir gates can be self-contained or conventional in construction and surface mount or embedded type. A weir gate is a downward opening ...

    By Coldwell-Wilcox Technologies, LLC based in Cincinnati, OHIO (USA). from Weir Gates Product line

  • Weir Skimmer

    The Flow Weir skimmer operates on the weir principle with design features that make it an efficient, maintenance free, low cost unit. A lightweight design for deployment and operation by one man. The Flow Weir skimmer is ideal for a mobile emergency response unit or as a permanently deployed unit. The three floats are fitted on collapsible arms ...

    By Cowens Ltd based in Carlisle, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you