Only show results in Virginia? Ok

weir opening equipment

  • Showcase

    Grande - Model TRU-BEND - Overflow Bending Weir System

    The TRU-BEND Overflow Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The TRU-BEND’s unique and extensively tested design operates ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Overflow Bending Weir System Product line

  • Premium

    ENTA - Adjustable Weirs

    Adjustable weirs are mostly utilized for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

    By ENTA Treatment Systems Engineering Contracting LTD based in Seyrantepe-Sarıyer, TURKEY. from Adjustable Weirs Product line

  • Model AD - Floating Weir Permanently Open Pump Discharge System

    Discharges subsurface laminar layer of clean water without disturbing the sludge blanket or floatables. Gravity and pump options are available with mechanical actuation to close the weir during aeration and mixing phases preventing wastewater or activated sludge entering the discharge pipe.

    By Aquaturbo Systems, Inc. based in Springdale, ARIZONA (USA). from Floating Weir Permanently Open Pump Discharge System Product line

  • Premium

    Grande - Model ACU-BEND - Bending Weir System

    The ACU-BEND Bending Weir System is designed to maintain maximum water levels upstream of the weir, thus allowing full usage of all the available upstream storage volume, while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The ACU-BEND’s unique, patented and extensively tested design ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Bending Weir System Product line

  • Premium

    ASTIM - Adjustable Over Flow Weirs

    Adjustable over flow weirs are used for wide openings where the vertical travel required is not more than about 500 mm. The gate is hinged at the bottom, and is raised and lowered by means of a centrally mounted spindle which can be operated either manually, or by an actuator. As friction is very low, operating effort for tilting weirs is minimal.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Adjustable Over Flow Weirs Product line

  • Premium

    Grande - Model SURE-BEND - Hydraulically Operated Bending Weir System

    The SURE-BEND Hydraulically Operated Bending Weir System is designed to maintain maximum water levels upstream of the weir thus allowing full usage of all the available upstream storage volume while not adversely affecting the overflow weir capacity in Combined Sewer Overflow (CSO) applications. The SURE-BEND’s unique and extensively tested ...

    By Grande Water Management Systems based in Laval, QUEBEC (CANADA). from Hydraulically Operated Bending Weir System Product line

  • Downward Opening Weir Gate

    The function of a down-opening weir gate is to control the upstream water level, and/or pace the amount of discharge from a water system. At times there will be a level control sensor in the system which is directly connected - controlling a modulating electric operator to automatically pace the amount of flow discharged and/or maintain a constant ...

    By Plasti-Fab, Inc. based in Tualatin, OREGON (USA). from Downward Opening Weir Gate Product line

  • Volumetric Weirs

    For measuring flows in Manholes and Open End Pipes.

    By Parson Environmental Products, Inc. based in Wernersville, PENNSYLVANIA (USA).

  • Weir Tank

    430 Barrel Steel. Open Top. Integrated Walkway.

    By Manitex Sabre Inc based in Knox, INDIANA (USA). from Weir Tank Product line

  • Adjustable Weir

    Adjustable weirs are mostly utilised for level control. The main feature that sets them apart from sluice gates is that they allow partial opening control. Furthermore, they may be opened downwards or in angles, as the main purpose is controlling the water level, as opposed to sluices gates that usually open upwards.

    By SISMAT ULUSLARARASI LTD. STI. based in KOCAELI, TURKEY. from Adjustable Weir Product line

  • WACO - Weir Gates

    For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

    By WACO Products, Inc. based in Baltimore, MARYLAND (USA). from Weir Gates Product line

  • Weir Gates

    Weir gates are used in many water treatment plants to control/maintain the water level on one side of the gate. Weir gates are also referred to as downward opening slide gates as the slide is moved downwards to allow the flow of water over the top of the slide (weir plate).

    By Waterman Industries of Egypt based in Cairo, EGYPT.

  • Coldwell-Wilcox - Weir Gates

    Weir gates are used to control water flow in different applications by opening downward and holding an elevation of water column or metering water flow by allowing flow over the stainless steel or aluminum disc. Weir gates can be self-contained or conventional in construction and surface mount or embedded type. A weir gate is a downward opening ...

    By Coldwell-Wilcox Technologies, LLC based in Cincinnati, OHIO (USA). from Weir Gates Product line

  • Model Series 40 - Weir Gate

    The Fontaine Series 40 Downward Opening Weir Gate is designed for applications where water flows over the slide for level or flow control applications. The Series 40 features a flange back made of stainless steel with a reinforced slide, and is solidly built in one piece for easy installation.

    By FONTAINE-AQUANOX based in Sherbrooke, QUEBEC (CANADA). from Weir Gate Product line

  • Model 20 - Weir Gate

    Weir Gates With Elastomer EPDM Seals. Dimensions Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted Aluminum

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Weir Gate Product line

  • Model 21 - Weir Gates

    Weir Gates With Elastomer EPDM Seals. Dimensions  Square or rectangular openings up to 3048 mm or 120'. Materials Stainless steel (304 or 316) Galvanized or painted Aluminum

    By Dynamic Water Control Gates Inc. based in Pointe-Claire, QUEBEC (CANADA). from Weir Gates Product line

  • Weir-Wolf - Automated Brush System

    The Weir-Wolf automated brush system is designed to clean the weirs, baffles, effluent spillways and launders of water and wastewater clarifiers and thickeners. The Weir-Wolf weir cleaning systems are designed to attach to the skimmer arms of these tanks without adding any additional strain, torque nor energy consumption to drive motors of the ...

    By Ford Hall Company, Inc based in Richmond, KENTUCKY (USA).

  • Dragonfly - Weir Skimmer

    The Dragonfly is a floating weir skimmer. It is designed primarily for use for the recovery of a range of floating pollutants in closed tank applications because there are no moving parts. The Dragonfly can also be used in open environments but is not as efficient as the Vikoma T-Disc range. The unit is supplied with the skimmer head only but ...

    By Vikoma International Limited based in East Cowes, UNITED KINGDOM. from Weir Skimmer Product line

  • Weir Manholes

    While the range of flumes offered by Openchanneflow is extensive, there are times when a weir is a better fit for a buried pipe flow application.  Until now the question was how best accurately install a weir in a below grade application.  Openchanneflow has introduced a line of packaged fiberglass Weir Manholes to solve this problem. ...

    By Openchannelflow based in Atlanta, GEORGIA (US) (USA). from Weir Manholes Product line

  • Hydrobend - Model GNA CSO - Bending Weir

    The GNA CSO HYDROBEND bending weir is designed to have the same flow capacity as a standard overflow weir operating under the same maximum design head and weir length, but is designed so that overflow will only occur when the maximum design water level is reached.

    By Gabriel Novac & Associates Inc. based in Champlain, NEW YORK (USA). from Bending Weir Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you