Only show results in Virginia? Ok

weir wall equipment

  • Premium

    NivuMaster - Transmitter for Level Measurement Using Ultrasonic Sensors

    The NivuMaster series transmitters supply connected P-Series sensors, process measurement values and indicate readings. NivuMaster transmitters are ideally suitable for simple control tasks in level measurement applications. Flow measurements in open channel using a Venturi flume or Q/h-relations, on any kind of weir or discharge sills are ...

    By NIVUS GmbH based in Eppingen, GERMANY. from Transmitter for Level Measurement Using Ultrasonic Sensors Product line

  • Canoe Booms

    Our Canoe Boom design was developed following trials with coaching staff from the British Canoe Union. They are installed upstream of hazards (weirs, sluices, spillways, intakes, flood channels etc) to restrain canoes, kayaks, dinghies and other light craft. These Canoe Booms can be orientated to allow experienced canoeists to pass while ...

    By Bolina Ltd. based in Topsham, UNITED KINGDOM. from Canoe Booms Product line

  • Ovivo Jones+Attwood - Screw Classifier

    The J+A screw classifier systems are free-standing units used for the separation of mineral grit from other types of solids. The screw classifier hopper maintains a water level through a series of weirs. A peripheral weir removes floating solids and a second weir positioned within the trough wall removes other solids that are lighter than grit. A ...

    By Ovivo (Formerly Eimco Water Technologies) based in Salt Lake City, UTAH (USA). from Screw Classifier Product line

  • Algae Control Launder Covers

    Warminster Fiberglass Company Algae/Launder Covers totally eliminate the growth of algae in secondary clarifiers. Our covers offer total unobstructed access for inspection and cleaning of the troughs, weirs, the space between the weirs and scum baffles, as the covers open outboard toward the tank wall. The operator can walk around the trough ...

    By Warminster Fiberglass Company based in Southampton, PENNSYLVANIA (USA).

  • Skim-pak - Flow - Controlled and Floating Decanter Systems

    The Cross section of the decanter above shows the side wall of the decanter; the weir with the locking rod attached to the top lip; trap door and foam barrier. In the first picture above on the left the decanter is shown as if to be floating with the out side and inside water level being the same. The level out side would be 2” down the foam ...

    By Skim-pak based in Monterey, CALIFORNIA (USA). from Flow - Controlled and Floating Decanter Systems Product line

  • IBS - Stoplogs

    IBS stoplogs are ideal for use when a conventional penstock is excessive in design and cost. They can be used temporarily for diverting flows whilst carrying out maintenance or for creating a weir wall. Stoplogs, like penstocks, are used in a wide variety of installations including water and wastewater treatment plants, power stations, flood ...

    By IBS Engineered Products Ltd based in Doncaster, UNITED KINGDOM. from Stoplogs Product line

  • Mud Tanks

    Trilliant's 200, 300, & 400bbl Mud Tanks, are designed and built for multiple uses; the tanks can be used to mix drilling fluids and/or store them. These tanks can also be used as flow back tanks and as flocculent tanks. The tanks have three compartments and each wall has a one foot weir for skimming abilities if needed.

    By Trilliant Oilfield Services, LLC. based in Casper, WYOMING (USA).

  • AHS - Gabions and Revet Mattresses Wire Mesh

    Gabions: a double-twisted wire mesh container of variable sizes, uniformly partitioned into internal cells, interconnected with other similar units, and filled with stone at the project site to form flexible, permeable, monolithic structures such as retaining walls, sea wall, channel linings, revetments, and weirs for erosion control projects.

  • McNeill - Model QUAD - Wastewater Treatment Plant

    Summary of 'Quad' features: Requires less concrete, yard piping and space. Easy to expand at lowest possible cost. Saves up to 50% of energy bill. Built-in surge capacity. Stainless steel aerators. All structural aluminum weirs, baffles, etc. All stainless steel fasterners, anchors and hardware. Requires less operator time than other type plants. ...

    By McNeill Water & Wastewater Inc based in Starke, FLORIDA (USA).

  • Fiberglass Reinforced Polyester Troughs

    Fiberglass reinforced polyester troughs, manufactured by Warminster Fiberglass, are designed for use in water and wastewater treatment plants. They are fabricated to ANSI/AWWA F101-96 Standards and are UL Classified for drinking water system components. Typically, they are used either as wash troughs in the backwashing of gravity filters, or as ...

    By Warminster Fiberglass Company based in Southampton, PENNSYLVANIA (USA).

  • Decanter For Electromechanical Actuator

    Industry-leading, positively-controlled decanter utilizes an electromechanical actuator and variable frequency drive (VFD) to enable multiple control strategies and precise effluent control flexibility. Floating decanters do not offer this capability. Rugged, corrosion resistant stainless steel design for long life with minimal maintenance. ...

    By Sanitaire - a Xylem brand based in Brown Deer, WISCONSIN (USA). from Decanter For Electromechanical Actuator Product line

  • Ducon - Venturi Scrubber

    This Ducon unit features a wetted wall inlet which eliminates wet-dry line build-up and permits direct recycle of high-solids liquid. Scrubbing liquid is distributed over a weir or shelf - no spray nozzles are used. The Venturi is teamed with a mist eliminator for efficient entrainment separation.  

    By Ducon Technologies Inc. based in Farmingdale, NEW YORK (USA). from Venturi Scrubber Product line

  • MGS - Gabions - Wire Fabric Containers

    Gabions are wire fabric containers, uniformly partitioned, of variable size, interconnected with other similar containers and filled with stone at the site of use, to form flexible, permeable, monolithic structures such as retaining walls, sea walls, channel linings, revetments and weirs for earth retention.

  • Telescoping Valves

    Slip Tubes: The valve slip tube shall be of seamless brass, stainless steel or PVC with a minimum wall thickness of 1/8' to prevent corrosion and to ensure proper operation at all times and arranged to slide inside of the sludge draw-off pipe as shown on the drawings. The valve shall have two V-notched weirs located 180 degrees apart.

    By Northcoast Valve & Gate, Inc. based in Mentor, OHIO (USA). from Telescoping Valves Product line

  • Garic - Settlement Tanks

    Garic’s settlement tanks are designed to prevent silt and solid discharge being released into the water course or drainage system. With many authorities and environment agencies now insisting that settlement tanks are used for certain specific applications, it’s crucial that you can find a robust and reliable tank which maintains full ...

    By Garic Ltd. based in Pilsworth, Bury, UNITED KINGDOM. from Settlement Tanks Product line

  • WACO - Weir Gates

    For control of flow through a port opening and to balance flow through parallel systems, the WACO weir gate is the answer. The weir gate opens by lowering its slide plate, allowing water to cascade over the top edge. By adjusting the height of the slide plate, the water level upstream can be controlled. WACO weir gates feature handwheel or ...

    By WACO Products, Inc. based in Baltimore, MARYLAND (USA). from Weir Gates Product line

  • Armtec - Water Control Gates

    Armtec is an industry leader in water control gates for wastewater treatment plants, water treatment plants, and irrigation and flood control projects. Thousands of customers globally can attest to the high quality of Armtec’s gate products.

    By Armtec based in Concord, ONTARIO (CANADA). from Water Control Gates Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you