wet scrubber equipment in New Jersey

  • BELCO - Model EDV - Wet Scrubber

    Refineries and other industries choose BELCO EDV  Wet Scrubbing to control emissions from critical processes that must ALWAYS be in operation and compliance - 24 hours a day / 7 days a week / 365 days a year for multiple years without ever shutting down.

    By Belco Technologies Corporation (BELCO) based in Parsippany, NEW JERSEY (USA).

  • Hamon - Wet Gas Scrubbers

    While many systems can be used to obtain particulate and sulfur oxide reductions, not all systems are created equal. The following sections outline a number of key factors, which make the ExxonMobil Wet Gas Scrubber as supplied by Hamon Research Cottrell the best choice for FCCU emissions control:

    By Hamon USA based in Somerville, NEW JERSEY (USA). from Wet Gas Scrubbers Product line

  • Bionomic Dri-Scrub - Dry and Dry/ Wet Combination Scrubber Systems

    Bionomic Dri-Scrub Dry and Wet/Dry Combination Scrubber Systems are available for gas flows from 160 to 75,000 acfm, provide particulate collection efficiencies between 98 and 99.9% on most applications, and are normally used for scrubbing fine particulate with acid gases. Dry systems utilize a dry venturi scrubber for rapid mixing of the ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Dry and Dry/ Wet Combination Scrubber Systems Product line

  • D.R. Technology - Wet Scrubber and Absorber for Air Pollution Control

    The term “Wet Scrubbers” came into fashion after World War II as people became more aware of the negative effect they were having on the earth’s environment. Along with other technology, Wet Scrubbers were and still are seen as an efficient way of cleansing industrial, commercial and municipal vapor emissions prior to their ...

    By D.R. Technology, Inc. based in Freehold, NEW JERSEY (USA). from Wet Scrubber and Absorber for Air Pollution Control Product line

  • Venturi Scrubbers and Cyclonic Scrubbers

    Venturi scrubbers use high energy impaction of liquid droplets to remove particulate from contaminated air streams. Water or other liquors are directed towards a constriction, or “throat,” where the atomized liquid scrubs the particulate from the air and transfers it to the scrubber liquid droplets. This type of technology is a part of ...

    By AirPol based in Ramsey, NEW JERSEY (USA).

  • Venturi Scrubbers

    Venturi scrubbers are used primarily for particulate removal, and operate on the principle of impaction and agglomeration. Liquid is added to the venturi inlet and accelerated with the gas stream to a high velocity in the venturi throat, where it is forced into intimate contact with the particulate and gaseous contaminants, increasing the ...

    By Hydronics Corp./ Ambient Engineering. based in Rocky Hill, NEW JERSEY (USA). from Venturi Scrubbers Product line

  • D.R. Technology - Particulate Control Systems

    Wet Venturi, Cyclonic, Impingement scrubbers as well as combination systems. Designs are specified to minimize pressure drop and maintenance. We also supply Wet Electrostatic Precipitators for low pressure drop fine particle collection.

    By D.R. Technology, Inc. based in Freehold, NEW JERSEY (USA). from Particulate Control Systems Product line

  • CycloPlus™ - Cyclone Dry Particulate Collector

    The CycloPlus collector is an advanced cyclone design scrubber that offers high retained solid particulate collection as either a primary particulate device for dust removal or recovery or to act as a precleaning stage ahead of a fabric filter collector or wet scrubber to reduce particulate loadings and to increase fabric filter life or reduce ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from Cyclone Dry Particulate Collector Product line

  • BIONOxSOLVER - NOx Scrubbing System

    BIONOxSOLVER is the first major breakthrough process NOx control chemistry to greatly simplify wet scrubbing system operation and dramatically reduce scrubber system complexity and costs. This special proprietary formulation of powerful nitrogen dioxide reducing agents can achieve over 33% greater removal efficiency with one simple chemical ...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA). from NOx Scrubbing System Product line

  • Gas Suspension Absorber Systems (GSA )

    KC Cottrell Inc. can offer wide range of Flue Gas Desulphurization technologies from wet FGD to semi-dry and dry scrubber technologies which can cover large scale utility boilers to medium and smallsize industrial boilers, sintering plants, glass furnaces, biomass boilers and incinerators etc. One of the cutting edge technologies KC Cottrell Inc. ...

    By KC Cottrell, Inc Office in Flemington, NEW JERSEY (USA).

  • High Temperature Dampers

    High temperature dampers include a ceramic refractory lining and specialized stainless steel construction to handle temperatures in excess of 2,000 oF.  The shaft bearings and electric or pneumatic actuator are isolated from the high temperature through the use of heat shields and cooling fins.  The design of the high temperature damper ...

    By Turner EnviroLogic, Inc. Distributor in Shrewsbury, NEW JERSEY (USA). from High Temperature Dampers Product line

  • Process Isolation Dampers

    Process Isolation dampers coupled with fresh air dampers are used when air pollution equipment such as thermal oxidizers or wet scrubbers must be started up prior to the introduction of waste gases into the equipment.  Upon start up the isolation damper is closed and the fresh air damper in open.  Once the air pollution control equipment ...

    By Turner EnviroLogic, Inc. Distributor in Shrewsbury, NEW JERSEY (USA). from Process Isolation Dampers Product line

  • NESTEC - Particulate Control Systems

    For more than two decades, NESTEC has been supplying prepackaged and skid-mounted particulate control equipment in conjunction with our thermal oxidizer technologies for a wide range of airborne particulate pollution control and product recovery applications. These technologies include venturi scrubbers, wet electrostatic precipitators (WESP), ...

    By NESTEC, Inc. Distributor in NEW JERSEY (USA). from Particulate Control Systems Product line

  • Orifice Scrubber

    The Orifice Scrubber is best suited for wet scrubber applications involving high dust loads with particulate size of 2 micron and larger.  Removal efficiencies of up to 99% can be achieved.  A high liquid-to-air ratio, and the ability to incorporate chemical addition, allows the Orifice Scrubber to be applied for acid removal and odor ...

    By Turner EnviroLogic, Inc. Distributor in Shrewsbury, NEW JERSEY (USA). from Orifice Scrubber Product line

  • Dilution Air Dampers

    Dilution air dampers are applied to introduce fresh air into the inlet of thermal oxidizers and wet scrubber systems.  Dilution air mixes with waste stream gases to cool or reduce the concentration of air pollutants

    By Turner EnviroLogic, Inc. Distributor in Shrewsbury, NEW JERSEY (USA). from Dilution Air Dampers Product line

  • Metal Expansion Joint

    Metal Expansion Joints are used to protect duct work and equipment subject to thermal expansion due to high process gas temperatures.  Typical applications include the connection between power generating turbines and Selective Catalytic Reduction (SCR) systems.  Expansion joints are also applied in wet scrubber quench systems.  The ...

    By Turner EnviroLogic, Inc. Distributor in Shrewsbury, NEW JERSEY (USA). from Metal Expansion Joint Product line

  • NESTEC - Scrubber Systems

    For more than two decades, NESTEC has been supplying prepackaged and skid-mounted wet scrubbing systems to control acid gas emissions resulting from the oxidation of halogenated organic compounds. These systems are also designed to control upstream acid gases, including sulfur-based compounds prior to entering the thermal oxidizer.

    By NESTEC, Inc. Distributor in NEW JERSEY (USA). from Scrubber Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you