Wet Scrubber Equipment Near New Jersey
-
Manufactured by NESTEC, Inc.based in USA
Thermal oxidation solutions are the core of an ecosystem that destroys pollutants and allows manufacturers to stay compliant with government regulation. For many businesses, the process of preventing VOCs from escaping into the environment takes place before and after emissions make their way to a thermal oxidizer. To ensure optimal operation in a total clean air solution, there must be multiple ...
-
Manufactured by D.R. Technology, Inc.based in USA
Wet Venturi, Cyclonic, Impingement scrubbers as well as combination systems. Designs are specified to minimize pressure drop and maintenance. We also supply Wet Electrostatic Precipitators for low pressure drop fine particle ...
-
Manufactured by D.R. Technology, Inc.based in USA
Particulate Scrubbers are used to transfer solids, liquid droplets/mists from a carrier gas into a receiving liquid. This transfer requires both the humidification of the gas by the host liquid and creation of target droplets into which the transference occurs. This process requires energy to create the liquid droplets that will humidify and ...
-
Manufactured by D.R. Technology, Inc.based in USA
Pharmeceutical as well as other industrial plants are faced with having either a small emission control unit at each reactor, or one large central emissions control unit with a maze of ductwork running to and from each source. The pollution control units are usually scrubbers/absorbers comprised of a noxious gas/chemically enhanced wet ...
-
Manufactured by D.R. Technology, Inc.based in USA
Particulate Scrubbers are used to transfer solids, liquid droplets/mists from a carrier gas into a receiving liquid. This transfer requires both the humidification of the gas by the host liquid and creation of target droplets into which the transference occurs. This process requires energy to create the liquid droplets that will humidify and ...
-
Manufactured by D.R. Technology, Inc.based in USA
The term “Wet Scrubbers” came into fashion after World War II as people became more aware of the negative effect they were having on the earth’s environment. Along with other technology, Wet Scrubbers were and still are seen as an efficient way of cleansing industrial, commercial and municipal vapor emissions ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
Turner EnviroLogic Packed Bed Scrubbers are used to remove odors and fumes. They are also well suited to neutralize chlorinated and fluorinated gases such as Hydrochloric acid and Hydrogen Fluoride. Packed bed scrubbers are often used as a secondary system in conjunction with thermal oxidizers to remove acid gases that may form in the ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
The Orifice Scrubber is best suited for wet scrubber applications involving high dust loads with particulate size of 2 micron and larger. Removal efficiencies of up to 99% can be achieved. A high liquid-to-air ratio, and the ability to incorporate chemical addition, allows the Orifice Scrubber to be applied for acid removal and ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
Dilution air dampers are applied to introduce fresh air into the inlet of thermal oxidizers and wet scrubber systems. Dilution air mixes with waste stream gases to cool or reduce the concentration of air ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
High energy Venturi Scrubbers are used for the removal of course to very fine particulate. Even sticky and moist particulate can be collected easily. Removal efficiencies of 99.9% for particulate sizes down to 0.1 micron are achievable. Water sprays at the inlet of the Venturi can quench hot gases from processes such as casting, ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
Metal Expansion Joints are used to protect duct work and equipment subject to thermal expansion due to high process gas temperatures. Typical applications include the connection between power generating turbines and Selective Catalytic Reduction (SCR) systems. Expansion joints are also applied in wet scrubber quench systems. The metal ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
the shaft and blade to expand at the high operating temperatures. These dampers are used in thermal oxidizer hot gas by-pass applications and in wet scrubber ...
-
Manufactured by Turner EnviroLogic, Inc.based in USA
Process Isolation dampers coupled with fresh air dampers are used when air pollution equipment such as thermal oxidizers or wet scrubbers must be started up prior to the introduction of waste gases into the equipment. Upon start up the isolation damper is closed and the fresh air damper in open. Once the air pollution control ...
-
Manufactured by BoldEco Environment, Inc.based in USA
BoldEco Environment possesses a great deal of experience in the design and supply of wet, dry and hybrid semi-dry scrubbing systems. BoldEco Environment has been applying conventional wet, dry and semi-dry scrubbing technology for years now, and has recently developed patented SO2 scrubbing technology for the following markets: Power, ...
-
Manufactured by Graver - Marmon Industrial Waterbased in USA
The Graver Lamella design utilizes inclined plate clarification to separate solids from the water and clarify the water. The lamella is composed of a series of removable parallel plates commonly referred to as “lamella plates”. Stacking the inclined plates results in a separator having up to ten times the clarification area of a conventional circular settling tank occupying the same ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Jet Venturi scrubbers can remove dust and gas simultaneously. Their advantage is the ability to handle high concentrations of gases such as Chlorine or other water soluble gases. In many applications, the Jet Venturi can be used without any additional fan. Jet Venturi scrubbers use the energy from the liquid sprayed into the Venturi to ...
-
Manufactured by Branch Environmental Corporationsbased in USA
Removal of Oxides of Nitrogen – N0x can be achieved by injecting Ammonia into the air and passing the resulting mixture over a catalyst. Selective Catalytic Reduction – SCR involves the use of a catalyst that is selective to promote the reaction of Ammonia and N0x to form Nitrogen and water. Several different forms of Ammonia can be used. That is, you can inject a water solution of ...
-
Manufactured by EnviroEnergy Solutions, Inc.based in USA
Our equipment is self- cleaning with minimum maintenance. Demonstration units are available per your request. We would welcome the opportunity to earn your trust and deliver you the best service in the ...
-
Manufactured by Beltran Technologies, Inc.based in USA
These multi-stage, tubular-design systems are able to control emissions at the submicron level, including acid mists, submicron particulates and condensed organics. Beltran Wet Electrostatic Precipitators (WESPs) are utilized in various metallurgical processes, such as zinc, lead, gold and molybdenum roasting plants, nickel and copper ...
-
Manufactured by MikroPul - a Nederman companybased in USA
This basic scrubber has the capability of tolerating high inlet dust loadings without sacrificing its collection efficiency, which is 99+% at around the 5 micron size ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you