Showing results for: Wind Monitoring Equipment Near Sudan
-
Manufactured by Eigenbrodt GmbH & Co. KGbased in GERMANY
The ship rain gauge is designed to measure rain fall on moving ships or buoys. The high relative flow velocities on a cruising vessel may carry the rain almost horizontally over the ship. By measuring the amount of water that is collected by a vertical surface, a correction for the wind effect is possible. Evidently the local relative wind ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The 45118 is a Waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up protective housing extends to 9 in. (229mm) for a better reach. ...
-
Manufactured by FLIR Commercial Systems Inc - Extech Instrumentsbased in USA
The 45158 is a waterproof pocket sized Thermo-Anemometer for Air Velocity, Temperature and Wind-chill measurements. Simultaneously display Air Velocity and Temperature or Wind-chill on the LCD screen. Selectable averaging function of 5, 10, or 13 second intervals. Fold up protective housing extends to 9 in. (229mm) for a better reach. ...
-
Manufactured by Sper Scientificbased in USA
Measure multiple environmental parameters with a single self-contained pen-style meter Air Speed Temperature RH Dew Point Measure multiple environmental parameters with a single self-contained pen-style anemometer. Ideal for field studies and HVAC. Measures wind speed in four units of measure, temperature in ºC & ºF, ...
-
Manufactured by LI-CORbased in USA
The LI-7500RS Open Path CO2/H2O Gas Analyzer is designed for high-speed CO2 and water vapor measurements in ambient air. Low power requirements and low maintenance make it ideal for field ...
-
Manufactured by METER Group, Inc.based in USA
Measuring into stiff headwinds: When it comes to measuring wind, trade-offs have always been involved. Cup anemometers can't measure both wind speed and wind direction (or low wind speeds, for that matter). They're also prone to malfunction since they all contain moving parts. Meanwhile, sonic anemometers have always been too ...
-
Manufactured by LI-CORbased in USA
The TriSonica Sphere was engineered from inception to deliver more precise vertical wind measurements coupled with fast sampling rates (up to 100 Hz) making it ideal for UAS-based atmospheric flux and turbulence research, including eddy covariance studies. The TriSonica Sphere’s unique spherical implementation (U.S. Patent ...
-
by Pöyry PLCbased in FINLAND
We offer operation and maintenance services for energy production plants as well as industrial or municipal energy consumers. Pöyry has its own modern equipment for conducting these ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The WindSonic4 is a two-dimensional ultrasonic anemometer for measuring wind direction and speed. It provides an alternative to traditional mechanical cup and vane or propeller and vane anemometers. This sonic wind sensor outputs an SDI-12 signal that can be read a a compatible Campbell Scientific data logger. (See the Compatibility ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The WindObserver II wind speed sensor is an ultrasonic 2-axis anemometer for the measurement of wind speed and direction. With no moving parts this wind speed sensor is ideal for use in extreme environments.The WindObserver II utilises the same high-performance measurement technology as the Gill WindSonic wind speed sensor, with ...
-
Manufactured by Gill Instruments Limitedbased in UNITED KINGDOM
The WindMaster Pro is constructed from stainless steel and has a maximum operating wind speed of 65 m/s. With a fast maximum data output rate of 32Hz as standard, improved vertical (W) resolution and Speed of Sound accuracy and less distortion due to wind loading, this 3-axis anemometer is particularly suitable for precision wind ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The MetSENS600 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An optical precipitation sensing element ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The P2546A, manufactured by WINDSENSOR, is a Class 1 anemometer often used for wind speed resource assessment and wind turbine power performance monitoring. Wind speed is sensed by a three-cup rotor assembly. Magnets mounted on the shaft cause a switch to close and open two times per revolution. Our data loggers measure the ...
-
Manufactured by WindCube - a Vaisala companybased in FRANCE
The Windcube 400S-AT Lidar provides an operational answer for wind shear hazards: it scans in real time all potential hazard zones within the airport air space, detects wind shears to 10km range, and sends automatic alerts to air traffic ...
-
Manufactured by Scintec AGbased in GERMANY
The Scintec SFAS is a very compact acoustic profiler for the measurement of wind and turbulence up to 500 m above the ground. The operation is based on the reflection of acoustic pulses at temperature inhomogeneities in the air with subsequent doppler analysis. The instrument can replace towers, tethered balloons or radiosondes at a ...
-
Manufactured by R. M. Young Companybased in USA
The Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal. The wind direction ...
-
Manufactured by Scintec AGbased in GERMANY
The Scintec MFAS is a versatile acoustic profiler for the measurement of wind and turbulence up to 1000 m above the ground. The operation is based on the reflection of acoustic pulses at temperature inhomogeneities in the air with subsequent doppler analysis. The instrument can replace towers, tethered balloons or radiosondes at a ...
-
Manufactured by R. M. Young Companybased in USA
Introducing the YOUNG Model 86000 next generation 2D Ultrasonic Anemometer. The sensor offers high performance and low power consumption in a compact size. It is ideal for the most demanding wind sensing ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 05305 is a lightweight, high-performance wind-speed and wind-direction sensor designed specifically for your air-quality measurements. It is more responsive but less rugged than the other wind monitors. Manufactured by R. M. Young, this sensor is cabled for use with Campbell Scientific data ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 034B, manufactured by Met One, combines a three-cup anemometer and vane into a single integrated package to measure wind speed and direction. It is cabled for use with our data loggers, and it can provide you with measurements for a variety of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you