Only show results in Virginia? Ok

Wind Modeling equipment

  • Wind - Model Iris - Turbine-Mounted Lidar

    The Wind Iris is mounted on top of the nacelle for a short period of time. It measures the horizontal wind speed and direction at hub height ahead of the turbine, and generates accurate data to optimize wind turbine performance.

    By Leosphere based in Orsay, FRANCE.

  • Vortex - Model FARM - Most Complete Modeling Software

    Probably the most complete modeling product on the market: long-term statistics at all heights within an area plus high-resolution temperature, mean wind, extreme wind (Vref) and turbulence intensity maps. Now with the ability to be calibrated with measurements!

    By Vortex SL based in Barcelona, SPAIN. from Wind Power Modelling Solutions Product line

  • Enviro - Model 600 Series - RPD Circulator

    The Enviro 600 Series is our most efficient wind powered circulator with a specially designed head and tail system for optimum power performance even under low wind conditions. The circulator floats on the surface of water or wastewater and utilizes 6 radially oriented floats for optimum stability and superior flow velocity. The flotation system ...

    By Dagaz Environmental Inc. based in Assiniboia, SASKATCHEWAN (CANADA). from Wind Powered Models Product line

  • Model MAXI-WIND 4 - Diameter Filter Cartridges

    4' Diameter x 9 3/4' Long: Maxi-Wind cartridges provide extended solids loading at greater efficiency. Their dirt holding capacity is equivalent to 10 square ft. (.93m2) of surface filtration. They are designed for maximum solids loading at a recommended flow rate of 10 gpm (38 LPM). For Model GPO10-1 filter chambers and replacement for original ...

    By Serfilco International Ltd based in Northbrook, ILLINOIS (USA). from Filtration Media - Depth Cartridge (Wound and Melt Blown) Product line

  • Model 1kW - Wind Arrow

    No mechanical furl system. Microprocessor control. 1m silent carbon fiber blades. 3.1 sqm cross-section. Afctm 'active flight control' power management. 'storm otto-shutdown' sos mode. 'softstallpower' ssp mode. Rated >1kw@26mph. 200-500w between 30-60 mph. 24v or 48v system voltage. Battery charging models. Direct to heat (d2h) 48v model. ...

    By True North Power NG Inc. based in Ayr, ONTARIO (CANADA). from Small Wind Product line

  • Model FT742 - Wind Sensor

    The FT742 is our newest model and measures wind speeds up to 75 m/s. Its innovative design incorporates a series of “turbulators” which condition the air flow to deliver our highest levels of accuracy yet. Available in four mounting options, the Flat Front (FF) and Pipe Mount (PM) are typically used in wind turbine control and the ...

    By FT Technologies based in Sunbury-on-Thames, UNITED KINGDOM. from Wind Sensors Product line

  • Scarlet - Model WL-410 - Wireless Wind Alarm System

    WL-410/XB Wireless Wind Alarm System consists of a wind speed sensor and a receiver. The sensor measures wind speed and transmit data to the receiver. The 3.5-inch LCD display of receiver shows readings on the main page and the history graphs are shown in different pages. Based on the preset values, the receiver can trigger local alarms such as ...

    By Scarlet Tech Ltd. based in Taipei City, TAIWAN. from Wind Meter Product line

  • Young - Model 81000 - Ultrasonic Anemometer

    The YOUNG Model 81000 Ultrasonic Anemometer is a 3-axis, no-moving-parts wind sensor. It is ideal for applications requiring fast response, high resolution and three-dimensional wind measurement. The sensor features durable corrosion-resistant construction with 3 opposing pairs of ultrasonic transducers supported by stainless steel members. Each ...

    By R.M. Young Company based in Traverse City, MICHIGAN (USA). from Wind Sensors - Ultrasonic Wind Sensors Product line

  • Young - Model 85000 - Ultrasonic Anemometer

    The YOUNG Model 85000 Ultrasonic Anemometer is a 2-axis, no-moving-parts wind sensor. It is ideal for general meteorological applications requiring accurate, reliable wind measurement.

    By R.M. Young Company based in Traverse City, MICHIGAN (USA). from Wind Sensors - Ultrasonic Wind Sensors Product line

  • Young - Model 05103 - Wind Monitor

    The Wind Monitor is a high performance wind sensor. Rugged, corrosion-resistant construction makes it ideal for a wide range of wind measuring applications. The wind speed sensor is a four blade helicoid propeller. Propeller rotation produces an AC sine wave voltage signal. The wind direction sensor is a rugged yet lightweight vane. Vane angle is ...

    By R.M. Young Company based in Traverse City, MICHIGAN (USA). from Wind Sensors - Mechanical Wind Sensors Product line

  • Model FT702 - Wind Sensor

    The current version of the FT702 is Version 22. Its strength and dependability have made it particularly popular for wind turbine control. It is used globally by the world's leading wind turbine manufacturers, as well as in a range of meteorology applications. The FT702 has two physical mounting options: The Flat Front (FF) for fitment to a bar ...

    By FT Technologies based in Sunbury-on-Thames, UNITED KINGDOM. from Wind Sensors Product line

  • Pulsonic - Model 1022 - Digital Meter 4-20mA

    The 1022 digital meter shows wind speed or wind direction with 14mm LED displays. The digital meter powers the two-wire anemometer 178 or wane 179. It can be equipped with a 2-relay control output card (2RE). Relay is activated if wind speed reaches a programmable threshold. You can specify two different wind speed values.

    By Pulsonic based in Orsay, FRANCE. from Wind Sensors Product line

  • Model MW 11 & 12 - Professional Reference Sensors

    The MW 11 anemometer and MW 12 wind vane are the high performance models in the Mierij Meteo wind sensor range. They use a digital optical measurement principle and are protected against inductive interference and static discharge. The anemometer wind cups and the wind vane flag are larger than usual and they are counterbalanced for accuracy. MW ...

    By Mierij Meteo b.v based in De Bilt, NETHERLANDS. from Wind Sensors Product line

  • Model 16HD, 32HD & 64HD - Miniature Pressure Scanners

    Miniature ESP electronic pressure scanners are differential pressure measurement units consisting of an array of silicon piezoresistive pressure sensors, one for each pressure port. The sensors are mounted on a common hybrid glass substrate using a proprietary technique which maximizes long term stability. The outputs of the sensors can be ...

    By Chell Instruments Ltd. based in North Walsham, UNITED KINGDOM. from Wind Tunnel Product line

  • Model M72 Filter Winding Machine

    We offer the finest quality, made in the USA, state of the art, continuous wound filter winding machinery. Filter length changes can be performed quickly, with minimal down time involved. Any filter length can be obtained to meet your customer's requirements. Micron changes are accomplished by changing the pair of change gears located on the end ...

    By Textile Industries, Inc. based in Chicago, ILLINOIS (USA). from Filter Winding Machinery Product line

  • CorGal - Tanks With Flat Roof

    CORGAL tanks are available with smooth galvanized steel flat roof systems where the overall height of a pitched roof tank may be a problem. Smooth flat roof tanks can be designed for most snow and wind loads. The smooth flat roof tank consists of an interior galvanized steel, formed joist support system covered with bolted galvanized steel panels ...

    By Water Storage Tanks, Inc based in Austin, TEXAS (USA). from Tank Models & Sizes Product line

  • 200-05106 Wind Monitor-MA (Marine Model)

    For offshore and marine use, the 200-05106 Wind Monitor-MA offers the added features of special bearing lubricant and sealed heavy duty cable pigtail in place of the junction box.

    By NovaLynx Corporation based in Grass Valley, CALIFORNIA (USA). from Wind Speed and Direction Sensors Product line

  • Model M40 Filter Winding Machine

    We offer the finest quality, made in the USA, state of the art, continuous wound filter winding machinery. Filter length changes can be performed quickly, with minimal down time involved. Any filter length can be obtained to meet your customer's requirements. Micron changes are accomplished by changing the pair of change gears located on the end ...

    By Textile Industries, Inc. based in Chicago, ILLINOIS (USA). from Filter Winding Machinery Product line

  • CorGal - Tanks With No Roof

    CorGal tanks are available without a roof for those applications that do not need to protect the stored product from the sun. The no roof tank consists of corrugated galvanized steel wall sheets only. The no roof tanks are equipped with a geotextile preliner and either a 25 mil. or 40 mil. flexible membrane main liner for water containment.

    By Water Storage Tanks, Inc based in Austin, TEXAS (USA). from Tank Models & Sizes Product line

  • CorGal - Tanks With Corrugated Flat Roof

    CorGal tanks are available with corrugated flat roof systems for those applications that do not desire a pitched roof and where snow loads are not a concern. The corrugated flat roof tank consists of corrugated galvanized steel wall sheets with an interior joist roof system covered with corrugated galvanized steel roof panels. The corrugated flat ...

    By Water Storage Tanks, Inc based in Austin, TEXAS (USA). from Tank Models & Sizes Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you