Wind Speed Sensor Equipment Near Comoros
-
Manufactured by Casellabased in UNITED KINGDOM
The Guardian2 Site Boundary Monitor is designed to help you remain compliant with site emission levels, using remote monitoring and reporting of noise, dust and vibration levels. Powered by mains, solar or battery, the Guardian2 is ideal for any construction noise monitoring or environmental dust measurement location, no matter how remote. For further details on solar or battery power options see ...
-
Manufactured by Casellabased in UNITED KINGDOM
The Guardian2 Site Boundary Monitor is designed to help you remain compliant with site emission levels, using remote monitoring and reporting of noise, dust and vibration levels. Powered by mains, solar or battery, the Guardian2 is ideal for any construction noise monitoring or environmental dust measurement location, no matter how remote. For further details on solar or battery power options see ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OSI AWOS AV system is a fully automated aviation weather observing and reporting system designed to support airborne and ground users. This FAA-certified AWOS is equipped with dual-pressure sensors and visibility sensors for determining official altimeter settings, visibility, and reporting via FCC-licensed UHF data radio, Internet, land ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The HazMET100 Portable AWS is an advanced, Portable Automated Weather Station built around the 2100-138 Multi-parameter Meteorological Sensor. The low power requirements of the HazMET100 AWS make it well suited for portable battery and solar powered applications. The system has been designed from the ground up for fast setup ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
OSi's patented Wind Speed and Smoke Sensor (WSS™) makes drift free air flow measurements across the tunnel, calculates true average wind speed, and detects smoke. The WSS-300-DS model is equipped with Automatic Gain Control (AGC) to compensate for variations in opacity caused by particulate matter, smoke, ...
-
Manufactured by Your Data Our Care B.V. (YDOC)based in NETHERLANDS
The ML-x17 data logger is a small, ultra low power, cost effective data logger with built-in 2G, 3G or 4G cellular modem. This small data logger, is further provided with an internal temperature sensor, 8GB micro SD card and a 2FF SIM card slot. The data logger is available with several power provisions e.g. a 3.6 Volt Lithium battery, 8..28V ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ecomesure offers an ultrasonic wind speed and wind di-rection sensor. It is a compact and efficient sensor that can be easily integrated into the environmental data web platform www.i-comesure.com. EcomWind automatically connects to the web platform for real-time data monitoring and sensors ...
-
Manufactured by Scarlet Tech Ltd.based in TAIWAN
Scarlet WindSmart bluetooth anemometer turns your smartphone into a high-tech meteorological tool. The professional cup anemometer takes the real-time data of current, average, maximum wind speed, temperature, and wind direction (optional). The sensor can operate with multiple smart devices at the same time. The user may set an ...
-
Manufactured by Scarlet Tech Ltd.based in TAIWAN
WR3-Plus is a long-range portable wireless anemometer. It has a handheld portable display unit and sensor suitable for both permanent and temporary installation. The sensor transmits data every 2 seconds in 500m radius from the receiver. Each sensor has its own address so several anemometers can operate in close proximity without ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The HiVol 3000 PUF Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The PUF utilises poly-urethane foam (PUF) to trap organic vapours in addition to collecting particulate matter and store it in a sterile environment for later ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The MegaVol 3000 particulate sampler performs remote unattended sampling of particulates and is ideal for heavy metal and radiation exposure ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
attachments allow the sampler to measure wind speed and direction which can then be used to trigger sector selectable sampling (e.g. fence-line ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The MicroVol 1100 low volume air sampler provides a flexible sampling platform for PM10, PM2.5 or TSP particulates and basic meteorological parameters. ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
with weather sensors to provide wind speed and direction data, Rh and ambient temperature. The monitor provides analogue outputs that can be used to activate localised visible or audible alarms if preset conditions are exceeded, as well as digital outputs for remote data extraction. The Protinus 1000 can be solar powered and equipped with a ...
-
Manufactured by Acoem Australasiabased in AUSTRALIA
The HiVol 3000 XAD Sampler provides a flexible platform for sampling organic compounds and monitoring basic meteorological parameters. The XAD sampler collects a wider variety of compounds (than a PUF sampler) on a hydrophobic polyaromatic resin ...
-
based in GERMANY
The EDM 465 combines the reliable technology of our butanol condensation particle counters with easy handling and flexible application for environmental monitoring due to a compact, robust and mobile weather housing. The EDM 465 is applicable for short and long-term continuous monitoring of ultrafine particles and enables a real-time data analysis of nanoparticles and meteorological measurement ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 014A, manufactured by Met One, is a three-cup anemometer that monitors wind speed for the range of 0 to 45 m/s with a threshold of 0.45 m/s. You connect the 014A directly to a Campbell Scientific data logger, which measures the anemometer's pulse signal and converts the signal to engineering units (mph, m/s, ...
-
Manufactured by Campbell Scientific, Inc.based in USA
an electronic switching current. In response, this generates an output signal with a frequency that is proportional to the wind speed. The durable construction is suitable for both on-shore and off-shore environments. The “D” version of this sensor (electronic version) is compatible with all Campbell Scientific measurement and ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The 05103 Wind Monitor is a lightweight, sturdy instrument for measuring wind speed and direction in your harsh environments. Its simplicity and corrosion-resistant construction make it ideal for a wide range of wind measuring applications. Manufactured by R. M. Young, this wind monitor is cabled for use with ...
-
Manufactured by Campbell Scientific, Inc.based in USA
The WindSonic4 is a two-dimensional ultrasonic anemometer for measuring wind direction and speed. It provides an alternative to traditional mechanical cup and vane or propeller and vane anemometers. This sonic wind sensor outputs an SDI-12 signal that can be read a a compatible Campbell Scientific data logger. (See the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you