wood waste Equipment available in Nepal

Available in Nepal| Near Nepal
627 Results found

We couldn't find any wood waste equipment in Nepal

Here is a list of results available in Nepal

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: wood waste ×

  • Available in: Asia & Middle East ×

  • Available in: Nepal ×

ERS - Green and Wood Waste Grinders

by Eco Recovery Systems Inc     based in St. George, UTAH (USA)

Our grinders offer consistent material sizing and processing rates that are the highest in the industry! Whether you compost or produce reusable bi-products from green waste, you can depend on our grinders to increase production and keep your operation consistent.

ACTA - Wood Waste Crusher

by ACTA Recycling ApS     based in Odense, DENMARK

Why is the ACTA Crusher used for crushing Wood Waste Crushed Wood Waste is often used as fuel chips/briquettes or as 'new' raw material for chip board production. Due to the fact that wood waste contains a lot of foreign items such as nails, screws, brackets etc. it is a must that the wood waste is pre crushed before entering into a fine shredder. ...

Municipal Solid Waste Msw, Wood Waste Incineration

by Ruixin Environmental Specialty Equipment Manufacturing Co.,Ltd. (RESEM)     based in shangqiu, CHINA

municipal solid waste MSW, wood waste incineration,RESEM|A Leading Pyrolysis Plant Manufacturer,RESEM provides Pyrolysis Oil Plant systems that convert petroleum based waste streams such as plastics, tires, into quality fuels oil, carbons .http://www.pyrolysisoil.net, Product Details Place of Origin: Henan China (Mainland) Brand Name: RESEM Model ...

UNTHA - Model RS30/40 - Wood Shredder

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

The reliable and very sturdy RS30 and RS40 shredders have been tested and proven over several decades and are used particularly for processing long solid timber pieces. The wood chippers can be operated as stand-alone solutions or integrated into complex systems where they tend to be a favourite thanks to their very compact design. They are ...

C. F. Nielsen - Wood Waste Briquetting Planing Plant - 2800 kg/h Capacity

by C. F. Nielsen A/S     based in Baelum, DENMARK

This case shows a 3-shift briquetting plant installed in a major Swedish planing factory to deal with the wood waste as it occurs. The briquetting line has a capacity of 2800 kg/h of softwood briquettes from the available production waste. It includes two BP 5500 briquette presses placed under a deck in the lower part of a large storage silo.

UNTHA - Model LR1000/1400 - Reliable Wood Shredder

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

The LR1000/1400 is fully adaptable to your application situation and is suitable for businesses with a wood waste volume of 12m³ per week. Thanks to its size the shredder is ideal for pallets and bulky wooden pieces. The strong throughput capacity of the LR1000/1400 is a result of the powerful motors and the performance-oriented machine ...

Enerpat - Model MSC-85 - Waste wood shredder

by Enerpat Group UK Ltd     based in Brentwood, UNITED KINGDOM

ApplicationsAluminium Cans&Bottles Cardboard Corrugated Carpet Cartons,Cores&Tubes Documents Printing Waste Plastics Drum Organic Waste Plastics RecyclingNo Model MSC-851 Throughput (Tons/hour) 4.52 Motor Power (Kw) 853 Cut Room (mm) 1000*8004 Blade Width(mm) 155 Steel Material Alloy Steel6 Machine Size ...

VacuDry - Mercury Recovery / NORM Wastes

by econ industries GmbH     based in Starnberg, GERMANY

Applications and design, Process: Indirect Heated Vacuum Thermal Desorption / Vacuum Distillation. Source: By-product from industrial processes, e.g. Chloralkali electrolysis Mercury contaminated sludge from natural gas drilling, oil and gas NORM Residues from fungicidal production, wood impregnation, amalgamation or recycled fluorescent tubes ...

UNTHA - Model LR630 - Wood Shredder with Low Price and High Performance

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

The LR630 is a very sturdy wood shredder that is convincing thanks to its technology and expertise. The machine is designed for a long service life and energy efficiency and can be optimally adjusted to your needs. The LR630 is best suited for companies that have a residual timber volume of up to 7 m³ per week. The LR630 is completely focused ...

Macpresse - Model MAC 1000 - Waste Paper Shredders

by Macpresse Europa S.R.L     based in Vernate, ITALY

Ideal to shred waste paper, the MAC 1000 model is fitted with a single fast rotor and fixed hammers for high hourly output and easily shreds material in thick and bulky packs such as bundled newspapers. To get a balanced output between baler and shredder we recommend coupling this model with the MAC 106 balers.

WEIMA - Model WL 6s - Universal Shredder Used for Wood and Timber Waste

by WEIMA     based in Ilsfeld, GERMANY

The WL 6s shredder is used for shredding large quantities of wood and timber waste. The machines are fitted with very high powered rotors of 800 mm width. The rotor diameter is 368 mm. The large rotor and the wrap angle of the screen ensure high throughput rates. Machines with a drive output of 30 kW or more are fitted with a hydrodynamic clutch, ...

UNTHA - Model XR3000 - Waste Shredder

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Very efficient low-speed waste shredder for shredding coarse and medium-sized waste. The XR series is a high-performance shredder that is utilised as pre-shredder or single-phase shredding solution. It is both low maintenance and easy to maintain with a long service life. The smooth operation of your system is ensured with replacement parts ...

Enerpat - Model MSC-41 - Wood pallet shredder

by Enerpat Group UK Ltd     based in Brentwood, UNITED KINGDOM

ApplicationsAluminium Cans&Bottles Cardboard Corrugated Carpet Cartons,Cores&Tubes Documents Printing Waste Plastics Drum Organic Waste Plastics RecyclingNo Model MSC-411 Throughput (Tons/hour) 2.52 Motor Power (Kw) 413 Cut Room (mm) 800*8004 Blade Width(mm) 155 Steel Material Alloy Steel6 Machine Size ...

Waste Template Crusher

by Zhengzhou Xincheng Mechanical Equipment Factory     based in Gongyi City, CHINA

The waste template crusher is a kind of professional grinding equipment for crushing the site template, bamboo veneer scrap, shelves, bracket and tray. The mainly processed materials are waste building templates, wood plate, container, waste wood boxes, etc. The waste template crusher mainly consists of work platform, feed roller and feed ...

KAHL - Fabric Belt Drier for Wood

by Amandus Kahl GmbH & Co. KG     based in Reinbek, GERMANY

Intelligently Controlled for gentle drying of wood shavings and wood chips we have developed special belt driers ensuring: Optimum product quality amd Economic operation.

KAHL - Wood Pelleting Plants

by Amandus Kahl GmbH & Co. KG     based in Reinbek, GERMANY

KAHL WOOD PELLETING - A high quality awareness establishes KAHL on the wood pellet market. For more than 30 years Kahl has dealt with this product and can offer a sophisticated process for the production of high-quality pellets with very good combustibility, now.

Multiple Filter Sleeves

by Scottex Precision Textiles Ltd     based in Bury, UNITED KINGDOM

These can be made from either woven cotton or Polyester needlefelt. The dust collects on the inside of the bag, as it enters from the bottom. The is fixed at the bottom of the filter unit by either a snap band and double felt seal or a double garter spring cuff. The closed end is normally either hung from or screwed to the roof, via a metal disc. ...

Single Dust Collection Bags

by Scottex Precision Textiles Ltd     based in Bury, UNITED KINGDOM

These can be made from either woven cotton or Polyester needlefelt. The dust collects on the inside of the bag. Popular OEM makes are Startrite, Mardon, P & J, etc. When ordering just give us the length and diameter or circumference and we can instantly give you a price. Prices start from £12.50.

Multipocket Filter Bags

by Scottex Precision Textiles Ltd     based in Bury, UNITED KINGDOM

Multipocket type bags have the pockets joined together to give a large filter media surface area in a small space. Pockets are either shaken from the bottom (ie, DCE types) or from the top (i.e. Airmaster type).

Wood

by Vecoplan     based in Bad Marienberg, GERMANY

The material recycling apart, energetic use of wood as a renewable source of energy is becoming more and more important. This is only feasible through effective shredding of the input materials for further processing. Additionally, treatment technologies which meet the demands of cleanness and determinate the output size are necessary. Since many ...

Need help finding the right suppliers?

Let the XPRTs do the work for you