working environment Equipment in Oklahoma

25 Results found

Current filtering criteria

You can remove a filter by clicking on the x
  • Keyword: working environment ×

  • In: USA ×

  • In: Oklahoma ×

Low Entry Tilt (LET2)

by Crane Carrier Company (CRANE)     based in Tulsa, OKLAHOMA (USA)

Crane Carrier’s LET2 is a work horse with sophisticated engineering and quality that’s built to last. Rugged framework, durable cab construction and attention to detail makes this vehicle a good investment with an ergonomic cab environment that will keep your employees healthy and safe.

Model OBT - Oil Degradation

by United-Tech, Inc.     based in Tulsa, OKLAHOMA (USA)

OBT Oil Degradation Treatment is designed to clean up oil spills on both land and in water - safely and naturally. Organic compounds such as crude oil and gasoline are converted into non-toxic substances such as carbon dioxide, water and oxygen, thereby ensuring a cleaner, healthier environment. For reasons of principle and pragmatism, the ...

3nine - Model Nina 1200 - Oil Mist Separator - Green Line Units

by 3nine AB     Office in Catoosa, OKLAHOMA (USA)

The Nina 1200 is suitable for all applications involving processes using oil, coolants or other lubricants. Nina 1200 works on all machine tools with a cabin volume up to 424 CF.

3nine - Model Anna 600 - Oil Mist Separator - Green Line Units

by 3nine AB     Office in Catoosa, OKLAHOMA (USA)

The Anna 600 is suited for all applications involving processes using oil, coolants or other lubricants. The Anna works on all machine tools with a cabin volume up to 212 CF.

Enviro Loo - Waterless, Zero-Discharge On-Site Treatment System

by Clean Up America, Inc.     based in Tulsa, OKLAHOMA (USA)

The Enviro Loo (“Eloo”) is a waterless, zero-discharge on-site treatment system for human waste. The Eloo provides an environment which treats and stabilizes human waste via dehydration and evaporation into an inoffensive and harmless material, without the use of water or chemicals.

3nine - Model Lova 900 - Oil Mist Separator - Green Line Units

by 3nine AB     Office in Catoosa, OKLAHOMA (USA)

The Lova 900 is suited for all applications involving processes using oil, coolants or other lubricants. Lova works on all machine tools with a cabin volume up to 318 CF.

Front End Loader Tires

by SETCO Solid Tire & Rim     based in Idabel, OKLAHOMA (USA)

SETCO tires for front end loaders are extremely durable, allowing versatility of the machine by enabling the machine to work in tough areas where otherwise, without SETCO non-pneumatic tires, those tough areas would be inaccessible. SETCO’s front end loaders tires are guaranteed to provide a lower cost per hour with no catastrophic tire ...

Custom Silencers

by Innova Global Limited.     Office in Tulsa, OKLAHOMA (USA)

Innova offers testing, analysis, design and installation of cost-effective custom designed silencers that offer guaranteed results. Innova uses a proven, in-house proprietary silencer design program to design silencer baffles. Our acoustic baffle fill material is tested for exact acoustic properties to ensure acoustic performance, and the material ...

3nine - Model Nova 300 - Oil Mist Separator - Green Line Units

by 3nine AB     Office in Catoosa, OKLAHOMA (USA)

The Nova 300 is suited for all applications involving processes using oil, coolants or other lubricants. The Nova works on all machine tools with a cabin volume up to 70CF (2m³) and has a flow rate capacity of 176 CFM (300 m³/h) .

Haul Road Dust Control

by Midwest Industrial Supply, Inc.     Office in Checotah, OKLAHOMA (USA)

Haul road dust presents all kinds of problems for mines and miners alike—from accelerated tire wear to reduced traction in wet environments. Those relying exclusively on water for haul road dust suppression know that supplies can be scarce and prohibitive, that PM10 and PM2.5 emissions are dangerous to both health and safety, and that the ...

Push-Pull System

by Plymovent Group BV     Distributor in OKLAHOMA (USA)

Solutions for various facility layouts: Installing a Push-Pull system in your facility not only creates a cleaner, safer work environment, but also provides cost savings. As it is a modular system, the entire facility does not need to be changed; specific work zones can be designated for new ventilation.

EnviroClean - Model RTU - Water Based, Biodegradable, Blended, Surfactant Concentrate Product

by Enviro Clean Products & Services     based in Oklahoma City, OKLAHOMA (USA)

Water based, biodegradable, blended, surfactant product. Mixed and blended using softened water at a ready-to-use 5% working dilution.Emulsifies and encapsulates hydrocarbons and fats, oils, and grease instantly. Increases bioavailability resulting in rapid hydrocarbon degradation. Suppresses VOC vapor release. As a wetting agent, dramatically ...

IDEAL - Model PRE-FAB - Skid Mounted Systems

by World Water Works, Inc.     based in Oklahoma City, OKLAHOMA (USA)

Systems are pre-engineered, skid mounted all pre-wired and pre-plumbed with pre-calibrated instrumentation, chemical feed systems, and control systems.  They are set up for a “plug-n-play” mode which greatly reduces onsite work.

3nine - Model Lina 500 - Oil Smoke and Oil Mist Separators

by 3nine AB     Office in Catoosa, OKLAHOMA (USA)

The Lina 500 is the smallest oil mist separator in the 3nine BLUE LINE Series. It was specifically designed for enclosed machine tools, with a cabin size of 176 CF or less.

Thermal Oxidizer Systems

by John Zink Company, LLC     based in Tulsa, OKLAHOMA (USA)

Today’s gas and liquid pollution control applications require the world’s most advanced thermal oxidizer systems to destroy hazardous air pollutants (HAPs) and volatile organic compounds (VOCs) while meeting or exceeding tougher environmental regulations.

EnviroClean - Model EC-165 - Water Based, Biodegradable, Blended, Surfactant Concentrate Product

by Enviro Clean Products & Services     based in Oklahoma City, OKLAHOMA (USA)

Formerly known as EC-165, Water based, biodegradable, blended, surfactant concentrate product, The color of EnviroClean serves to help identify sheening for spill response, Completely miscible in water and will not cloud or separate upon dilution, Unlimited shelf life (unopened), Does not contain builders, petroleum distillates, caustics, tall ...

Compressor Stations

by Innova Global Limited.     Office in Tulsa, OKLAHOMA (USA)

In the oil & gas industry you need to focus on getting your product from in the ground to market as quickly and economically as possible. With Innova's new Turnkey Compressor stations, we help you do just that by reducing the cost and time it takes for you to source, design, fabricate, procure, install and commission a compressor station.

Multiple Arm Systems

by Plymovent Group BV     Distributor in OKLAHOMA (USA)

Fully controlled multiple arm system removes welding fumes effectively. We offer a wide range of extraction arms for at-source capture of welding fumes and grinding dust. Different arm lengths and diameters can be specific to certain processes and application. Plymovent extraction arms are available in working radiuses from 1.0 to 8.8 metres with ...

Thermal Oxidizers and Oxidation Systems

by MRW Technologies, Inc.     based in Glenpool, OKLAHOMA (USA)

Direct-fired thermal oxidizers (no heat recovery boiler or heat exchanger), Horizontal, Vertical up-fired or down-fired thermal oxidizers, Fume Incinerators, Heat exchanger options - waste heat boilers, heat exchangers, or secondary heat recovery, Tail gas incinerators.

MistEliminator - Modular Filter System for Effective Removal of Oil Mist

by Plymovent Group BV     Distributor in OKLAHOMA (USA)

The MistEliminator is a modular filtration system that reduces the background concentration of oil mist in lathes or dedicated (CNC) machine centres during metalworking processes. Depending on the type of oil mist, you can either choose the ME-3 or ME-4 series. All filter units and filter banks are modular and can be tailored to your needs.

Need help finding the right suppliers?

Let the XPRTs do the work for you