Showing results for: Zirconia Oxygen Analyzer Equipment In Africa
-
Distributed by N&Z Instrumentsbased in SOUTH AFRICA
Industrial boilers and furnaces are large consumers of fuel and can also cause excessive environmental pollution. Continuous measurement of oxygen concentration in combustion exhaust gases can improve fuel efficient and minimise environmental impact. Fuji, a long-standing manufacturer of gas analysers, supplies a low-cost and user friendly ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100-OEM-RSB range are special miniaturised 24V OEM versions of our existing high-performance zirconia oxygen (O2) analyser. The compact new design allows integration into the tightest of spaces with the exact same performance specs and features of our existing OEM analyser. The board is fitted with a robust cabled zirconia ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
all UL and IEC standards for these types of enclosures. There are cable entry glands on the base for power cables and analogue / digital / alarm leads The analyser comes with a robust cabled zirconia sensor, which is ideal for providing fast and accurate remote in-situ gas analysis over the the full oxygen range 10-20ppm to 30% O2. An ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100-OEM-RSB range are special miniaturised 24V OEM versions of our existing high-performance zirconia oxygen (O2) analyser. The compact new design allows integration into the tightest of spaces with the exact same performance specs and features of our existing OEM analyser. The board is fitted with a robust cabled zirconia ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 2100-FGA Forming Gas Analyser is a special variant of an existing zirconia oxygen analyser which allows fast and accurate oxygen analysis over the full oxygen range to extremely low levels commonly found in hydrogen forming gas. The sensor measurement range is extended down to 10E-30ppm O2 to cover the ultra-low ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Rapidox 3100 OEM-3 is a three-channel version of our high-performance zirconia oxygen (O2) analyser. Supplied in a metal controller box, the Rapidox 3100 OEM-3 comprises three individual zirconia sensors on bespoke length cables with several options for gas fittings. All three sensor channels are controlled by a single RS485 ...
-
Manufactured by AMETEK MOCONbased in USA
Are you always getting the right blend of gas? Did you know that your bottom line becomes as invisible as the gas you are using if you supply the wrong gas mix to you processes?. Dansensor has designed the MAP Check 3 Pressure gas analyzer to ensure that you are always getting the right blend of ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Building on the legacy of performance and high reliability of its predecessor, the WDG-V UOP/RP was designed in conjunction with UOP Continuous Catalyst Regeneration (CCR) process requirements for low-level oxygen (O2) measurement during the regeneration cycle in which coke deposits are removed from the catalyst by ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Measures the hydrogen concentration in a gas sample and then digitally reports the percent volume of hydrogen in air. The 120HD analyzer functions as a katharometer. It operates by having two parallel tubes that both contain gas and heating coils. The gases are examined by comparing the rate of loss of heat from the heating coils into the ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Completely field serviceable, the WDG Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer probe design enables the removal of cell, heater and thermocouple assembly through the probe head. ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
A trace oxygen analyzer offering superior protection for a range of industrial applications through a rapid response to process changes. With a modular design for easy upgrades and field service, the TM2000 can accurately respond from atmosphere to low parts per million (ppm) in just seconds, serving a wide measurement range from 0.1 ppm to ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG-V Blowback offers a complete, direct-mounted solution with automated blowback functionality for combustion process control and safety in coal-fired power boilers and high-particulate applications. The WDG-V Blowback uses an integrated package to reduce footprint, eliminate heated sample line and simplify installation with single air/power connections. Users can also automate or manually ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you