Zirconia Oxygen Analyzer Equipment
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
IMR 6400 High Temp intelligent oxygen analyzer uses an advanced anti-interference circuit and an anti-volatile data protection function. The display will automatically switch to any range for the set limit concentration on the ...
-
Manufactured by Teledyne Monitor Labs, Inc.based in USA
The SM425 is ideally suited for both compliance monitoring of diluent gas (Environmental Compliance) and Oxygen monitoring for combustion and process control applications. The SM 425 offers state of the art oxygen analysis and a rugged industrial ...
-
Manufactured by GRYF HB, spol. s r.o.based in CZECH REPUBLIC
Since the launch of the first generation in 2010, GRYF OXY Z stands for the most reliable and endurant Zirconia oxygen analyzer on the market. The second generation combines the exceptional features of its predecessor with a modern design and new, sophisticated ...
-
Manufactured by Bhoomi Process Management Pvt. Ltd.based in INDIA
The Agasthya 2013 Series Insitu Zirconia Oxygen Analyzer BI 2100-S is designed for Combustion Process & Emission Monitoring where flue gas temperature is upto 700 deg C. It provides accurate measurement of excess oxygen in flue gas of combustion processes. Optimal combustion efficiency is achieved by maintaining the ideal ...
-
Manufactured by Henan Chicheng Electric Co., Ltd.based in CHINA
The CRO-310 online zirconia oxygen analyzer is composed of a microprocessor-based intelligent signal converter and a zirconia detector. The detector adopts a straight-in structure and does not require a sampling system for online measurement. The oxygen concentration in the gas is measured, and the standard 4~20 ...
-
Manufactured by COSA Xentaur - a brand by Process Insights, Inc.based in USA
COSA’s zirconia oxygen gas analyzers are widely used; not only in industries of high energy consumption, such as steel, power, petroleum/petrochemicals, ceramics, paper/pulp, food, and textile industries, but also in various combustion facilities, such as garbage incinerators and medium-to-small sized boilers, as combustion ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Completely field serviceable, the WDG Insitu is a direct-sensing oxygen (O2) probe suitable for applications where the flue gas temperature does not exceed 800oC (1472oF). With a range of different probe lengths offered, its unique inner/outer probe design enables the removal of cell, heater and thermocouple assembly through the probe head. ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG-V Blowback offers a complete, direct-mounted solution with automated blowback functionality for combustion process control and safety in coal-fired power boilers and high-particulate applications. The WDG-V Blowback uses an integrated package to reduce footprint, eliminate heated sample line and simplify installation with single air/power connections. Users can also automate or manually ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The WDG 1200/integral electronics Insitu and the WDG 1210/remote electronics Insitu are rugged, reliable flue gas analyzers that use trusted zirconium oxide sensor technology for net oxygen (O2) measurements. The unique sensor design allows the entire sensor assembly, including the heater, to be removed without disturbing the outer protection ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Designed for safety and serviceability, the WDG-V is a flue gas analyzer designed to provide accurate measurements of oxygen (O2), combustibles (CO+H2) and methane (CH4) for process control and safety in combustion applications. Offering safe, reliable operation through continual diagnostic checks and proactive alarms, the analyzer ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Building on the legacy of performance and high reliability of its predecessor, the WDG-V UOP/RP was designed in conjunction with UOP Continuous Catalyst Regeneration (CCR) process requirements for low-level oxygen (O2) measurement during the regeneration cycle in which coke deposits are removed from the catalyst by ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
Measures the hydrogen concentration in a gas sample and then digitally reports the percent volume of hydrogen in air. The 120HD analyzer functions as a katharometer. It operates by having two parallel tubes that both contain gas and heating coils. The gases are examined by comparing the rate of loss of heat from the heating coils into the ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CG1000 is a portable oxygen analyzer designed for industrial and laboratory applications. It has a wide operating range (0.1 ppm to 100% O2, autoranging), a fast response to oxygen changes, and advanced electronic capabilities for easy system ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
A trace oxygen analyzer offering superior protection for a range of industrial applications through a rapid response to process changes. With a modular design for easy upgrades and field service, the TM2000 can accurately respond from atmosphere to low parts per million (ppm) in just seconds, serving a wide measurement range from 0.1 ppm to ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
wide ranges of temperature and pressure, we offer paramagnetic-based oxygen analyzers. Zirconia oxygen analyzers are ideal for applications that require accurate and reliable measurements over long periods of time in extreme temperature environments, while tunable diode laser absorption spectroscopy (TDLAS) is ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Continuous Emission Monitoring System CEMS II e offers modular and TÜV and MCERTS certified (QAL1) solution for environmental compliance in industrial processes, such as powerplants, waste incineration, cement plants and beyond. The system adjusts to changes in regulations and future advances of emissions monitoring best practices with ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
It applies to the measurement of oxygen content in high-temperature atmospheres in industrial heating devices such as metallurgy, electric power, heat treatment, ceramics, cement, etc. In-line structure, the fast response speed of the probe, direct conversion of oxygen content into electrical signal output, real high-temperature ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you