L&J Engineering - Model MCG 1030 - Analog Output Level Probe
Accurate and Reliable: The construction of this probe makes it ideal for severe service installation where reliable performance is essential. The explosion-proof housing is approved for use in Class I, Division 1, Group C and D environments, allowing the MCG 1030 to be used in application where the distance from the probe to the receiver is too great to utilize an intrinsically-safe barrier.
Product Details
Multi-Purpose
The operating length of the probe (up to 25 feet) permits installation into nearly any type of liquid storage vessel: above ground or underground. The standard mounting is accomplished with a 7/8' NPS connector. Flanged connections are also available.
Level Measurement and Point Switch...All in One
Because of the probe's packaging and high degree of repeatability, the MCG 1030 can provide both level gauging data and act as a point switch for process vessels overspill alarms. When interfaced to an L&J engineering MCG 1200 or MCG 1010M Magnetostrictive Receiver, the level data can be viewed at tankside.
Proven Technology
The magnetostrictive technology of the MCG 1030 has been proven to be extremely reliable. The probe is comprised of a wave guide, a float with permanently-embedded magnets, a motion or stress sensing device, and a probe housing.
Compatibility
Standard outputs include 4-20mA or 1-5 V. This allows the unit to be incorporated into an existing system or controller with no modifications. Communication via the L&J 4-wire 'Tankway' is made possible by interfacing the probe with one of L&J engineering's receivers or transmitters. If this approach is applied, the MCG 1030 becomes a source of information for a comprehensive gauging or SCADA system.
Benefits
- Magnetostrictive technology
- Accuracy of +/- 1/8' with a High Resolution (+/- 1/32') Option Available
- Up to 25' Measuring Range
- 4-20 mA or 1-5 Volt Output
- Combines with MCG 1010M for Local Indication and Digital Level Transmission
- High Pressure Applications
Applications
- Level gauging on LPG bullet-style tanks
- Level measurement of waste water treatment tanks
- Inventory control of crude oil collection tanks
- Level control in the plating process
- High-level alarm for tanks and process vessels
Specifications
- Output:
- 4-20mA or 1-5 Volt
- Resolution:
- Standard +/- 1/8” (Optional +/- 1/32”)
- Accuracy:
- +/- 1/8” (optional +/- 1/32”)
- Tank Connection:
- 7/8”NPS, fl ange (opt.)
- Standard Float:
- 2” diameter, 316 SS Float
- Power Requirements:
- 24VDC
- Measuring Range:
- Up to 25 feet
- Surge Protection:
- Yes
- Probe Construction:
- 316SS (Other Materials Available)
- Safety Approvals:
- CSA-Explosion proof
- Class I, Div.1 Groups C&D
- CENELEC / ATEX
- II 1/2 G, EEX d IIB T6
- Installation Methods:
- Inside Tank through riser or fl anged opening.
- Outside tank via bridal or fl oat chamber
- Local Display Available via MCG 1200M or MCG 1010M
Customer reviews
No reviews were found for L&J Engineering - Model MCG 1030 - Analog Output Level Probe. Be the first to review!