- Model LEDWP-600-RGB - Color Changing LED Wall Pack Light

0

The LEDWP-600-RGB Color Changing LED Wall Pack Light offers high light output from a compact form factor and is designed to provide a more durable and long lived alternative to halogen and metal halide units. This 60 watt remote control RGB LED light produces a wide flood beam in a variety of colors and configurations without the high heat, fragile construction, or high energy costs of traditional lighting.

Image

The LEDWP-600-RGB color changing LED wall pack light from Larson Electronics produces a colorful flood beam while drawing only 0.5 amps at 120 VAC. The light assembly consists of forty-five LEDs paired with high purity specular optics to produce a wide light distribution overpowering that of a 500 watt quartz flood lights. This light is constructed of three angled boards that helps provide a wider spread. Instead of the light only shining forward, the center board is concentrated to go straight out while the boards on the side are 45° offset. This LED wall pack is designed to withstand demanding conditions and is waterproof, vapor proof, and built to resist the damaging effects of an outdoor environment.

This color changing LED flood light is an RGB unit, meaning it can produce red, green and blue light of varying levels and intensity. Operators scroll through various colors by using an included handheld remote. This LED light is also dimmable, and can be set to operate in different modes including steady burn, flash, strobe, color fade, and smooth fade. Users can also turn the lamp on/off via remote control. This floodlight has internal memory and will remember the last set configuration when power is cut via light switch or unplugging the lamp. This high output LED flood light is an ideal replacement for high temperature incandescent, fluorescent, and metal halide lamps without fragile design, high energy consumption, and need for colored filters or special coatings as seen with traditional lighting.

The LEDWP-600-RGB consists of forty-five LEDs housed within a waterproof aluminum housing that is powder coated for added durability and resistance to corrosion. Each LED chip contains individual red, blue, and green diodes to produce a full spectrum of color choices. The housing incorporates integral cooling fins for efficient heat dissipation and increased LED longevity. The LED lamp assembly is protected by a shatterproof polycarbonate lens which is secured to the housing with a waterproof seal. A 1/2' waterproof connector provides a secure and sealed power connection point and rounds out this unit's weather resistant construction.

The remote control included with this multi color LED lamp is an wireless control unit with a working distance of 25 feet. This remote control capability is ideal for operators who install these LED flood lights in hard to reach or elevated locations, allowing them to change the color and operating modes of the lamp quickly and easily.

Mounting hardware for the LEDWP-600-RGB consists of a stainless steel coated bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion. The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position the unit as desired once mounted. This unit is designed to operate with voltages ranging from 110 VAC to 277 VAC 50/60 Hz, providing versatile power connection options. The LEDWP-600-RGB provides an efficient and highly durable alternative to standard quartz and and halogen wall pack lights that produces a longer reaching beam while using only a fraction of the power.

With the LEDWP-600-RGB there is no warm up period, the light can be cycled on and off without any reduction in lamp life, there is no glass or filament to shatter or break, and the solid state LED design provides 50,000 hours of operation. The LEDWP-600-RGB is ideal for landscape lighting, aesthetic lighting, wall pack lighting, down lighting, upwards lighting, event lighting, restaurants, monuments, marinas, docks, billboards, and any application requiring a high output colored LED flood light.

  • LEDWP-600-RGB Wall Pack Light
  • Lamp Type: RGB LED
  • Dimensions: W-9'   D-3.25'   H-6.5'
  • Watts: 60
  • Lumens: 5400
  • Voltage: 110-277 Volts AC 50/60hz
  • Lighting Configuration: Flood - Steady, strobe, flash cycle
  • Operation: Remote Control
  • Mounting: Adjustable Bracket
  • Wiring: 17' Pigtail
  • Amps: 0.5
  • LED Light Color: Color Changing: Red/Green/Blue
  • LED Life Expectancy: 50,000 hours
  • Materials: Aluminum Housing, Polycarbonate Lens
  • Weight: 8.3 Lbs.

  • LEDWP-600-RGB Features
  • Waterproof/Vapor Proof
  • Operates on Standard 110-277 VAC
  • Impact/Vibration Resistant Construction
  • 50,000 Hour LED Life
  • ETL Approved for Wet Locations
  • IP68 Waterproof
  • Color Changing LED Flood Light
  • Remote Control Adjustability

Customer reviews

No reviews were found for Larson - Model LEDWP-600-RGB - Color Changing LED Wall Pack Light. Be the first to review!