- Emergency Leak Repair Kits

From

0

When a pipe, tank or drum springs a leak, time is of the essence. That’s especially true if it contains hazardous product. Major repairs can take considerable time. Fortunately, InduMar provides emergency repair kits that can plug the holes until major repairs can be made. These kits keep you and your company safe even when pipes, tanks or drums let you down.

Image

The First Response Leak Repair Kit provides everything needed for maintenance and safety teams to respond quickly to most common leaks, cracks, and gashes in pipes, tanks and drums.

Each kit includes

  • A small, medium, and large size of the STOP IT Pipe Repair System
  • Five Fix Stix epoxy units
  • 18 assorted wooden plugs
  • Rubber hammer
  • Two Plug-N-Dike Plug Rugs
  • Three Plug Patties
  • Lead wool filler pack
  • Hot/cold hose repair tape

Everything in one box for maintenance and safety teams to quickly respond to most common leaks, cracks, and gashes in pipes, drums and tanks. Each kit includes a small, medium and large size of the Stop It Pipe Repair System, five Fix Stix epoxy, 18 assorted wooden plugs, rubber hammer, two Plug-N-Dike Plug Rugs, three Plug Patties, lead wool filler pack, hot/cold hose repair tape.

Image

For hazardous-material leaks in any type of low-pressure vessel, universal kits contain everything needed to patch cracks, gashes and holes of all shapes in tanks and drums. All bolts, back-up plates, and hardware are manufactured from 304 stainless steel.

  • Kit “D” contains two toggle-bolt ball plugs, six toggle-bolt surface plugs, two T-bolt crack patches, five self-tapping screw patches, nine assorted wooden plugs, Fix Stix epoxy, Plug-N-Dike Plug Pattie, lead wool pack, hot/cold hose repair tape, sorbent pad, tubeless tire repair kit, 8” x 12” solid neoprene and 20” x 20” closed-cell foam gasket material, steel drift pin, OSHA-approved 200’ roll of barricade tape, tools for installing all patches, and heavy duty carrying case.
  • Kit “AE” contains all the items listed for kit “D,” plus items for larger holes, cracks and gashes. These include one 8” x 12” stainless steel plate lined with ¾”-thick soft neoprene material and three T-bolts with preassembled wingnut washer combos. A second 8” x 12” stainless-steel neoprene-backed plate is included with hardwood cribbing ladder patch and two 22’ heavy-duty nylon straps.

Designed to quickly respond to leaks in straight runs of piping. Simply snap the clamp around the pipe, drop bolt head through open-slotted lug, and tighten nuts. Versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.

  • Repair clamps are made of corrosion-resistant 304 stainless steel, lugs are made of rugged-ductile iron and shop coated for added protection. Bolts are plated for longer life. A choice of gasket material offers superior resistance to oils, aromatic and aliphatic hydrocarbons, condensates, gasoline and natural gas.
  • All External Pipe Leak Control Kits include extra-solid neoprene and closed-cell foam gasket material for odd-sized, out-of-round, and corroded pipe applications. Accompanying tools are available in standard or non-sparking versions. Kits are packaged in a heavy-duty carrying case.
  • Series “C-2” contains 10 assorted clamps for ½” through 4” diameter pipe, extra gasket material and installation tools. Clamp sizes are 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, 4”.
  • SERIES “C-3” contains three large clamps for 5”, 6” and 8” diameter pipe, extra gasket material and installation tools. Clamp sizes are 5”, 6” and 8”.

Image

Quickly plugs open-ended pipes, allowing you to instantly plug knocked-off pipes carrying water, fuel, chemicals and gas. Great for knocked-off gas meters and tank truck discharge valves.

  • 1” to 5” sizes have pressure-relief vents to help get the plugs seated under pressure. Pressure relief vents on 1 1/2” through 5” plugs can connect to enclosed valve and discharge hose. This enables fluid or gas to be rerouted to another line, discharged to a recovery vessel or flared. The Pipe Plugger Kit can also be used for drain line cleaning and nitrogen purging operations.
  • SERIES “C-1” contains 10 stainless steel pipe plugs, wooden plug, valve and discharge hose set, all necessary tools for installation and heavy-duty carrying case. Plug sizes are 3/4”, 1”, 1 1/4”, 1 1/2”, 1 3/4”, 2”, 2 1/2”, 3”, 4”. A separate 5” “C-1” plug is also available.

Covers a large hole, crack, or gash in a large vessel or tank with a patch that conforms to the curvature of the vessel. The patch uses a variety of T-bolts to support itself directly to the hole. The leak is then sealed by tightening the compression bolts around the frame, conforming the patch to the vessel.

Series “F” contains one stainless-steel patch measuring 13” x 23” with 3/4” neoprene gasket. One stainless-steel support frame with compression bolts, three stainless-steel T-bolts with preassembled wingnut washer combos, all necessary tools and heavy-duty carrying case.

Image

Universal kits are designed to plug hazardous material leaks in any type of low-pressure vessel. The kits contain everything needed to respond to leaks in tanks and drums. The wide variety of sealing devices and materials address surface holes of all shapes, as well as cracks and gashes. All bolts, back-up plates, and hardware is constructed from 304 stainless steel. Accompanying tools are available in standard or non-sparking versions.

Kits AE and D contain

  • Two toggle-bolt ball plugs
  • Six toggle-bolt surface plugs
  • Two T-bolt crack patches
  • Five self tapping screw patches
  • Nine assorted wooden plugs
  • Fix Stix epoxy
  • Plug-N-Dike Plug Pattie
  • Lead wool filler pack
  • Hot/cold hose repair tape
  • Sorbent pad
  • Tubeless tire repair kit
  • 8” x 12” solid neoprene and 20” x 20” closed-cell foam gasketing material
  • Steel drift pin
  • OSHA approved 200’ roll of barricade tape
  • Tools for installing all patches
  • Heavy duty carrying case
  • Kit AE: Contains items for larger holes, cracks and gashes in addition to the standard items listed above. These include one 8” x 12” stainless steel plate lined with 3/4” thick soft neoprene material and three T-bolts with preassembled wingnut washer combos. A second 8” x 12” stainless steel neoprene backed plate is included with hardwood cribbing ladder patch and two 22’ heavy-duty nylon straps.
  • Kits C-2 and C-3: These versatile clamps respond to water, wastewater, fuel, chemical, air and gas leaks.
  • Series C-2: Contains ten assorted clamps for 1/2” through 4” diameter pipe, extra gasketing material and installation tools.
    Clamp sizes are 1/2”, 3/4”, 1”, 1 1/4”, 1 1/2”, 2”, 2 1/2”, 3”, 3 1/2”, 4”.
  • Series C-3: Contains three large clamps for 5”, 6” and 8” diameter pipe, extra gasketing material and installation tools.
    Clamp sizes are 5”, 6” and 8”.
  • Kit F: Designed to patch a large hole, crack, or gash in a large vessel or tank. The kit has a patch that conforms to the curvature of the vessel and the patch uses a variety of T-bolts to support itself directly to the hole. The leak is then sealed by tightening the compression bolts around the frame, conforming the patch to the vessel.

Customer reviews

No reviews were found for First Response - Emergency Leak Repair Kits. Be the first to review!