Lely

- Model PT - Trailed Round Bale Wrappers

From

0

Immediate wrapping of the bale ensures an airtight seal allowing the fermentation process to begin as soon as possible. The bale is not opened until it’s needed. Heating and decay are avoided and top quality fodder is produced. The Lely Attis PT models are trailed round bale wrappers with a turntable. The loading arm places the bale on the turntable and the bale guides keep it firmly in position. Thus, the wrapping process can continue when on the move. Due to the exceptionally low bale discharge, film damage is avoided.

Fast pick-up and gentle discharge of bales

Lely Attis round bale wrappers are fitted with different systems to pick up and lower bales. Yet they have two things in common. They place the bale on the wrapping table effortlessly, without impairing the shape of the bale and the bale is always lowered gently to the ground avoiding film damage. Both the Attis PT and PS 160 models allow simultaneous transport of bales on the wrapping table and on the loading arm.

Secure bale pick-up with a strong loading arm

The build of the rugged loading arm is very solid and it ensures that bales are placed on the wrapping table without effort and in one single movement. The PT 160 model has an adjustable loading arm allowing the machine to pick up both large and small bales.

Corrective in-line loading system

The in-line loading arms of the Attis PS 160 open wide and pick the bale up easily even at high speeds. As soon as a bale is in position, the arms are closed in a tight grip, lifting the bale onto the wrapping table in one sequence. The arms ensure that bales, which are not well positioned, are correctly presented at the front of the wrapping table.

Driving when wrapping

The bale guides keep the bale in a firm position on the wrapping table. This makes it possible to drive during wrapping. The bale remains firmly positioned on the wrapping table, even in hilly conditions.

Gentle discharge of bales due to the low position of the wrapping table

The position of the wrapping table of the PT 130 and PS 160 models is exceptionally low. After the wrapping process, the table tilts backwards and gently rolls the bale onto the ground. This eliminates the risk of film damage

Active bale discharge system on PT 160

The Attis PT 160 features an active bale discharge system. When the bale is wrapped the wrapping table tips backwards and releases the bale on to the active bale discharge system which is raised. It then gently lowers the bale to the ground.

Lely have developed two turntable trailed wrapper models with a loading arm. The PT 130 is the basic model featuring a rugged loading arm, exceptionally low wrapping table and semi‑automatic control.

Tremendous output

The Lely Attis PT 130 is fitted with a loading arm that can place bales with a diameter of up to 130 cm and a weight of up to 1,000 kg on the wrapping table in one sequence. The bale guides keep the bale firmly positioned on the wrapping table so that the wrapping process continues while moving on to the next bale. Depending upon the number of film layers, these wrappers can wrap up to 60 bales per hour.

Always the correct number of film layers

The Lely Attis PT 130 is equipped with an E-Link Basic semi-automatic control unit for automatic operation or for using each function individually, i.e. loading, wrapping, cutting film and discharging. A rotation counter gives the operator an acoustic signal once the wrapping table has completed the correct number of rotations. When the operator stops the wrapping table, the film clamp closes and the wrapping table is tilted backwards.

Adjustable pre-stretch system saves film

The pre-stretchers can be fitted with 500 mm or 750 mm film rollers. The adjustable pre-stretch system saves film and ensures that the film is wrapped tightly around the bale. Thanks to a quick lock system an empty film roll can be replaced quickly and easily. The draw bar has the capacity to carry three additional rolls of film.

Compact on the road

Switching from a working position into a compact transport position is easy. Simply lift the right-hand rear wheel with the loading arm and change the wheel position. This reduces the track width by 35 cm.

Gently lowering to the ground

Due to the exceptionally low build of the PT 130 model, the wrapped bale is lowered to the ground gently after the wrapping table is tilted backwards.

Solid construction for intensive use

The simple yet outstandingly rugged construction of the frame, combined with the robust steel tubing, ensures long machine life.

E-link Basic

The Lely Attis PT 130 is equipped with an E-link Basic semi-automatic control to steer an automatic program or each separate function.

Lely Attis PT 160

Due to the wide variation in bale sizes, the Lely Attis PT 160 bale wrapper is the most versatile wrapper in today's market place. This bale wrapper includes fully automatic controls and an active bale discharge system; it can also transport a second bale.

A versatile wrapper

The Lely Attis PT 160 bale wrapper is the most versatile wrapper in today's market place. Due to the adjustable bale guides, bale widths can be varied between 125 cm and 150 cm. The adjustable loading arm will load bales with a diameter from 90 to 160 cm onto the wrapping table in one sequence. As the pre-stretcher is height-adjustable, this wrapper can always wrap the film across the centre of the bale irrespective of bale size.

Always the correct number of film layers

The Lely Attis PT 160 is fitted with an E-link Plus fully automatic control unit. The wrapping program can be configured according to the operator's individual wishes and each function can also be controlled manually. With a pause button you can temporarily interrupt the process, if for example you have to negotiate a narrow passage or if you want to unload the bales at a central location.

Smartly engineered film holders save costs

The PT 160 wrapper is equipped with a pre-stretcher, which can be fitted with 500 or 750 mm film rollers. The adjustable pre-stretchers ensure a pre-stretch of 55% or 70%. This saves film and ensures that the film is wrapped tightly around the bale. A sensor warns the operator if the film breaks or when it needs to be replaced. Thanks to the quick lock system an empty film roll can be replaced quickly and easily. The draw bar has the capacity to carry three additional rolls of film.

Solid construction for intensive use

The simple and exceptionally reliable frame construction ensures long machine life. Wherever possible, steel tubes were manufactured from one piece of steel rather than welding thus reducing welding seams to the bare minimum.

Gently lowering onto the ground

The Attis PT 160 features an active bale discharge system. As soon as the wrapping table tips backwards, the active bale discharge system is raised and takes over the bale from the wrapping table. The film is cut off neatly and held in position for the next bale. Subsequently, the bale discharge system lowers the bale gently to the ground thus avoiding damage to the film. This discharge system can also be fitted with a bale tipper allowing the operator to tip the bale on its end.

Transporting a second bale

It is possible to carry a second bale on the loading arm.

Counter-weight for enhanced stability

With its low centre of gravity and counterweight for enhanced stability, the PT 160 is ideally suited for working on slopes.

Compact transport position

By folding up the loading arm, the PT 160 is quickly ready for transport. The compact design ensures the machine is narrow for transport and it also requires little space for storage.

Customer reviews

No reviews were found for Lely Attis - Model PT - Trailed Round Bale Wrappers. Be the first to review!