Lenntech Water Treatment

- Model Series - Tap / Low Brackish Water Reverse Osmosis System 5 m³/h, 10 m³/h, 20 m³/h, 50 m³/h

From

0

Lenntech large reverse osmosis systems provide low conductivity water from tap water and low brackish water. Lenntech units are ready-to-use, skid mounted, easy to operate. Compact design, low energy demand and high recovery; Fully automatic system, microprocessor controlled.

  • 5-micron cartridge filter;
  • High pressure pump;
  • Permeate conductivity indicated in the front panel display;
  • High performance Dow membranes;
  • Fiberglass pressure vessels;
  • Permeate and concentrate flow meters;
  • Pressure indicators;
  • Low pressure switch before the HPP;
  • Control cabinet fully automatic;
  • CIP connections;
  • PVC piping
  • Needle valves, high pressure throttle valve, high pressure check valve in stainless steel.

  • Feed pump
  • Antiscalant dosing system;
  • Softener;
  • CIP station.

  • Total dissolved solids: Max. 1000 ppm
  • pH value continuously: 2-11
  • pH short time during cleaning: 1-12
  • Dissolved iron: <0.05 ppm
  • Dissolved manganese: <0.05 ppm
  • Free chlorine (continuously): <0.1 ppm
  • Oil and grease: <0.1 ppm
  • COD: <10 mg/l
  • Silt Density Index SDI15: <3
  • Turbidity: <1NTU
  • Pre-pressure: Min. 2 bar - max. 4 bar:
  • Temperature: Min: 15°C-max25°C

Customer reviews

No reviews were found for LennRO - Model Series - Tap / Low Brackish Water Reverse Osmosis System 5 m³/h, 10 m³/h, 20 m³/h, 50 m³/h. Be the first to review!